USING OF PROGRAM COMPLEX “DEFORM 2D/3D” IN SCIENTIFIC WORK IN THE DEVELOPMENT OF NEW INNOVATIVE TECHNOLOGIES
Sergey Lezhnev
sergey_legnev@mail.ruKaraganda state industrial university, Temirtau, Republic of Kazakhstan (Kazakhstan)
Olga Krivtsova
Karaganda state industrial university, Temirtau, Republic of Kazakhstan (Kazakhstan)
Evgeniy Panin
Karaganda state industrial university, Temirtau, Republic of Kazakhstan (Kazakhstan)
Abstract
This article provides information about the software package DEFORM 2D/3D, used for the simulation of metal forming processes. Describes the various models developed by this program.
Keywords:
computer modeling, metal product industriesReferences
Anderson R., Richardson A.: Framework to raise value-adding capabilities of members. Forging Technology 11/2002, 4–6.
Google Scholar
Benchmarks Summary and Comparison of Results. International Conference “Metal Forming Process Simulation in Industry” Stuttgart, 1994.
Google Scholar
Biba N.V., Stebunov S.А.: QForm - program designed for technologists. Forging and stamping production. Metal Forming 9/2004, 38–41.
Google Scholar
Chumachenko Е.N., Polyakova Т.V., Aksenov S.А.: Mathematical modeling of non-linear mechanics. IKI RAS, Moscow 2009.
Google Scholar
Harlamov А., Uvarov А.: DEFORM - software package for the simulation of metal forming processes. CAD and Graphics 6/2003, 27–29.
Google Scholar
Ilyushkin М.V.: Modeling of metal forming processes in the program ANSYS. LS-DYNA. ULSU, Ulyanovsk 2012.
Google Scholar
Storozhev М.V.: Popov Е.А.: Theory of Metal Forming. Mechanical Engineering, Moscow 1971.
Google Scholar
Naizabekov A.B., Lezhnev S.N., Panin E.A. Simulation of the joint ‘rolling-extrusion’ process using equichanneled step die. 17-th International Conference on metallurgy and materials METAL-2008, Ostrava, Czech Republic, 13–15.5.2008. Hradec nad Moravici.
Google Scholar
Naizabekov A.B., Lezhnev S.N., Panin E.A.: Theoretical research of combined process “rolling-pressing” with the use of equal channel echelon matrix. High schools. Ferrous metallurgy 6/2008, 22–26.
Google Scholar
Naizabekov A.B., Nogaev K.A., Lezhnev S.N., Panin E.A.: Investigation of the influence of geometric factors in equal-channel compression on the power parameters of deformation. Technology of production of metals and recycled materials 2/2008, 52–59.
Google Scholar
Authors
Sergey Lezhnevsergey_legnev@mail.ru
Karaganda state industrial university, Temirtau, Republic of Kazakhstan Kazakhstan
Authors
Olga KrivtsovaKaraganda state industrial university, Temirtau, Republic of Kazakhstan Kazakhstan
Authors
Evgeniy PaninKaraganda state industrial university, Temirtau, Republic of Kazakhstan Kazakhstan
Statistics
Abstract views: 213PDF downloads: 83
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Konstantin Solomonov, Sergey Lezhnev, CREATING ALGORITHM FOR SIMULATION OF FORMING FLAT WORKPIECES , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 5 No. 4 (2015)
