SIMULATION AND EXPERIMENTAL RESEARCH OF CLAW POLE MACHINE WITH A HYBRID EXCITATION AND LAMINATED ROTOR CORE

Marcin Wardach; Paweł Prajzendanc; Kamil Cierzniewski; Michał Cichowicz; Szymon Pacholski; Mikołaj Wiszniewski; Krzysztof Baradziej; Szymon Osipowicz

doi:10.35784/iapgos.2656

PDF

Published: 2021-06-30

DOI: https://doi.org/10.35784/iapgos.2656

Issue Vol. 11 No. 2 (2021)

A STEP TOWARDS THE MAJORITY-BASED CLUSTERING VALIDATION DECISION FUSION METHOD
Taras Panskyi, Volodymyr Mosorov

4-13
FUZZY APPROACH TO DEVICE LOCALIZATION BASED ON WIRELESS NETWORK SIGNAL STRENGTH
Michał Socha, Wojciech Górka, Marcin Michalak

14-21
APPLICATION OF DIGITAL IMAGE PROCESSING METHODS FOR OBTAINING CONTOURS OF OBJECTS ON ULTRASOUND IMAGES OF THE HIP JOINT
Pavlo Ratushnyi, Yosyp Bilynskyi, Stepan Zhyvotivskyi

22-25
OVERVIEW OF THE USE OF X-RAY EQUIPMENT IN ELECTRONICS QUALITY TESTS
Magdalena Michalska

26-29
SIMULATION AND EXPERIMENTAL RESEARCH OF CLAW POLE MACHINE WITH A HYBRID EXCITATION AND LAMINATED ROTOR CORE
Marcin Wardach, Paweł Prajzendanc, Kamil Cierzniewski, Michał Cichowicz, Szymon Pacholski, Mikołaj Wiszniewski, Krzysztof Baradziej, Szymon Osipowicz

30-35
BATTERY SWAPPING STATIONS FOR ELECTRIC VEHICLES
Aleksander Chudy

36-39
OVERVOLTAGE PROTECTION OF PV MICROINSTALLATIONS – REGULATORY REQUIREMENTS AND SIMULATION MODEL
Klara Janiga

40-43
DETERMINATION OF HYDRODYNAMIC PARAMETERS OF THE SEALED PRESSURE EXTRACTOR
Nataliaya Kosulina, Stanislav Kosulin, Kostiantyn Korshunov, Tetyana Nosova, Yana Nosova

44-47
DEVELOPMENT OF A DEVICE FOR MEASURING AND ANALYZING VIBRATIONS
Anzhelika Stakhova, Volodymyr Kvasnikov

48-51
METHOD OF OBTAINING THE SPECTRAL CHARACTERISTICS OF THE SCANNING PROBE MICROSCOPE
Mariia Kataieva, Vladimir Kvasnikov

52-55
BROADBAND SATELLITE DATA NETWORKS IN THE CONTEXT OF AVAILABLE PROTOCOLS AND DIGITAL PLATFORMS
ENGLISH
Jacek Wilk-Jakubowski

56-60

Authors

Marcin Wardach

marcin.wardach@zut.edu.pl

West Pomeranian University of Technology in Szczecin

http://orcid.org/0000-0002-1017-9054 (unauthenticated)

Paweł Prajzendanc

pawel.prajzendanc@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0002-1662-4390 (unauthenticated)

Kamil Cierzniewski

cierzniewski_kamil@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0003-3453-5233 (unauthenticated)

Michał Cichowicz

michal_cichowicz@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0002-8258-0330 (unauthenticated)

Szymon Pacholski

szymon_pacholski@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0002-7588-4168 (unauthenticated)

Mikołaj Wiszniewski

wm46928@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0002-8258-8922 (unauthenticated)

Krzysztof Baradziej

bk42039@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0003-1293-3409 (unauthenticated)

Szymon Osipowicz

os44085@zut.edu.pl

West Pomeranian University of Technology in Szczecin, Faculty of Electrical Engineering, Department of Electrical Machines and Drives, Szczecin, Poland

http://orcid.org/0000-0003-3938-6388 (unauthenticated)

Abstract

This paper presents the design and research results of a claw pole machine with hybrid excitation. This machine is excited by permanent magnets and an electromagnetic coil. Both excitation sources are located in the rotor of the machine. Additionally, the rotor is made of a laminated core. This approach facilitates the process of its construction and enables the implementation of even very complicated structure of the rotor, which would be difficult in case of making the rotor from a one piece of material. This paper presents the construction as well as the results of simulation and experimental tests of the machine prototype. The tests showed that the proposed machine has the ability to adjust the voltage in a wide range. Such as a feature could be used, for example, to increase the speed of motor operation in case of an electric vehicle application, but also to regulate the voltage in wind turbines which generators operate at varying rotor speeds resulting from changing wind speed.

Keywords:

wind energy, generators, permanent magnet machines, finite element analysis

References

Burkhardt Y., Schleicher K., Klöpzig M.: A novel hybrid excited synchronous machine for (H)EV applications, IEEE Xplore, 2014.

Di Barba P., Mognaschi M.E., Bonislawski M., Palka R., Paplicki P., Piotuch R., Wardach M.: Hybrid excited synchronous machine with flux control possibility. International Journal of Applied Electromagnetics and Mechanics 52/2016, 1615–1622 [http://doi.org/10.3233/JAE-162190].

Guo Y., Zhu J., Dorrell D., Lu H. Y., Wang Y.: Development of a Claw Pole Permanent Magnet Motor with a Molded Low-Density Soft Magnetic Composite Stator Core, Proceedings of IEEE Energy Conversion Conference & Expo 2009, 294–301.

Guo Y., Zhu J. G., Zhong J. J., Wu W.: Core Losses in Claw Pole Permanent Magnet Machines With Soft Magnetic Composite Stators. IEEE Transactions on Magnetics 39(5)/2003, 3199–3201.

Hua H., Zhu Z.Q., Zhan, H.: Novel Consequent-Pole Hybrid Excited Machine with Separated Excitation Stator. IEEE Transactions on Industrial Electronics 63/2016, 4718–4728.

Jahns T. M.: Flux-weakening regime operation of an interior permanent-magnet synchronous motor drive. IEEE Transactions on Industrial Application 23/1987, 681–689.

Leroy V., Foveau V.: Claw rotor equipped with an insulator for an excitation coil and magnets, and rotary electrical machine equipped with a claw rotor, patent US 20130009504 A1, 2013.

Melcescu L., Cistelecan M. V., Craiu O., Popescu M.: Numerical Analysis of Claw Pole Synchronous Machine with Hybrid Contactless Excitation. Electrical Review 7b/2012, 106–109.

Wang Y., Deng Z.: Hybrid Excitation Topologies and Control Strategies of Stator Permanent Magnet Machines for DC Power System. IEEE Transactions on Industrial Electronics 59/2012, 4601–4616.

Wardach M., Paplicki P., Palka R.: Hybrid Excited Machine with Flux Barriers and Magnetic Bridges. Energies 11/2018, 676 [http://doi.org/10.3390/en11030676].

Wardach M.: Hybrid excited claw pole generator with skewed and non-skewed permanent magnets. Open Physics 15/2017, 902–906 [http://doi.org/10.1515/phys-2017-0108].

Wardach M.: The Influence of Permanent Magnet Amount on No-load Parameters of Hybrid Excited Claw Pole Machine with Laminated Rotor. Selected Issues of Electrical Engineering and Electronics (WZEE’2018), Szczecin, Poland, 2018.

SIMULATION AND EXPERIMENTAL RESEARCH OF CLAW POLE MACHINE WITH A HYBRID EXCITATION AND LAMINATED ROTOR CORE. (2021). Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 11(2), 30-35. https://doi.org/10.35784/iapgos.2656

SIMULATION AND EXPERIMENTAL RESEARCH OF CLAW POLE MACHINE WITH A HYBRID EXCITATION AND LAMINATED ROTOR CORE

Issue Vol. 11 No. 2 (2021)

Archives

Authors

Abstract

Keywords:

References

License

Article Sidebar

Issue Vol. 11 No. 2 (2021)

Archives

Main Article Content

Authors

Abstract

Keywords:

References

Article Details

License