This paper describes a technical solution for emulsion homogeneity monitoring. It consists of turbidity sensors mounted in existing emulsion storage tanks, an electronic module, and corresponding measuring instruments. An experimental setup was developed to test the metrological characteristics of the turbidity sensors using standard kaolin suspension samples. Experiments have shown that turbidity sensors have an extensive measuring range, high sensitivity, and a close-to-linear transfer function. Using turbidity sensors allows for monitoring the stages of emulsion breakdown, such as sedimentation, coalescence, and complete separation into two liquids. Detecting the moment of emulsion breakdown in real-time makes it possible to apply three different modes to restore emulsion homogeneity by repeated mixing at different time intervals. An automated system for monitoring emulsion homogeneity, consisting of turbidity sensors, an electronic module, and a programmable logic controller, is proposed. Monitoring the emulsion destabilization process in real time makes it possible to use three different modes to restore its homogeneity by repeated mixing at different time intervals. This provides a significant reduction in the time to restore the homogeneity of the water-fuel emulsion. The proposed system can be integrated into most existing installations for the production and storage of water-fuel emulsions.
References
[1] Abdul Wahhab, H. A., Maskour, M. A., & Madodi, S. A. (2020). Investigation of Water-Diesel Emulsion Characteristics using Optical Technique. Journal of Applied Fluid Mechanics, 13(1), 349–355. https://doi.org/10.29252/jafm.13.01.30133
[2] Akbari, S., & Nour, A. H. (2018). Emulsion types, stability mechanisms and rheology: A review. International Journal of Innovative Research and Scientific Studies, 1(1), 11–17. https://doi.org/10.53894/ijirss.v1i1.4
[3] Alvarado, V., Wang, X., & Moradi, M. (2011). Stability Proxies for Water-in-Oil Emulsions and Implications in Aqueous-based Enhanced Oil Recovery. Energies, 4(7), 1058–1086. https://doi.org/10.3390/en4071058
[4] Avulapati, M. M., Megaritis, T., Xia, J., & Ganippa, L. (2019). Experimental understanding on the dynamics of micro-explosion and puffing in ternary emulsion droplets. Fuel, 239, 1284–1292. https://doi.org/10.1016/j.fuel.2018.11.112
[5] Costa, C., Medronho, B., Filipe, A., Mira, I., Lindman, B., Edlund, H., & Norgren, M. (2019). Emulsion Formation and Stabilization
by Biomolecules: The Leading Role of Cellulose. Polymers, 11(10), 1570. https://doi.org/10.3390/polym11101570
[6] Isoyama, R., Taie, M., Kageyama, T., Miura, M., Maeda, A., Mori, A., & Lee, S.-S. (2017). A Feasibility Study on the Simultaneous Sensing of Turbidity and Chlorophyll a Concentration Using a Simple Optical Measurement Method. Micromachines, 8(4), 112. https://doi.org/10.3390/mi8040112
[7] Kornienko, V. S., Radchenko, R. M., Mikielewicz, D., Konovalov, D. V., & Andreev, A. A. (2020). Reducing the harmful emissions and porous pollutions while combustion of water-fuel emulsions. Journal of New Technologies in Environmental Science, (2), 90–97.
[8] Liu, C., Chen, H., Xu, J., Xu, J., Cui, L., Cen, L., Cao, F., & Xiao, T. (2022). A model for evaluating the micro-explosion of a single droplet
of water-in-oil emulsions and the effect of hydrophilic surfactants on the phenomenon. Chemical Engineering Science, 262, 118047. https://doi.org/10.1016/j.ces.2022.118047
[9] Nguyen, H. H., Nguyen, D. C., & Nguyen, T. L. (2024). Efficiency Evaluation of Using Water-Fuel Emulsion as Fuel for Automobiles. Journal of Science and Transport Technology, 1–12. https://doi.org/10.58845/jstt.utt.2024.en.4.1.1-12
[10] Niszczota, P., Chmielewski, M., & Gieras, M. (2022). Fuel-Water Emulsion as an Alternative Fuel for Gas Turbines in the Context
of Combustion Process Properties – A Review. Energies, 15(23), 8979. https://doi.org/10.3390/en15238979
[11] Parra, L., Rocher, J., Escrivá, J., & Lloret, J. (2018). Design and development of low cost smart turbidity sensor for water quality
monitoring in fish farms. Aquacultural Engineering, 81, 10–18. https://doi.org/10.1016/j.aquaeng.2018.01.004
[12] Patil, H., Gadhave, A., Mane, S., & Waghmare, J. (2015). Analyzing the Stability of the Water-in-Diesel Fuel Emulsion. Journal
of Dispersion Science and Technology, 36(9), 1221–1227. https://doi.org/10.1080/01932691.2014.962039
[13] Salih, S. Y. (2017). Water-Diesel Emulsion: A Review. International Journal of Advances in Engineering & Technology, 10(3), 429–436.
[14] Samoilenko, D., Savchenko, A., & Kravchenko, S. (2023). Improving the performance of diesel engines fueled with water-fuel emulsion. Combustion Engines. https://doi.org/10.19206/CE-169139
[15] Singh, G., Lopes, E., Hentges, N., & Ratner, A. (2019). Experimental Investigation of Water Emulsion Fuel Stability. Volume 7: Fluids Engineering, V007T08A034. https://doi.org/10.1115/IMECE2019-10258
[16] Trevathan, J., Read, W., & Schmidtke, S. (2020). Towards the Development of an Affordable and Practical Light Attenuation Turbidity Sensor for Remote Near Real-Time Aquatic Monitoring. Sensors, 20(7), 1993. https://doi.org/10.3390/s20071993
[17] Woo, S., Kim, W., Lee, J., & Lee, K. (2021). Fuel properties of water emulsion fuel prepared using porous membrane method for low pollutant engine at various temperatures. Energy Reports, 7, 6638–6650. https://doi.org/10.1016/j.egyr.2021.09.082
[18] Zabolotnyi, O., Zabolotnyi, V., & Koshevoy, N. (2022). Capacitive Water-Cut Meter with Robust Near-Linear Transfer Function. Computation, 10(7), 115. https://doi.org/10.3390/computation10070115
[19] Zabolotnyj, A. V., & Koshevoj, N. D. (2004). Development, examination and optimization of the device for quality control of dielectric materials. Pribory i Sistemy Upravleniya, (1), 39–43.
[20] TS-300B High Quality Arduino Turbidity Sensor. https://www.innovatorsguru.com/ts-300b-arduinoturbidity-sensor