GENERATOR TARCZOWY Z MAGNESAMI TRWAŁYMI Z ELEKTRYCZNIE KONTROLOWANYM WZBUDZENIEM

Piotr Paplicki; Paweł Prajzendanc; Marcin Wardach

doi:10.35784/iapgos.2361

PDF

Published: 2020-12-20

DOI: https://doi.org/10.35784/iapgos.2361

Issue Vol. 10 No. 4 (2020)

MODELING ELECTROMAGNETIC NANOSTRUCTURES AND EXPERIMENTING WITH NANOELECTRIC ELEMENTS TO FORM PERIODIC STRUCTURES
Miloslav Steinbauer, Roman Pernica, Jiri Zukal, Radim Kadlec, Tibor Bachorec, Pavel Fiala

4-14
X-RAY DIFFRACTION AND MÖSSBAUER SPECTROSCOPY INVESTIGATIONS OF THE (Al, Ni, Co)-DOPED AgFeO2 SYNTHESIZED BY HYDROTHERMAL METHOD
Karolina Siedliska

15-18
COMPUTER PREDICTION OF TECHNOLOGICAL REGIMES OF RAPID CONE-SHAPED ADSORPTION FILTERS WITH CHEMICAL REGENERATION OF HOMOGENEOUS POROUS LOADS
Andrii Bomba, Yurii Klymyuk, Ihor Prysіazhnіuk

19-24
FREQUENCY RESPONSE OF NORRIS GAP DERIVATIVES AND ITS PROSPERITIES FOR GAS SPECTRA ANALYSIS
Sławomir Cięszczyk

25-28
BIT ERROR NOTIFICATION AND ESTIMATION IN REDUNDANT SUCCESSIVE-APPROXIMATION ADC
Serhii Zakharchenko , Roman Humeniuk

29-32
DEVELOPMENT OF A MODULAR LIGHT-WEIGHT MANIPULATOR FOR HUMAN-ROBOT INTERACTION IN MEDICAL APPLICATIONS
Adam Kurnicki, Bartłomiej Stańczyk

33-37
TAKING INTO ACCOUNT THE PHASE INSTABILITY OF GENERATORS CAUSED BY THE INFLUENCE OF IONIZING RADIATION OF SPACE ON THE PARAMETERS OF CARRIER FREQUENCY SYNCHRONIZATION SYSTEMS
Oleksandr Turovsky, Sergei Panadiy

38-42
MULTI-CHANNEL DIGITAL-ANALOG SYSTEM BASED ON CURRENT-CURRENT CONVERTERS
Olexiy Azarov, Yevhenii Heneralnytskyi, Nataliia Rybko

43-46
A COMPUTER SYSTEM FOR ACQUISITION AND ANALYSIS OF MEASUREMENT DATA FOR A SKEW ROLLING MILL IN MANUFACTURING STEEL BALLS
Marcin Buczaj, Andrzej Sumorek

47-50
RESEARCH ON A MAGNETIC FIELD SENSOR WITH A FREQUENCY OUTPUT SIGNAL BASED ON A TUNNEL-RESONANCE DIODE
Alexander Osadchuk, Vladimir Osadchuk, Iaroslav Osadchuk

51-56
DIGITAL CONTACT POTENTIAL PROBE IN STUDYING THE DEFORMATION OF DIELECTRIC MATERIALS
Kanstantsin Pantsialeyeu, Anatoly Zharin, Oleg Gusev, Roman Vorobey, Andrey Tyavlovsky, Konstantin Tyavlovsky, Aliaksandr Svistun

57-60
OVERVIEW OF AOI USE IN SURFACE-MOUNT TECHNOLOGY CONTROL
Magdalena Michalska

61-64
AN ELECTRICALLY-CONTROLLED AXIAL-FLUX PERMANENT MAGNET GENERATOR
Piotr Paplicki, Paweł Prajzendanc, Marcin Wardach

65-68
METHOD OF DETERMINING THE COP COEFFICIENT FOR A COOLING SYSTEM
Mariusz Rzasa, Sławomir Pochwała, Sławomir Szymaniec

69-72
THE IMPACT OF DIGITAL PHOTOGRAPHY PROCESSING IN MOBILE APPLICATIONS ON THE QUALITY OF REACH IN SOCIAL MEDIA
Magdalena Paśnikowska-Łukaszuk, Arkadiusz Urzędowski

73-76
USE OF WEB 2.0 TOOLS BY POLISH HEALTH PORTALS
Magdalena Czerwinska

77-82

Authors

Piotr Paplicki

piotr.paplicki@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering/ Department of Power Systems and Electrical Drives

https://orcid.org/0000-0003-0364-2028 (unauthenticated)

Paweł Prajzendanc

pawel.prajzendanc@gmail.com

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Power Systems and Electrical Drives

http://orcid.org/0000-0002-1662-4390 (unauthenticated)

Marcin Wardach

marcin.wardach@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering/ Department of Power Systems and Electrical Drives

https://orcid.org/0000-0002-1017-9054 (unauthenticated)

Abstract

The paper presents a design of an axial-flux surface-mounted permanent-magnet generator with flux-regulation capability. Based on three-dimensional finite-element analysis (3D-FEA), the no-load air-gap magnetic flux density, flux-control characteristics, cogging torque and electromagnetic torque of the machine have been predicted. Simulation results of no-load back-EMF waveforms performed at different DC control coil excitations have been compared with experimental results.

Keywords:

axial-flux machine, PM generator, hybrid excitation, flux-control, voltage regulation

References

Afinowi I. A. A., et al.: Hybrid-Excited Doubly Salient Synchronous Machine With Permanent Magnets Between Adjacent Salient Stator Poles. IEEE Transactions on Magnetics 51(10), 2015, 8107909, 1–9 [https://doi.org/10.1109/TMAG.2015.2446951].

Aydin E., et al.: A hybrid-excited axial transverse flux permanent magnet generator. IEEE Energy Conversion Congress and Exposition (ECCE) –Milwaukee, 2016, 1–6 [https://doi.org/10.1109/ECCE.2016.7854701].

Aydin M., Surong H., Lipo T.A.: Design, Analysis, and Control of a Hybrid Field-Controlled Axial-Flux Permanent-Magnet Motor. IEEE Transactions on Industrial Electronics 57(1), 2010, 78–87 [https://doi.org/10.1109/TIE.2009.2028294].

Di Barba P., et al.: Hybrid excited synchronous machine with flux control possibility. International Journal of Applied Electromagnetics and Mechanics 52(3-4), 2016, 1615–1622 [https://doi.org/10.3233/JAE-162190].

Dupas A., et al.: Investigation of a New Topology of Hybrid-Excited Flux-Switching Machine With Static Global Winding: Experiments and Modeling. IEEE Transactions on Industry Applications 52(2), 2016, 1413–1421 [https://doi.org/10.1109/TIA.2015.2497305].

Hua H., Zhu Z. Q., Zhan H.: Novel Consequent-Pole Hybrid Excited Machine With Separated Excitation Stator. IEEE Transactions on Industrial Electronics 63(8), 2016, 4718–4728 [https://doi.org/10.1109/TIE.2016.2559447].

Lee C. H. T., Liu C., Chau K. T.: A magnetless axial-flux machine for range-extended electric vehicle. Energies 7(3), 2014, 1483–1499, https://doi.org/10.3390/en7031483].

Paplicki P., Prajzendanc P.: The Influence of Permanent Magnet Length and Magnet Type on Flux-control of Axial Flux Hybrid Excited Electrical Machine. 14th Selected Issues of Electrical Engineering and Electronics (WZEE), 2018 [https://doi.org/10.1109/WZEE.2018.8749015].

Paplicki P.: A novel rotor design for a hybrid excited synchronous machine, Archives of Electrical Engineering 66(1), 2017, 29–40 [https://doi.org/10.1515/aee-2017-0003].

Paplicki P.: Modified concept of axial-flux permanent magnet machine with field weakening capability. Archives of Electrical Engineering 63(2), 2014, 177–185 [https://doi.org/10.2478/aee-2014-0014].

Tapia, J. A., Leonardi, F., Lipo, T. A.: Consequent-Pole Permanent-Magnet Machine with Extended Field-Weakening Capability. IEEE Transactions on Industry Applications 39(6), 2003, 1704–1709 [https://doi.org/10.1109/TIA.2003.818993].

Wang Q., Niu S., Luo X.: A Novel Hybrid Dual-PM Machine Excited by AC With DC Bias for Electric Vehicle Propulsion. IEEE Transactions on Industrial Electronics 64(9), 2017, 6908–6919 [https://doi.org/10.1109/TIE.2017.2682778].

Wardach M., et al.: Novel Hybrid Excited Machine with Flux Barriers in Rotor Structure. COMPEL – The international journal for computation and mathematics in electrical and electronic engineering 37(4), 2018, 1489–1499 [https://doi.org/10.1108/COMPEL-08-2017-0364].

Wardach M., Paplicki P., Palka R.: A hybrid Excited Machine with Flux Barriers and Magnetic Bridges. Energies 11, 2018, 676 [https://doi.org/10.3390/en11030676].

Zepp L. P., Medlin J. W.: Brushless permanent magnet motor or alternator with variable axial rotor/stator alignment to increase speed capability. US 6555941 B1, 2003.

AN ELECTRICALLY-CONTROLLED AXIAL-FLUX PERMANENT MAGNET GENERATOR. (2020). Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 10(4), 65-68. https://doi.org/10.35784/iapgos.2361

Article Sidebar

Issue Vol. 10 No. 4 (2020)

Archives

Main Article Content

Authors

Abstract

Keywords:

References

Article Details

License