NEW EXTRUSION PROCESS FOR PRODUCING TWIST DRILLS USING SPLIT DIES
Tomasz BULZAK
t.bulzak@pollub.plLublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin (Poland)
Zbigniew PATER
Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin (Poland)
Janusz TOMCZAK
Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin (Poland)
Abstract
The paper presents a new extrusion process for producing twist drills using split dies. The design of the dies is described, where the profile of the flute-forming element is the same as the profile of the flute on the plane inclined to the drill axis at an angle equal to the helix angle. The proposed method for the extrusion of twist drills by the new type of dies is verified by numerical modeling. Three cases of the extrusion process are modelled, each with a different position of the flute-forming element relative to the axis of the drill. The paper investigates the effect of the position of the flute-forming element on the angle of inclination of the flutes and the cross-section shape of the drill. Numerical modeling is performed using DEFORM-3D.
Keywords:
extrusion, twist drill, FEM, experimentReferences
Bulzak, T., & Pater, Z. (2013). Numerical analysis of the extrusion process of twist drills. Acta Metallurgica Slovaca, 19, 132–140. https://doi.org/10.12776/ams.v19i2.97
DOI: https://doi.org/10.12776/ams.v19i2.97
Google Scholar
Bulzak, T., Tomczak, J., & Pater, Z. (2016). Wpływ parametrów matrycy na geometrię wyciskanych wierteł krętych. Hutnik – Wiadomości Hutnicze, 83, 390-392. https://doi.org/10.15199/24.2016.9.3
DOI: https://doi.org/10.15199/24.2016.9.3
Google Scholar
Bulzak, T., Tomczak, J.,& Pater, Z. (2014). Method for producing twist drills by extrusion using a three-slide forging press. Key Engineering Materials, 622–623, 129–135. https://doi.org/10.4028/www.scientific.net/KEM.622-623.129
DOI: https://doi.org/10.4028/www.scientific.net/KEM.622-623.129
Google Scholar
Cristobal, M., Ramírez, E. I., Ruiz, O., Ortiz, A., & Jacobo, V. H. (2017). Sensitivity analysis on ram speed of a direct extrusion process model using a porthole die through CEL method. The International Journal of Advanced Manufacturing Technology, 90, 45–57. https://doi.org/10.1007/s00170-016-9279-8
DOI: https://doi.org/10.1007/s00170-016-9279-8
Google Scholar
Dong, W. P., & Chen, J. (2008). 3D FEA simulation of 4A11 piston skirt isothermal forging process. Transactions of Nonferrous Metals Society of China, 18, 1196–1200. https://doi.org/10.1016/S1003-6326(08)60204-6
DOI: https://doi.org/10.1016/S1003-6326(08)60204-6
Google Scholar
Fang, G., Zhou, J., & Duszczyk, J. (2009). Extrusion of 7075 aluminium alloy through doublepocket dies to manufacture a complex profile. Journal of Materials Processing Technology, 209, 3050–3059. https://doi.org/10.1016/j.jmatprotec.2008.07.009
DOI: https://doi.org/10.1016/j.jmatprotec.2008.07.009
Google Scholar
Hwang, Y. M., & Chang, C. N. (2014). Hot extrusion of hollow helical tubes of magnesium alloys. Procedia Engineering, 81, 2249–2254. https://doi.org/10.1016/j.proeng.2014.10.316
DOI: https://doi.org/10.1016/j.proeng.2014.10.316
Google Scholar
Jiang, C. P. (2015). The effect of initial grain size on the mechanical properties and deformability of titanium alloy in a direct extrusion process. International Journal of Precision Engineering and Manufacturing, 16, 301–307. https://doi.org/10.1007/s12541-015-0040-2
DOI: https://doi.org/10.1007/s12541-015-0040-2
Google Scholar
Kim, S. Y., Kubota, S., & Yamanaka, M. (2008). Application of CAE in cold forging and heat treatment processes for manufacturing of precision helical gear part. Journal of Materials Processing Technology, 201, 25–31. https://doi.org/10.1016/j.jmatprotec.2007.11.219
DOI: https://doi.org/10.1016/j.jmatprotec.2007.11.219
Google Scholar
Liekmeier, F. (1992). Hot extrusion of twist drill. Umformtechnik, 26, 181.
Google Scholar
Authors
Tomasz BULZAKt.bulzak@pollub.pl
Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin Poland
Authors
Zbigniew PATERLublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin Poland
Authors
Janusz TOMCZAKLublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin Poland
Statistics
Abstract views: 92PDF downloads: 4
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Łukasz WÓJCIK, Zbigniew PATER, LIMITING VALUE OF COCKROFT-LATHAM INTEGRAL FOR COMMERCIAL PLASTICINE , Applied Computer Science: Vol. 13 No. 4 (2017)
Similar Articles
- Krzysztof Michalczyk, Mariusz Warzecha, Robert Baran, A NEW METHOD FOR GENERATING VIRTUAL MODELS OF NONLINEAR HELICAL SPRINGS BASED ON A RIGOROUS MATHEMATICAL MODEL , Applied Computer Science: Vol. 19 No. 2 (2023)
- Edyta ŁUKASIK, Wiktor FLIS, EFFICIENCY COMPARISON OF NETWORKS IN HANDWRITTEN LATIN CHARACTERS RECOGNITION WITH DIACRITICS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Jarosław GIL, Andrzej POLAŃSKI, APPLICATION OF GILLESPIE ALGORITHM FOR SIMULATING EVOLUTION OF FITNESS OF MICROBIAL POPULATION , Applied Computer Science: Vol. 18 No. 4 (2022)
- Kuba ROSŁANIEC, ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE , Applied Computer Science: Vol. 18 No. 1 (2022)
- Kevin Joy DSOUZA, Zahid Ahmed ANSARI, HISTOPATHOLOGY IMAGE CLASSIFICATION USING HYBRID PARALLEL STRUCTURED DEEP-CNN MODELS , Applied Computer Science: Vol. 18 No. 1 (2022)
- Jarosław ZUBRZYCKI, Natalia SMIDOVA, Jakub LITAK, Andrei AUSIYEVICH, NUMERICAL ANALYSIS OF SPINAL LOADS IN SPONDYLOLISTHESIS TREATMENT USING PEDICLE SCREWS – PRELIMINARY RESEARCH , Applied Computer Science: Vol. 13 No. 3 (2017)
- Tomasz CHMIELEWSKI, Katarzyna ZIELIŃSKA, SURVEY OF REMOTELY CONTROLLED LABORATORIES FOR RESEARCH AND EDUCATION , Applied Computer Science: Vol. 13 No. 1 (2017)
- Paweł PIEŚKO, Magdalena ZAWADA-MICHAŁOWSKA, USEFULNESS OF MODAL ANALYSIS FOR EVALUATION OF MILLING PROCESS STABILITY , Applied Computer Science: Vol. 13 No. 1 (2017)
- Yuriy TRYUS, Nataliya ANTIPOVA, Kateryna ZHURAVEL, Grygoriy ZASPA, INFORMATION TECHNOLOGY OF STOCK INDEXES FORECASTING ON THE BASE OF FUZZY NEURAL NETWORKS , Applied Computer Science: Vol. 13 No. 1 (2017)
- Karolina FERYSIUK, Karolina M. WÓJCIAK, Paulina KĘSKA, Dariusz M. STASIAK, INSTRUMENTAL COLOR MEASUREMENT OF MEAT AND MEAT PRODUCTS IN X-RITECOLOR® MASTER , Applied Computer Science: Vol. 16 No. 3 (2020)
You may also start an advanced similarity search for this article.
