CONSTRUCTION OF AN ULTRASONIC TOMOGRAPH FOR ANALYSIS OF TECHNOLOGICAL PROCESSES IN THE FIELD OF REFLECTION AND TRANSMISSION WAVES

Main Article Content

DOI

Tomasz Rymarczyk

tomasz@rymarczyk.com

https://orcid.org/0000-0002-3524-9151
Michał Gołąbek

michal.golabek@netrix.com.pl

https://orcid.org/0000-0002-2696-505X
Piotr Lesiak

piotr.lesiak@wsei.lublin.pl

https://orcid.org/0000-0002-9792-3463
Andrzej Marciniak

andrzej.marciniak@wsei.lublin.pl

https://orcid.org/0000-0002-2718-4802
Mirosław Guzik

miroslaw.guzik@wsei.lublin.pl

https://orcid.org/0000-0003-3351-9039

Abstract

This article presents the ultrasonic structure for the analysis of technological processes in the field of reflective and transmission waves. Ultrasound tomography enables the analysis of processes occurring in the examined object without interfering with its interior through appropriate acquisition and analysis of data. The design goal is to verify the repeatability of measurement results by eliminating laboratory equipment. The ultrasonic tomograph has been designed in a modular way and consists of a motherboard connected to an analog signal conditioning board, a liquid crystal display with an integrated graphics processor and a high voltage pulser with a 64 channel multiplexer. The solution was designed for tomographic measurements of technological process properties.

Keywords:

ultrasound tomography, sensors, measurements

References

Article Details

Rymarczyk, T., Gołąbek, M., Lesiak, P., Marciniak, A., & Guzik, M. (2019). CONSTRUCTION OF AN ULTRASONIC TOMOGRAPH FOR ANALYSIS OF TECHNOLOGICAL PROCESSES IN THE FIELD OF REFLECTION AND TRANSMISSION WAVES. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 9(4), 43–47. https://doi.org/10.35784/iapgos.569