A SIMULATION EXPERIMENT AND MULTI-CRITERIA ASSESSMENT OF MANUFACTURING PROCESS FLOW VARIANTS TESTED ON A COMPUTER MODEL
Sławomir KUKLA
skukla@ath.bielsko.plDepartment of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała (Poland)
Marek SMETANA
Department of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, (Czechia)
Abstract
The article presents issues relating to designing and improvement of manufacturing processes based on a modelling and simulation method. The 3D model of a production line has been designed and simulation experiment, conducted on the Arena model prepared in a versatile package for modelling and simulation of manufacturing systems and representing functioning of the system, has been carried out. The results obtained from the experiment and analyses of time and ergonomics of work at a work station were subject to multi-criteria assessment based on a point-by-point method of assessment according to Yager.
Keywords:
computer model, simulation experiment, multi-criteria assessmentReferences
Dennis, P. (2016). Lean Production simplified. Boca Raton: CRC Press Taylor &Francis Group.
Google Scholar
Dima, I., Man, M. (2015). Modelling and simulation in management. Switzerland: Springer International Publishing.
DOI: https://doi.org/10.1007/978-3-319-16592-9
Google Scholar
Falzon, P. (2015). Constructive ergonomics. Boca Raton: CRC Press.
DOI: https://doi.org/10.1201/b17456
Google Scholar
Kelton, W. D., Sadowski, R. P., & Sturrock, D. T. (2007). Simulation with ARENA. New York: McGraw-Hill Inc.
Google Scholar
Kłos, S., Patalas-Maliszewska, J., & Trebuna, P. (2016). Improving manufacturing processes using simulation methods. Applied Computer Science, 12(4), 7–17.
Google Scholar
Kukla, S. (2014). Multi-criterion assessment of different variants of casts manufacturing processes. Archives of Foundry Engineering, 14(3), 47–50.
DOI: https://doi.org/10.2478/afe-2014-0060
Google Scholar
Kukla, S. (2016). Quality and safety assurance of iron casts and manufacturing processes. Archives of Foundry Engineering, 16(2), 17–20.
DOI: https://doi.org/10.1515/afe-2016-0019
Google Scholar
Maciąg, A., Piertroń, R., & Kukla, S. (2013). Prognozowanie i symulacja w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Manas, J. (2015). The resource management and capacity planning handbook. USA: McGraw-Hill Companies.
Google Scholar
Pisz, I., Sęk, T., & Zielecki, W. (2013). Logistyka w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Plinta, D. (2015). Modelowanie i symulacja procesów produkcyjnych. Bielsko-Biała: Wydawnictwo Naukowe Akademii Techniczno-Humanistycznej.
Google Scholar
Rainey, L. B., Tolk, A. (2015). Modeling and simulation support for system of systems engineering applications. New Jersey: John Wiley & Sons.
DOI: https://doi.org/10.1002/9781118501757
Google Scholar
Rossetti, M. D. (2016). Simulation modelling and Arena. New Jersey: John Wiley& Sons.
Google Scholar
Sobaszek, Ł., & Gola, A. (2015). Computer-aided production task scheduling. Applied Computer Science, 11(4), 58–69.
Google Scholar
Authors
Sławomir KUKLAskukla@ath.bielsko.pl
Department of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Marek SMETANADepartment of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, Czechia
Statistics
Abstract views: 109PDF downloads: 3
License
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Denis Ratov, INTEGRATION WITH THE SOFTWARE INTERFACE OF THE COM SERVER FOR AUTHORIZED USER , Applied Computer Science: Vol. 17 No. 2 (2021)
- Ihor PYSMENNYI, Anatolii PETRENKO, Roman KYSLYI, GRAPH-BASED FOG COMPUTING NETWORK MODEL , Applied Computer Science: Vol. 16 No. 4 (2020)
- Md. Torikur RAHMAN, Mohammad ALAUDDIN, Uttam Kumar DEY, Dr. A.H.M. Saifullah SADI, ADAPTIVE SECURE AND EFFICIENT ROUTING PROTOCOL FOR ENHANCE THE PERFORMANCE OF MOBILE AD HOC NETWORK , Applied Computer Science: Vol. 19 No. 3 (2023)
- Mateusz Sawa, Mirosław Szala, Weronika Henzler, INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY , Applied Computer Science: Vol. 17 No. 3 (2021)
- Moon-gee CHOI, USE OF SERIOUS GAMES FOR THE ASSESSMENT OF MILD COGNITIVE IMPAIRMENT IN THE ELDERLY , Applied Computer Science: Vol. 18 No. 2 (2022)
- Md. Torikur RAHMAN, A NOVEL APPROACH TO ENHANCE THE PERFORMANCE OF MOBILE AD HOC NETWORK (MANET) THROUGH A NEW BANDWIDTH OPTIMIZATION TECHNIQUE , Applied Computer Science: Vol. 15 No. 2 (2019)
- Irena NOWOTYŃSKA, Stanisław KUT, COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION , Applied Computer Science: Vol. 14 No. 4 (2018)
- Marian JANCZAREK, COMPUTER MODELLING OF THERMAL TECHNICAL SPACESS IN ASPECT OF HEAT TRANSFER THROUGH THE WALLS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Paweł MAGRYTA, AERODYNAMIC RESEARCH OF THE OVERPRESSURE DEVICE FOR INDIVIDUAL TRANSPORT , Applied Computer Science: Vol. 13 No. 1 (2017)
- Noor SABAH, Ekhlas HAMEED, Muayed S AL-HUSEINY, OPTIMAL SLIDING MODE CONTROLLER DESIGN BASED ON WHALE OPTIMIZATION ALGORITHM FOR LOWER LIMB REHABILITATION ROBOT , Applied Computer Science: Vol. 17 No. 3 (2021)
<< < 6 7 8 9 10 11 12 13 14 15 > >>
You may also start an advanced similarity search for this article.