Vol. 12 No. 1 (2013) | Budownictwo i Architektura / Civil and Architectural Engineering

Economic criteria for the selection of wall formwork

Sławomir Biruk, Piotr Jaśkowski

DOI: https://doi.org/10.35784/bud-arch.2157

007-014

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2157

Determination of the residential renovation range

Robert Bucoń, Anna Sobotka

DOI: https://doi.org/10.35784/bud-arch.2158

015-022

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2158

Time-Cost Relationship for Predicting Construction Duration

Agata Czarnigowska, Anna Sobotka

DOI: https://doi.org/10.35784/bud-arch.2160

023-030

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2160

Employing multi criteria optimisation methods for risk assessment of damage to bridge objects

Artur Duchaczek, Dariusz Skorupka

DOI: https://doi.org/10.35784/bud-arch.2161

031-038

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2161

Labor demand as a key factor in building process planning

Roman Marcinkowski

DOI: https://doi.org/10.35784/bud-arch.2163

039-046

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2163

Scheduling of building projects taking into account the time buffers determined on the basis of risk analysis

Mieczysław Połoński

DOI: https://doi.org/10.35784/bud-arch.2164

047-052

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2164

Preliminary identification and evaluation of parameters affecting the capacity of the operator-earthmoving machine system

Elżbieta Radziszewska-Zielina, Anna Sobotka, Edyta Plebankiewicz, Krzysztof Zima

DOI: https://doi.org/10.35784/bud-arch.2173

053-060

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2173

The cost analysis of steel halls designing, according to environmental standards, legal guidelines and market prices

Magdalena Rogalska, Zdzisław Hejducki

DOI: https://doi.org/10.35784/bud-arch.2174

061-068

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2174

The use of fuzzy databases and knowledge bases for aiding engineering projects

Janusz Szelka, Zbigniew Wrona

DOI: https://doi.org/10.35784/bud-arch.2175

069-076

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2175

Integrating Construction Process Documentation with the use of Building Information Modeling

Krzysztof Zima

DOI: https://doi.org/10.35784/bud-arch.2176

077-084

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2176

The influence of steel yielding of main reinforcement on bending capacity of beams strengthened with CFRP strips

Przemysław Bodzak

DOI: https://doi.org/10.35784/bud-arch.2177

085-090

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2177

Applications of truss topology optimization in the design of reinforced concrete structures using „Strut and Tie” models

Karol Bołbotowski, Michał Knauff, Tomasz Sokół

DOI: https://doi.org/10.35784/bud-arch.2178

091-098

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2178

The reliability of the support zone of beams formed with the use of ST models

Lidia Buda-Ożóg

DOI: https://doi.org/10.35784/bud-arch.2179

099-106

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2179

Influence of concrete topping on behaviour of prestressed Hollow Core floor slabs on flexible supports

Wit Derkowski, Mateusz Surma

DOI: https://doi.org/10.35784/bud-arch.2180

107-114

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2180

The influence of reinforcement temperature on stiffness of reinforced concrete beams in fire conditions

Michał Głowacki, Marian Abramowicz, Robert Kowalski

DOI: https://doi.org/10.35784/bud-arch.2181

115-122

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2181

The method of analysis of a reinforced concrete section under bending in the post-yield range

Jacek Korentz

DOI: https://doi.org/10.35784/bud-arch.2182

123-130

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2182

Efficiency analysis of strengthening of RC structures with prestressed CFRP composites

Renata Kotynia, Michał Staśkiewicz

DOI: https://doi.org/10.35784/bud-arch.2184

131-138

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2184

Diagonal crack width towards the experimental results

Rafał Ostromęcki

DOI: https://doi.org/10.35784/bud-arch.2185

139-146

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2185

The Influence of Concrete Strength on Shear Capacity of Reinforced Concrete Members without Shear Reinforcement

Marta Słowik

DOI: https://doi.org/10.35784/bud-arch.2186

151-158

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2186

Serviceability limit states of high performance reinforced concrete beams with hybrid fibre

Piotr Smarzewski

DOI: https://doi.org/10.35784/bud-arch.2187

155-162

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2187

The deformability of compressed concrete elements strengthened with FRCM composite materials

Tomasz Trapko

DOI: https://doi.org/10.35784/bud-arch.2188

163-170

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2188

Control of the transmission length in the prestressed hollow-core slabs using values of the strand end slip

Victor Tur, Stanisław Fic

DOI: https://doi.org/10.35784/bud-arch.2189

171-178

PDF

DOI: https://doi.org/10.35784/bud-arch.2189

The structural fire design of concrete structures with externally bonded reinforcement and fire protection system

Piotr Turkowski

DOI: https://doi.org/10.35784/bud-arch.2190

179-186

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2190

The experimental investigations of RC internal columns in the connection zone with lightweight concrete slab

Tadeusz Urban, Michał Gołdyn, Łukasz Krawczyk

DOI: https://doi.org/10.35784/bud-arch.2191

187-194

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2191

The analysis of the effectiveness of different types of punching shear reinforcement not fully anchored

Tadeusz Urban, Michał Gołdyn, Łukasz Krawczyk

DOI: https://doi.org/10.35784/bud-arch.2192

195-202

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2192

The evaluation of uncertainty in the resistance models of reinforced concrete members

Szczepan Woliński

DOI: https://doi.org/10.35784/bud-arch.2199

203-210

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2199

Wind Tunnel Measurements of Aeroelastic Guyed Mast Models

Jarosław Bęc, Tomasz Lipecki, Ewa Błazik-Borowa

DOI: https://doi.org/10.35784/bud-arch.2200

211-218

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2200

The proposal of explicit account of the random character of design process parameters

Agnieszka Dudzik, Urszula Radoń

DOI: https://doi.org/10.35784/bud-arch.2201

219-226

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2201

Contribution to the diagnostics of rock bolts using elastic wave propagation

Magdalena Rucka

DOI: https://doi.org/10.35784/bud-arch.2203

227-234

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2203

The numerical analysis of micro-damage evolution in damaged element with structural discontinuity

Paweł Kossakowski

DOI: https://doi.org/10.35784/bud-arch.2204

235-242

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2204

Diagnostics of concrete plate in bending with ultrasonic waves modulated by low frequency oscillations

Błażej Meronk, Krzysztof Wilde

DOI: https://doi.org/10.35784/bud-arch.2205

243-250

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2205

Fracture toughness of old bridge steel

Eliza Mytych-Kumańska, Paweł Kossakowski

DOI: https://doi.org/10.35784/bud-arch.2206

251-258

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2206

Effect of random track irregularities on selected composite bridge / track structure / high-speed train system vibrations

Monika Podworna, Marian Klasztorny

DOI: https://doi.org/10.35784/bud-arch.2207

259-266

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2207

The analysis of the deformation of node in a modular scaffolding system

Michał Pieńko

DOI: https://doi.org/10.35784/bud-arch.2208

267-274

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2208

The analysis of stresses and displacements in the aluminium structure with replaceable elements

Beata Potrzeszcz-Sut, Ewa Pabisek

DOI: https://doi.org/10.35784/bud-arch.2210

275-282

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2210

The initial research of dynamic parameters for composite structures containing Zeolite

Jacek Szulej

DOI: https://doi.org/10.35784/bud-arch.2211

283-290

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2211

The tune of mass dampers for the Municipal Stadium in Poznan

Piotr Wielgos

DOI: https://doi.org/10.35784/bud-arch.2212

291-298

PDF (Polish)

DOI: https://doi.org/10.35784/bud-arch.2212

Archives

Articles

Economic criteria for the selection of wall formwork

Determination of the residential renovation range

Time-Cost Relationship for Predicting Construction Duration

Employing multi criteria optimisation methods for risk assessment of damage to bridge objects

Labor demand as a key factor in building process planning

Scheduling of building projects taking into account the time buffers determined on the basis of risk analysis

Preliminary identification and evaluation of parameters affecting the capacity of the operator-earthmoving machine system

The cost analysis of steel halls designing, according to environmental standards, legal guidelines and market prices

The use of fuzzy databases and knowledge bases for aiding engineering projects

Integrating Construction Process Documentation with the use of Building Information Modeling

The influence of steel yielding of main reinforcement on bending capacity of beams strengthened with CFRP strips

Applications of truss topology optimization in the design of reinforced concrete structures using „Strut and Tie” models

The reliability of the support zone of beams formed with the use of ST models

Influence of concrete topping on behaviour of prestressed Hollow Core floor slabs on flexible supports

The influence of reinforcement temperature on stiffness of reinforced concrete beams in fire conditions

The method of analysis of a reinforced concrete section under bending in the post-yield range

Efficiency analysis of strengthening of RC structures with prestressed CFRP composites

Diagonal crack width towards the experimental results

The Influence of Concrete Strength on Shear Capacity of Reinforced Concrete Members without Shear Reinforcement

Serviceability limit states of high performance reinforced concrete beams with hybrid fibre

The deformability of compressed concrete elements strengthened with FRCM composite materials

Control of the transmission length in the prestressed hollow-core slabs using values of the strand end slip

The structural fire design of concrete structures with externally bonded reinforcement and fire protection system

The experimental investigations of RC internal columns in the connection zone with lightweight concrete slab

The analysis of the effectiveness of different types of punching shear reinforcement not fully anchored

The evaluation of uncertainty in the resistance models of reinforced concrete members

Wind Tunnel Measurements of Aeroelastic Guyed Mast Models

The proposal of explicit account of the random character of design process parameters

Contribution to the diagnostics of rock bolts using elastic wave propagation

The numerical analysis of micro-damage evolution in damaged element with structural discontinuity

Diagnostics of concrete plate in bending with ultrasonic waves modulated by low frequency oscillations

Fracture toughness of old bridge steel

Effect of random track irregularities on selected composite bridge / track structure / high-speed train system vibrations

The analysis of the deformation of node in a modular scaffolding system

The analysis of stresses and displacements in the aluminium structure with replaceable elements

The initial research of dynamic parameters for composite structures containing Zeolite

The tune of mass dampers for the Municipal Stadium in Poznan