References
[1] Filali S., Nasser A., “Concrete production using marble powder and marble coarse aggregates: an analysis of mechanical properties and sustainability”, Budownictwo i Architektura, 23(4), (2024), 63–81. https://doi.org/10.35784/bud-arch.6286
[2] Scrivener K., Martirena F., Bishnoi S., Maity S., “Calcined clay limestone cements (LC3)”, Cement and Concrete Research, 114, (2018), 49–56. https://doi.org/10.1016/j.cemconres.2017.08.017
[3] Bui N. K., Kurihara R., Kotaka W., et al., “Effects of particle size distribution on the performance of calcium carbonate concrete”, Journal of Advanced Concrete Technology, 20(11), (2022), 691–702. https://doi.org/10.3151/jact.20.691
[4] Hay R., Peng B., Celik K., “Filler effects of CaCO3 polymorphs derived from limestone and seashell on hydration and carbonation of reactive magnesium oxide (MgO) cement (RMC)”, Cement and Concrete Research, 164, (2023), 107040. https://doi.org/10.1016/j.cemconres.2022.107040
[5] Fakhri R. S., Dawood E.T., “Influence of binary blended cement containing slag and limestone powder to produce sustainable mortar”, AIP Conference Proceedings, AIP Publishing LLC (2023), 20028. https://doi.org/10.1063/5.0171499
[6] Liew J. J., Cheah C. B., Khaw K. L. P., Siddique R., Tangchirapat W., “Blended cement and mortar with various low-calcium ground coal bottom ash content: Engineering characteristics, embodied carbon and cost analysis”, Construction and Building Materials, 425, (2024), 135987. https://doi.org/10.1016/j.conbuildmat.2024.135987
[7] Scrivener K. L., John V. M., Gartner E. M., “Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry”, Cement and Concrete Research, 114, (2018), 2–26. https://doi.org/10.1016/j.cemconres.2018.03.015
[8] Sanytsky M., Kropyvnytska T., Ivashchyshyn H., Rykhlitska О., “Eco-efficient blended cements with high volume supplementary cementitious materials”, Budownictwo i Architektura, 18(4), (2020), 005–014. https://doi.org/10.35784/bud-arch.816
[9] Fakhri R. S., Dawood E. T., “Properties evaluation of green mortar containing waste materials”, ASEAN Engineering Journal, 13(2), (2023), 115–123. https://doi.org/10.11113/aej.v13.18986
[10] Zhang Y., Ying Y., Xing L., et al., “Carbon dioxide reduction through mineral carbonation by steel slag”, Journal of Environmental Sciences (China), 152, (2025), 664–684. https://doi.org/10.1016/j.jes.2024.06.016
[11] Zhang R., Scott A. N., Panesar D. K., “Carbonation and CO₂ reabsorption of cement-based materials: Influence of limestone filler and ground-granulated blast-furnace slag”, Construction and Building Materials, 416, (2024), 135166. https://doi.org/10.1016/j.conbuildmat.2024.135166
[12] Sathiparan N., Jaasim J. H. M., Banujan B., “Sustainable production of cement masonry blocks with the combined use of fly ash and quarry waste”, Materialia, 26, (2022), 101621. https://doi.org/10.1016/j.mtla.2022.101621
[13] Tong L., Lihua Z., Bentian Y., Tong L., “Experimental studies to investigate efficacies of granite porphyry powder as homologous manufactured sand substitute”, Journal of Advanced Concrete Technology, 21(4), (2023), 307–321.
[14] Altheeb A., “Quarry dust waste-based cementitious composites – A comprehensive review”, Construction and Building Materials, 350, (2022), 128817. https://doi.org/10.1016/j.conbuildmat.2022.128817
[15] Dhandapani Y., Santhanam M., Kaladharan G., Ramanathan S., “Towards ternary binders involving limestone additions – A review”, Cement and Concrete Research, 143, (2021), 106396. https://doi.org/10.1016/j.cemconres.2021.106396
[16] Sakai E., Masuda K., Kakinuma Y., Aikawa Y., “Effects of shape and packing density of powder particles on the fluidity of cement pastes with limestone powder”, Journal of Advanced Concrete Technology, 7(3), (2009), 347–354. https://doi.org/10.3151/jact.7.347
[17] Li B., Zhou M., Wang J., “Effect of the methylene blue value of manufactured sand on performances of concrete”, Journal of Advanced Concrete Technology, 9(2), (2011), 127–132.
[18] Safiddine S., Amokrane K., Debieb F., Soualhi H., Benabed B., Kadri E. H., “How quarry waste limestone filler affects the rheological behavior of cement-based materials”, Applied Rheology, 31(1), (2021), 63–75. https://doi.org/10.1515/arh-2020-0118
[19] Cepuritis R., Jacobsen S., Pedersen B., Mørtsell E., “Crushed sand in concrete - Effect of particle shape in different fractions and filler properties on rheology”, Cement and Concrete Composites, 71, (2016), 26–41. https://doi.org/10.1016/j.cemconcomp.2016.04.004
[20] Nguyen D. T., Nguyen D. L., Ngoc-Tra Lam M., “An experimental investigation on the utilization of crushed sand in improving workability and mechanical resistance of concrete”, Construction and Building Materials, 326, (2022), 126766. https://doi.org/10.1016/j.conbuildmat.2022.126766
[21] Zhu J., Zhou Y., Li C., et al., “A qualitative approach to describe the viscosity of flowable concrete made with manufactured sand containing different microfines”, Construction and Building Materials, 451, (2024), 138858. https://doi.org/10.1016/j.conbuildmat.2024.138858
[22] Jiang Z., Yang Q., Wang B., Li C., Zhang J., Ren Q., “Limestone filler as a mineral additive on the compressive strength and durability of self-compacting concrete with limestone manufactured sand”, Journal of Building Engineering 94(March), 2024, pp. 109965.
[23] Dargahi M., Sorelli L., “Micro-scale uniaxial compression assessment of hygro-thermo-mechanical interactions in limestone-filler cement paste at low water-to-fine ratio”, Cement and Concrete Composites, 163, (2025), 106194. https://doi.org/10.1016/j.cemconcomp.2025.106194
[24] Xu H., Huang Y., Feng S., et al., “Utilization of limestone powder and silica fume as sustainable cement replacements in shotcrete: Experimental, molecular dynamics simulations, and microstructural analysis”, Powder Technology, 467, (2026), 121493. https://doi.org/10.1016/j.powtec.2025.121493
[25] Zhang M., Lv H., Jiang Q., Wu Y., Yang Y., Dai H., “Study on flexural behavior of laminated slabs constructed with composite limestone powder-tailings mixed sand concrete”, Structures, 77, (2025), 109169. https://doi.org/10.1016/j.istruc.2025.109169
[26] EN 1015-11:2019: Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar.
[27] Schwartzentruber A., Catherine C., “Method of the concrete equivalent mortar(CEM)--a new tool to design concrete containing admixture”, Materials and Structures(France), 33(232), (2000), 475–482.
[28] Soualhi H., Kadri E. H., Ngo T. T., Bouvet A., Cussigh F., Kenai S., “A vane rheometer for fresh mortar: Development and validation”, Applied Rheology, 24(2), (2014), 1–7. http://doi.org/10.3933/ApplRheol-24-22594
[29] Mazouz B., Abderraouf A., Berkouche A., et al., “Modeling and optimization for the combined valorization of calcined sediments and ground blast-furnace slag in eco-mortar formulations: Rheological , mechanical , microstructural , and environmental assessments”, Structures, 80, (2025), 109984. https://doi.org/10.1016/j.istruc.2025.109984
[30] Zhang Z., Gao Y., Qin F., Sun F., Huang Y., “Mechanical properties of sustainable high strength ECC with substitution of cement by limestone powder”, Case Studies in Construction Materials, 19, (2023), e02434. https://doi.org/10.1016/j.cscm.2023.e02434
[31] Komnitsas K., Zaharaki D., Vlachou A., Bartzas G., Galetakis M., “Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers”, Advanced Powder Technology, 26(2), (2015), 368–376. https://doi.org/10.1016/j.apt.2014.11.012
[32] Mohammed S., Elhem G., Mekki B., “Valorization of pozzolanicity of Algerian clay: Optimization of the heat treatment and mechanical characteristics of the involved cement mortars”, Applied Clay Science, 132–133, (2016), 711–721. https://doi.org/10.1016/j.clay.2016.08.027
[33] Liu T., Gong C., Duan L.C., Qu B., “Effects of sodium citrate on compressive strength and microstructure of NaOH-activated fly ash/slag cement exposed to high temperature”, Construction and Building Materials, 363, (2023), 129852. https://doi.org/10.1016/j.conbuildmat.2022.129852
[34] Lecomte I., Henrist C., Liégeois M., Maseri F., Rulmont A., Cloots R., “(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement”, Journal of the European Ceramic Society, 26(16), (2006), 3789–3797. https://doi.org/10.1016/j.jeurceramsoc.2005.12.021
[35] Nehdi M., Mindess S., Aıtcin P. C., “Rheology of high-performance concrete: effect of ultrafine particles.”, Cement and Concrete Research, 43, (1998), 1–9. https://doi.org/10.1016/S0008-8846(98)00022-2
[36] Safiddine S., Debieb F., Kadri E. H., Menadi B., Soualhi H., “Effect of crushed sand and limestone crushed sand dust on the rheology of cement mortar”, Applied Rheology, 27, (2017), 1–9. http://doi.org/10.3933/ApplRheol-27-14490
[37] Safiddine S., Soualhi H., Benabed B., Belaidi A. S. E., Kadri E. -H., “Effect of different supplementary cementitious materials and superplasticizers on rheological behavior of eco-friendly mortars”, Epitoanyag - Journal of Silicate Based and Composite Materials, 73(3), (2021), 119–129.
[38] Xie D., Liu Q., Zhou Z., Gao J., Liu C., “Rheology and hardened properties of eco-friendly ultra-high performance concrete paste: Role of waste stone powder fillers”, Construction and Building Materials, 447, (2024), 138163. https://doi.org/10.1016/j.conbuildmat.2024.138163
[39] Moon G. D., Oh S., Jung S. H., Choi Y. C., “Effects of the fineness of limestone powder and cement on the hydration and strength development of PLC concrete”, Construction and Building Materials, 135, (2017), 129–136. https://doi.org/10.1016/j.conbuildmat.2016.12.189