NUMERICAL RESULTS QUALITY IN DEPENDENCE ON ABAQUS PLANE STRESS ELEMENTS TYPE IN BIG DISPLACEMENTS COMPRESSION TEST
Bartosz KAWECKI
b.kawecki@pollub.pl* Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin (Poland)
Jerzy PODGÓRSKI
Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, (Poland)
Abstract
The paper presents a brief description of the Abaqus Simulia plane stress quadrilateral elements (CPS4R, CPS4I, CPS4, CPS8R, CPS8). Comparison of the results quality obtained using each of them was done. There was considered two dimensional big displacements compression test for a highly orthotropic material. Simulations were performed for the compression in two perpendicular directions.
Keywords:
Abaqus Finite Elements, Plane Stress, Orthotropic MaterialReferences
Abaqus/CAE V6.14 User's Manual.
Google Scholar
Armstrong, C. G. (1994). Modelling requirements for finite-element analysis. Computer-Aided Design, 26, 573–578. https://doi.org/10.1016/0010-4485(94)90088-4
DOI: https://doi.org/10.1016/0010-4485(94)90088-4
Google Scholar
Barlow, J. (1989). More on optimal stress points – reduced integration, element distortions and error estimation. International Journal of Numerical Methods in Engineering, 28, 1487–1504. https://doi.org/10.1002/nme.1620280703
DOI: https://doi.org/10.1002/nme.1620280703
Google Scholar
Bathe, K. J. (2014). Finite Element Procedures. Second Edition, 341–389.
Google Scholar
Cook, R. D., Malkus, D. S., Plesha, M. E., & Witt R. J. (2002). Concepts and Applications of FEA, 4th ed. (98–102). John Wiley&Sons, Inc.
Google Scholar
Jones, R. M. (1999). Mechanics of Composite Materials. Second Edition, 55–73. Philadelphia: Taylor & Francis Group.
Google Scholar
Lekhnitskii, S. G. (1981). Theory of Elasticity of an Anisotropic Elastic Body. Mir Publishers.
Google Scholar
Lee, N. S., & Bathe, K. J. (1993). Effects of element distortions on the performance of isoparametric elements. International Journal of Numerical Methods in Engineering, 36, 3553–3576. https://doi.org/10.1002/nme.1620362009
DOI: https://doi.org/10.1002/nme.1620362009
Google Scholar
Liu, G. R. & Quek, S. S. (2014). The Finite Element Method. A Practical Course. Second Edition, 161–211. Elsevier.
DOI: https://doi.org/10.1016/B978-0-08-098356-1.00007-2
Google Scholar
Macneal, R. H., & Harder, R. L. (1985). A proposed standard set of problems to test finite element accuracy. Finite Elements in Analysis and Design, 1, 3–20. https://doi.org/10.1016/0168-874X(85)90003-4
DOI: https://doi.org/10.1016/0168-874X(85)90003-4
Google Scholar
Turcke, D. J., & McNeice, G. M. (1974). Guidelines for selecting finite element grids based on an optimization study. Computers & Structures, 4, 499–519. https://doi.org/10.1016/0045-7949(74)90003-0
DOI: https://doi.org/10.1016/0045-7949(74)90003-0
Google Scholar
Zienkiewicz, O. C., & Taylor, R. L. (2000). The Finite Element Method. Fifth Edition. Volume 1: The Basis, 164–198. Oxford, UK: Butterworth-Heinemann.
Google Scholar
Authors
Bartosz KAWECKIb.kawecki@pollub.pl
* Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin Poland
Authors
Jerzy PODGÓRSKILublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, Poland
Statistics
Abstract views: 174PDF downloads: 24
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Damian KRASKA, Tomasz TRZEPIECIŃSKI, FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Kuba ROSŁANIEC, ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE , Applied Computer Science: Vol. 18 No. 1 (2022)
- Katarzyna BARAN, APPLICATION OF THERMAL IMAGING CAMERAS FOR SMARTPHONE: SEEK THERMAL COMPACT PRO AND FLIR ONE PRO FOR HUMAN STRESS DETECTION – COMPARISON AND STUDY , Applied Computer Science: Vol. 20 No. 1 (2024)
- Stanisław BŁAWUCKI, Kazimierz ZALESKI, CONSTRUCTION AND TECHNOLOGICAL ANALYSIS OF THE BROACH BLADE SHAPE USING THE FINITE ELEMENT METHOD , Applied Computer Science: Vol. 13 No. 1 (2017)
- Andrzej ŁUKASZEWICZ, Jerzy JÓZWIK, Kamil CYBUL, IMPACT OF FRICTION COEFFICIENT VARIATION ON TEMPERATURE FIELD IN ROTARY FRICTION WELDING OF METALS – FEM STUDY , Applied Computer Science: Vol. 19 No. 3 (2023)
- Andrij MILENIN, PARALLEL SOLUTION OF THERMOMECHANICAL INVERSE PROBLEMS FOR LASER DIELESS DRAWING OF ULTRA-THIN WIRE , Applied Computer Science: Vol. 18 No. 3 (2022)
- Stanisław SKULIMOWSKI, Jerzy MONTUSIEWICZ, Marcin BADUROWICZ, ENHANCING THE EFFICIENCY OF THE LEVENSHTEIN DISTANCE BASED HEURISTIC METHOD OF ARRANGING 2D APICTORIAL ELEMENTS FOR INDUSTRIAL APPLICATIONS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Konrad BIERCEWICZ, Mariusz BORAWSKI, Anna BORAWSKA, Jarosław DUDA, DETERMINING THE DEGREE OF PLAYER ENGAGEMENT IN A COMPUTER GAME WITH ELEMENTS OF A SOCIAL CAMPAIGN USING COGNITIVE NEUROSCIENCE TECHNIQUES , Applied Computer Science: Vol. 18 No. 4 (2022)
- Dariusz Plinta, Katarzyna Radwan, IMPROVING MATERIAL FLOW IN A MODIFIED PRODUCTION SYSTEM , Applied Computer Science: Vol. 19 No. 1 (2023)
- Pornsiri KHUMLA, Kamthorn SARAWAN, IMPROVING MATERIAL REQUIREMENTS PLANNING THROUGH WEB-BASED: A CASE STUDY THAILAND SMEs , Applied Computer Science: Vol. 19 No. 4 (2023)
You may also start an advanced similarity search for this article.
