COIL DESIGN WITH LITZE WIRE FOR MAGNETIC PARTICLE SPECTROMETRY
Przemysław Wróblewski
P.Wroblewski@ire.pw.edu.plWarsaw University of Technology, Institute of Radioelectronics and Multimedia Technology, Department of Nuclear and Medical Electronics (Poland)
Waldemar Smolik
Warsaw University of Technology, Institute of Radioelectronics and Multimedia Technology, Department of Nuclear and Medical Electronics (Poland)
Abstract
The design of an excitation coil for magnetic particles spectrometer (MPS) was described. It was assumed that the spectrometer should measure the spectra of particles of diameter in the range 10-100 nm. To measure the amplitude and phase angle spectra of magnetic nanoparticles it is required to generate sinusoidal alternating spatially homogeneous magnetic field of magnitude of 20 mT. The work volume of the designed spectrometer was 20´20´20 mm allowing measurement of small samples. The estimation of magnetic properties of magnetic nanoparticles is crucial in Magnetic Particles Imaging. In this paper we described the excitation coil design which minimizes power losses on the coil related to heat emission. The resonance circuit operating on 20 kHz frequency was applied. Optimal litze wire configuration was proposed to negate skin and proximity effects. The numeric simulations for the optimal and commercially available suboptimal litze wire configurations were performed. The comparison of the results was shown and discussed.
Keywords:
magnetic field, nanoparticles, coils, spectroscopyReferences
Biederer S., et al.: Magnetization response spectroscopy of superparamagnetic nanoparticles for magnetic particle imaging. Journal of Physics D: Applied Physics 42.20/2009, 205007.
Google Scholar
Rauwerdink A.M., Weaver J.B.: Harmonic phase angle as a concentration-independent measure of nanoparticle dynamics. Medical Physics, 37/2010, 2587–2592.
Google Scholar
Wróblewski P., Szyszko J., Smolik W.T.: Development of MPI Mini Scanner Prototype - Coils Design. Imaging Systems and Techniques (IST), 2013 IEEE International Conference, Beijing, 164–168.
Google Scholar
Sullivan C.R., Zhang R.Y.: Simplified design method for litz wire. IEEE Applied Power Electronics Conference and Exposition-APEC 2014.
Google Scholar
Authors
Przemysław WróblewskiP.Wroblewski@ire.pw.edu.pl
Warsaw University of Technology, Institute of Radioelectronics and Multimedia Technology, Department of Nuclear and Medical Electronics Poland
Authors
Waldemar SmolikWarsaw University of Technology, Institute of Radioelectronics and Multimedia Technology, Department of Nuclear and Medical Electronics Poland
Statistics
Abstract views: 222PDF downloads: 68
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Jacek Kryszyn, Waldemar Smolik, TOOLBOX FOR 3D MODELLING AND IMAGE RECONSTRUCTION IN ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Mateusz Midura, Przemysław Wróblewski, Damian Wanta, Grzegorz Domański, Mateusz Stosio, Jacek Kryszyn, Waldemar T. Smolik, THE SYSTEM FOR COMPLEX MAGNETIC SUSCEPTIBILITY MEASUREMENT OF NANOPARTICLES WITH 3D PRINTED CARCASS FOR INTEGRATED RECEIVE COILS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 11 No. 1 (2021)
- Waldemar Smolik, Jacek Kryszyn, Tomasz Olszewski, Roman Szabatin , METHODS OF SMALL CAPACITANCE MEASUREMENT IN ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Jacek Kryszyn, Waldemar Smolik, Tomasz Olszewski, Roman Szabatin, DEVELOPMENT OF ELECTRICAL CAPACITANCE TOMOGRAPH DESIGN IN THE NUCLEAR AND MEDICAL ELECTRONICS DIVISION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Grzegorz Domański, Bogumił Konarzewski, Robert Kurjata, Krzysztof Zaremba, Janusz Marzec, Michał Dziewiecki, Marcin Ziembicki, Andrzej Rychter, Waldemar Smolik, Roman Szabatin, Piotr Brzeski, DEAD TIME MEASUREMENT BY TWO-SOURCE METHOD – OPTIMIZATION OF MEASUREMENT TIME DIVISION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 1 (2018)
- Jacek Kryszyn, Waldemar Smolik, 2D MODELLING OF A SENSOR FOR ELECTRICAL CAPACITANCE TOMOGRAPHY IN ECTSIM TOOLBOX , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Grzegorz Domański, Roman Szabatin, Jerzy Kalenik, Adam Jaworski, Przemysław Wróblewski, Waldemar Smolik, Robert Kurjata, Bogusław Konarzewski, Michał Dziewiecki, Janusz Marzec, Krzysztof Zaremba, Marcin Ziembicki, Andrzej Rychter, Jacek Kryszyn, Piotr Brzeski, Jan Szmidt, GAIN PREDICTION THEORY OF SINGLE FOIL GAS ELECTRON MULTIPLIER DETECTOR , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Waldemar Smolik, Jacek Kryszyn, LINEAR OVER RANGES ITERATIVE ALGORITHMS FOR IMAGE RECONSTRUCTION IN ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Przemysław Wróblewski, Waldemar Smolik, DEVELOPMENT OF MAGNETIC NANOPARTICLES TOMOGRAPHY IN NUCLEAR AND MEDICAL ELECTRONICS DIVISION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
