Engineering properties of self-compacting concrete incorporating  PET fibres and recycled fine concrete aggregates

Beton jest obecnie najczęściej używanym materiałem w sektorze budowlanym ze względu na jego korzystne właściwości. Jednakże rozprzestrzenianie się odpadów stanowi znaczący problem środowiskowy. Przez ostatnie trzy dekady badacze zgłębiali wykorzystanie odpadów budowlanych i rozbiórkowych (OBR) oraz odpadów plastikowych jako kruszywa, spoiwa i włókien w materiałach budowlanych. Podejście to wyłoniło się jako znaczące rozwiązanie, które ma sprostać wyzwaniom środowiskowym i ekonomicznym. Celem tego badania jest ocena wpływu włókien z politereftalanu etylenu (PETF) na zachowanie betonu samozagęszczalnego (SCC) z recyklingowym, drobnym kruszywem betonowym (RDKB). Naturalne, drobne kruszywa (NDK) były stosowane jako substytut RDKB w różnych udziałach masowych (0–100%). Dodatkowo, dodano cztery frakcje objętościowe (Vf) włókien PETF (w zakresie od 0,3% do 1,2%), a wyniki ujawniły poprawę wytrzymałości na zginanie i modułu sprężystości otrzymanego materiału kompozytowego. Jednakże w miarę wzrostu Vf zawartości włókien PET i RDKB, wytrzymałość na ściskanie spadała, negatywnie wpływając na absorpcję wody przez zanurzenie i absorpcję wody kapilarnej. Użycie 100% RDKB i 1,2% PETF poprawiło moduł sprężystości i wytrzymałość na zginanie recyklingowego betonu samozagęszczalnego (RSCC) odpowiednio o do 25% i 9%.

Słowa kluczowe:

włókna z politereftalanu etylenu, recyklingowe drobne kruszywo betonowe, wytrzymałość na zginanie, beton samozagęszczalny

Bibliografia

H. Lv, Y. Li, H. Bin Yan, D. Wu, G. Shi, and Q. Xu, “Examining construction waste management policies in mainland China for potential performance improvements,” Clean Technol. Environ. Policy, vol. 23, no. 2, pp. 445–462, 2021. https://doi.org/10.1007/s10098-020-01984-y

L. W. Zhang, A. O. Sojobi, V. K. R. Kodur, and K. M. Liew, “Effective utilization and recycling of mixed recycled aggregates for a greener environment,” J. Clean. Prod., 2019. https://doi.org/10.1016/j.jclepro.2019.07.075

M. U. Hossain, C. S. Poon, I. M. C. Lo, and J. C. P. Cheng, “Comparative environmental evaluation of aggregate production from recycled waste materials and virgin sources by LCA,” Resour. Conserv. Recycl., vol. 109, pp. 67–77, 2016. https://doi.org/10.1016/j.resconrec.2016.02.009

L. W. Zhang, A. O. Sojobi, and K. M. Liew, “Sustainable CFRP-reinforced recycled concrete for cleaner eco-friendly construction,” J. Clean. Prod., vol. 233, pp. 56–75, 2019. https://doi.org/10.1016/j.jclepro.2019.06.025

A. Ait Mohamed Amer, K. Ezziane, and M. H. Adjoudj, “Evaluation of coarse recycled concrete aggregates effect on the properties of fresh and hardened concrete,” Asian J. Civ. Eng., vol. 22, no. 6, pp. 1173–1184, 2021. https://doi.org/10.1007/s42107-021-00373-0

Y. Toumi, S. Mezhoud, O. Boukendakdji, and H. Moussa, “Impact of recycled aggregate brick on the physical-mechanical and environmental characteristics of cement treated bases Impact of recycled aggregate brick on the physical-mechanical and environmental characteristics of cement treated bases,” no. September, 2023. https://doi.org/10.35784/bud-arch.3645

K. Kapoor, S. P. Singh, B. Singh, and P. Singh, “Effect of recycled aggregates on fresh and hardened properties of self compacting concrete,” Mater. Today Proc., vol. 32, no. xxxx, pp. 600–607, 2020. https://doi.org/10.1016/j.matpr.2020.02.753

E. Güneyisi, M. Gesoglu, Z. Algin, and H. Yazici, “Rheological and fresh properties of self-compacting concretes containing coarse and fine recycled concrete aggregates,” Constr. Build. Mater., vol. 113, pp. 622–630, 2016. https://doi.org/10.1016/j.conbuildmat.2016.03.073

M. U. Usmani and A. S. M. A. Awal, “Physical, mechanical and durable characteristics of concrete incorporating polyethylene terephthalate fiber from bottle waste,” J. Crit. Rev., vol. 7, no. 5, pp. 908–916, 2020. https://doi.org/10.31838/jcr.07.05.187

L. Evangelista and J. de Brito, “Durability performance of concrete made with fine recycled concrete aggregates,” Cem. Concr. Compos., vol. 32, no. 1, pp. 9–14, 2010. https://doi.org/10.1016/j.cemconcomp.2009.09.005

D. Nieto, E. Dapena, P. Alaejos, J. Olmedo, and D. Pérez, “Properties of Self-Compacting Concrete Prepared with Coarse Recycled Concrete Aggregates and Different Water:Cement Ratios,” J. Mater. Civ. Eng., vol. 31, no. 2, p. 04018376, 2019. https://doi.org/10.1061/(asce)mt.1943-5533.0002566

M. Pająk, “Research on the recycled and hybrid fibre reinforced self-compacting concrete under flexure,” Bud. i Archit., vol. 19, no. 3, pp. 116–126, 2020. https://doi.org/10.35784/bud-arch.2150

J. A. Carneiro, P. R. L. Lima, M. B. Leite, and R. D. Toledo Filho, “Compressive stress-strain behavior of steel fiber reinforced-recycled aggregate concrete,” Cem. Concr. Compos., vol. 46, pp. 65–72, 2014. https://doi.org/10.1016/j.cemconcomp.2013.11.006

A. H. Allawi, A. I. Al-hadithi, and A. S. Mohmoud, “Iraqi Journal of Civil Engineering Effects of Waste Plastic PET Fibers on The Fresh and Hardened of Normal Concrete,” 2021.

I. Zemir, F. Debieb, S. Kenai, Y. Ouldkhaoua, and I. Irki, “Strengthening of ordinary vibrated concrete using steel fibers self-compacting concrete,” J. Adhes. Sci. Technol., vol. 34, no. 14, pp. 1556–1571, 2020. https://doi.org/10.1080/01694243.2020.1712769

A. I. Al-hadithi, A. Tareq, and W. Khairi, “Mechanical properties and impact behavior of PET fi ber reinforced self- compacting concrete ( SCC ),” Compos. Struct., vol. 224, no. May, p. 111021, 2019. https://doi.org/10.1016/j.compstruct.2019.111021

N. K. Bui, T. Satomi, and H. Takahashi, “Recycling woven plastic sack waste and PET bottle waste as fiber in recycled aggregate concrete: An experimental study,” Waste Manag., vol. 78, pp. 79–93, 2018. https://doi.org/10.1016/j.wasman.2018.05.035

M. Hajmohammadian Baghba, S. A. H. Hashemi, K. Kalbasi Anaraki, and E. S. Hashemi, “Influence of polypropylene-fiber on the mechanical properties of self-compacting-concrete with recycled aggregates,” Mag. Civ. Eng., vol. 99, no. 7, 2020. https://doi.org/10.18720/MCE.99.5

C. Dong et al., “Fresh and hardened properties of recycled plastic fiber reinforced self-compacting concrete made with recycled concrete aggregate and fly ash, slag, silica fume,” J. Build. Eng., vol. 62, no. September, p. 105384, 2022. https://doi.org/10.1016/j.jobe.2022.105384

A. Toghroli, P. Mehrabi, M. Shariati, N. T. Trung, S. Jahandari, and H. Rasekh, “Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers,” Constr. Build. Mater., vol. 252, 2020. https://doi.org/10.1016/j.conbuildmat.2020.118997

P. and U. EFNARC The European Guidelines for Self-Compacting Concrete: Specification, “The European Guidelines for Self-Compacting Concrete: Specification, Production and Use,” Eur. Guidel. Self Compact. Concr., no. May, p. 68, 2005.

BS EN 12350-8:2010, “BSI Standards Publication Testing fresh concrete,” Br. Stand., no. April, p. 18, 2010.

N. F. EN, “12350–10, Novembre 2010,” Partie Bét. autoplaçant–essai à la boite en L.

2010 BS EN12350-11:, “BSI Standards Publication Testing fresh concrete Part 11: Self-compacting concrete -- sieve Segregation test,” BSI Stand. Publ., 2010.

B. S. I. BSI, “12390-3 Testing hardened concrete Compressive strength of test specimens,” Aberdeen’s Concr. Constr., vol. 38, no. 10, 1993.

ASTM C469/C469M, “Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression,” ASTM Stand. B., pp. 1–5, 2014. https://doi.org/10.1520/C0469

British Standards Institute, “BS EN 12390-5:2009 Testing hardened concrete — Part 5: Flexural strength of test specimens,” BSI Stand. Publ., no. August, pp. 1–22, 2009.

“BS 1881-122_2011 Testing concrete.”

“ASTM C1585_Measurement of Rate of Absorption of Water by HydraulicCement Concretes.”

D. Carro-López, B. González-Fonteboa, J. De Brito, F. Martínez-Abella, I. González-Taboada, and P. Silva, “Study of the rheology of self-compacting concrete with fine recycled concrete aggregates,” Constr. Build. Mater., vol. 96, pp. 491–501, 2015. https://doi.org/10.1016/j.conbuildmat.2015.08.091

P. Kruger, P. Serbai, A. S. A. Chinelatto, and E. Pereira, “Influence of particle size distribution of conventional fine aggregate and construction demolition waste aggregate in Portland cement mortar,” Ceramica, vol. 67, no. 383, pp. 269–276, 2021. https://doi.org/10.1590/0366-69132021673833035

A. I. Al-Hadithi and N. N. Hilal, “The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers,” J. Build. Eng., vol. 8, pp. 20–28, 2016. https://doi.org/10.1016/j.jobe.2016.06.011

N. Bahrami, M. Zohrabi, S. A. Mahmoudy, and M. Akbari, “Optimum recycled concrete aggregate and micro-silica content in self-compacting concrete: Rheological, mechanical and microstructural properties,” J. Build. Eng., vol. 31, no. February, p. 101361, 2020. https://doi.org/10.1016/j.jobe.2020.101361

S. Shahidan, N. A. Ranle, S. S. M. Zuki, F. S. Khalid, A. R. M. Ridzuan, and F. M. Nazri, “Concrete incorporated with optimum percentages of recycled polyethylene terephthalate (PET) bottle fiber,” Int. J. Integr. Eng., vol. 10, no. 1, pp. 1–8, 2018. https://doi.org/10.30880/ijie.2018.10.01.001

M. Oghabi and M. Khoshvatan, “The Laboratory Experiment of the Effect of Quantity and Length of Plastic Fiber on Compressive Strength and Tensile Resistance of Self-Compacting Concrete,” KSCE J. Civ. Eng., vol. 24, no. 8, pp. 2477–2484, 2020. https://doi.org/10.1007/s12205-020-1578-9.

A. G. Khoshkenari, P. Shafigh, M. Moghimi, and H. Bin Mahmud, “The role of 0-2mm fine recycled concrete aggregate on the compressive and splitting tensile strengths of recycled concrete aggregate concrete,” Mater. Des., vol. 64, pp. 345–354, 2014. https://doi.org/10.1016/j.matdes.2014.07.048

O. Gencel, W. Brostow, T. Datashvili, and M. Thedford, “Workability and mechanical performance of steel fiber-reinforced self-compacting concrete with fly ash,” Compos. Interfaces, vol. 18, no. 2, pp. 169–184, 2011. https://doi.org/10.1163/092764411X567567

M. Ahmadi, S. Farzin, A. Hassani, and M. Motamedi, “Mechanical properties of the concrete containing recycled fibers and aggregates,” Constr. Build. Mater., vol. 144, pp. 392–398, 2017. https://doi.org/10.1016/j.conbuildmat.2017.03.215

T. Ochi, S. Okubo, and K. Fukui, “Development of recycled PET fiber and its application as concrete-reinforcing fiber,” Cem. Concr. Compos., vol. 29, no. 6, pp. 448–455, 2007. https://doi.org/10.1016/j.cemconcomp.2007.02.002

M. Behera, A. K. Minocha, and S. K. Bhattacharyya, “Flow behavior, microstructure, strength and shrinkage properties of self-compacting concrete incorporating recycled fine aggregate,” Constr. Build. Mater., vol. 228, p. 116819, 2019, https://www.doi.org/10.1016/j.conbuildmat.2019.116819

D. Pedro, J. de Brito, and L. Evangelista, “Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: Mechanical, durability and long-term properties,” Constr. Build. Mater., vol. 154, pp. 294–309, 2017. https://doi.org/10.1016/j.conbuildmat.2017.07.215

E. Ghorbel and G. Wardeh, “Influence of recycled coarse aggregates incorporation on the fracture properties of concrete,” Constr. Build. Mater., vol. 154, pp. 51–60, 2017. https://doi.org/10.1016/j.conbuildmat.2017.07.183

J. Nam et al., “Effectiveness of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete,” Materials (Basel)., vol. 9, no. 3, 2016. https://doi.org/10.3390/ma9030131

M. Koushkbaghi, M. J. Kazemi, H. Mosavi, and E. Mohseni, “Acid resistance and durability properties of steel fiber-reinforced concrete incorporating rice husk ash and recycled aggregate,” Constr. Build. Mater., vol. 202, pp. 266–275, 2019. https://doi.org/10.1016/j.conbuildmat.2018.12.224

A. I. Al-hadithi and W. K. M. Frhaan, “The Effects of Adding Waste Plastic Fibers (WPFs) on Some Properties of Self Compacting Concrete using Iraqi local Materials,” Iraqi J. Civ. Eng., vol. 11, no. 1, pp. 1–20, 2017.

„Właściwości inżynieryjne betonu samozagęszczalnego z dodatkiem włókien PET i recyklingowego drobnego kruszywa betonowego” (2024) Budownictwo i Architektura / Civil and Architectural Engineering, 22(4), s. 071–095. doi:10.35784/bud-arch.5491.

##plugins.themes.bootstrap3.article.sidebar##

Numer Tom 22 Nr 4 (2023)

Archiwum

##plugins.themes.bootstrap3.article.main##

Authors

Abstrakt

Słowa kluczowe:

Bibliografia

##plugins.themes.bootstrap3.article.details##

Licencja