POSSIBILITIES OF RENOVATION FUNCTIONAL SURFACES OF EQUIPMENTS IN THE MECHANICAL ENGINEERING INDUSTRY
Janette BREZINOVÁ
janette.brezinova@tuke.skTechnical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice (Slovakia)
Ján VIŇÁŠ
Technical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice (Slovakia)
Dagmar DRAGANOVSKÁ
Technical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice (Slovakia)
Anna GUZANOVÁ
Technical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice (Slovakia)
Jakub BREZINA
Technical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice (Slovakia)
Abstract
The paper analyzes the possibilities of increasing the lifespan of rollers in continuous steel casting line. There are analyzed the causes of the surface rollers damage and the impact of degrading factors in metallurgical production. Three types of welding consumable electrodes designed for restoration layers formation applied by SAW surfacing technology were analyzed. There were analyzed microstructure, microhardness and properties of weld clads in tribological conditions.
Keywords:
renovation, continuous casting line, rollers, SAW, wearReferences
Blaškovitš, P., & Čomaj, M. (2006). Renovation by welding and thermal spraying. Bratislava: STU.
Google Scholar
Brezinová, J., Viňáš, J., Maruschak, P. O., Guzanová, A., Draganovská, D., & Vrabeľ, M. (2017). Sustainable renovation within metallurgical production. Lüdenscheid: Verlag.
Google Scholar
Houldcroft, P. T. (2014). Submerged-Arc Welding, Elsevier.
Google Scholar
Kotus, M., Andrássyová, Z., Cico, P., Fries, J., & Hrabe, P. (2011). Analysis of wear resistent weld materials in laboratory conditions. Research in Agricultural Engineering, 57, 74–78.
DOI: https://doi.org/10.17221/56/2010-RAE
Google Scholar
Lekhov, O. S., Mikhalev, A. V., Bilalov, D. K., & Shevelev, M. M. (2017). Cyclic-deformation system for the reduction of continuous-cast slabs. Steel in Translation 4(47), 225–228. https://doi.org/10.3103/S0967091217040064
DOI: https://doi.org/10.3103/S0967091217040064
Google Scholar
Lorincová, D. (2012). Analysis of quality of renovation layers from aspect of degradation phenomena (doctoral dissertation). Technical University of Kosice: Kosice.
Google Scholar
Mikuš, R., Szabó, V., Drlička, R., & Bakajová, J. (2014). Hardness and microstructure analysis of deposit material based on Fe-Cr-Ni. Advanced Materials Research, 1059, 35–42. https://doi.org/10.4028/www.scientific.net/AMR.1059.35
DOI: https://doi.org/10.4028/www.scientific.net/AMR.1059.35
Google Scholar
Nadooshan, A. A., Saeedi, A., Rasooli, M., Izadi, J., & Poursina, M. (2009). Calculation of possibility for parameter design in changing central cooling system to revolver cooling system for continuous casting rollers. World Academy of Science, Engineering and Technology, 49, 252–257.
Google Scholar
Olson, D. L., Dixon, R. D., & Liby, A. L. (2012). Welding: Theory and Practice, Materials Processing: Theory and Practices. Elsevier.
Google Scholar
Pauliček, T., Kotus, M., Daňko, M., & Žúbor, P. (2013). Resistance of hard-facing deposit created by laser surfacing technology. Advanced Materials Research, 801, 117–122. https://doi.org/10.4028/www.scientific.net/AMR.801.117
DOI: https://doi.org/10.4028/www.scientific.net/AMR.801.117
Google Scholar
Toyserkani, E., Khajepour, A., & Corbin, S. F. (2014). Laser Cladding. CRC Press.
Google Scholar
Viňáš, J., Brezinová, J., Guzanová, A., & Lorincová, D. (2011). Properties of renovation layers applied by submerged arc welding. Chemické listy, 105(17), 858–859.
Google Scholar
Viňáš, J., Greš, M., & Vaško, T. (2016). Cladding of wear-resistant layers in metallurgy and engineering. Materials Science Forum, 862, 41–48.
DOI: https://doi.org/10.4028/www.scientific.net/MSF.862.41
Google Scholar
Viňáš, J., Brezinová, J., Guzanová, A., & Svetlík, J. (2013). Degradation of renovation layers deposited on continuous steel casting rollers by submerged arc welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(12), 1841–1848.
DOI: https://doi.org/10.1177/0954405413493405
Google Scholar
Wu, Y., Xiang, Q., He, Y., Chen, H., Hu, B. (2015). Main technical route of renovation heattreatment of aero-engine turbine blades. Jinshu Rechuli/Heat Treatment of Metals, 11(40), 176–178.
Google Scholar
Authors
Janette BREZINOVÁjanette.brezinova@tuke.sk
Technical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice Slovakia
Authors
Ján VIŇÁŠTechnical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice Slovakia
Authors
Dagmar DRAGANOVSKÁTechnical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice Slovakia
Authors
Anna GUZANOVÁTechnical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice Slovakia
Authors
Jakub BREZINATechnical University of Košice, Faculty of Mechanical Engineering, Masiarska 74, 040 01 Košice Slovakia
Statistics
Abstract views: 72PDF downloads: 49
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Wafaa Mustafa HAMEED, Asan Baker KANBAR, USING GA FOR EVOLVING WEIGHTS IN NEURAL NETWORKS , Applied Computer Science: Vol. 15 No. 3 (2019)
- Jarosław ZUBRZYCKI, Antoni ŚWIĆ, Łukasz SOBASZEK, Juraj KOVAC, Ruzena KRALIKOVA, Robert JENCIK, Natalia SMIDOVA, Polyxeni ARAPI, Peter DULENCIN, Jozef HOMZA, CYBER-PHYSICAL SYSTEMS TECHNOLOGIES AS A KEY FACTOR IN THE PROCESS OF INDUSTRY 4.0 AND SMART MANUFACTURING DEVELOPMENT , Applied Computer Science: Vol. 17 No. 4 (2021)
You may also start an advanced similarity search for this article.
