ALGORITHM OF TIME STAMPS DISTRIBUTION FOR DATA SYNCHRONIZATION OF VARIOUS MEASUREMENT SYSTEMS
Radosław Wajman
rwajman@kis.p.lodz.plLodz University of Technology, Institute of Applied Computer Science (Poland)
Tomasz Jaworski
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Paweł Fiderek
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Robert Banasiak
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Abstract
The described in this paper research refer to the finished project which aimed to build the measurement system for phase distribution calculation and two phase flow structure identification based on 3D ECT system. In the frame of this work the metrological validation of the measurement system was done where many of various measurement technics were applied parallel. In order to analyse the measurement results, there was a need to design the unified service of time stamps distribution for measurement data synchronization. The measured data were collected with different speed. This paper presents the designed universal network algorithm of the time stamps distribution.
Keywords:
measurement data synchronization, time stampsReferences
Fiderek P., Kucharski J.: A Computer Vision System for On-Line Two-Phase Gas-Liquid Flows Recognition Using Fuzzy Methods, Zeszyty naukowe AGH - Automatyka 15/3 (2011),s. 505-519, ISSN: 1429-3447
Google Scholar
Authors
Radosław Wajmanrwajman@kis.p.lodz.pl
Lodz University of Technology, Institute of Applied Computer Science Poland
Authors
Tomasz JaworskiLodz University of Technology, Institute of Applied Computer Science Poland
Authors
Paweł FiderekLodz University of Technology, Institute of Applied Computer Science Poland
Authors
Robert BanasiakLodz University of Technology, Institute of Applied Computer Science Poland
Statistics
Abstract views: 213PDF downloads: 102
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Wiktor Kania, Radoslaw Wajman, CKRIPT: A NEW SCRIPTING LANGUAGE FOR WEB APPLICATIONS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 2 (2022)
- Paweł Fiderek, Tomasz Jaworski, Robert Banasiak, Jacek Nowakowski, Jacek Kucharski, Radosław Wajman, INTELLIGENT SYSTEM FOR THE TWO-PHASE FLOWS DIAGNOSIS AND CONTROL ON THE BASIS OF RAW 3D ECT DATA , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Robert Banasiak, Radosław Wajman, Tomasz Jaworski, Paweł Fiderek, Dominik Sankowski, TWO-PHASE FLOW REGIME THREE-DIMENSONAL VISUALIZATION USING ELECTRICAL CAPACITANCE TOMOGRAPHY – ALGORITHMS AND SOFTWARE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Radosław Wajman, Henryk Fidos, Paweł Fiderek, Tomasz Jaworski, Jacek Nowakowski, Dominik Sankowski, Robert Banasiak, METROLOGICAL EVALUATION OF MEASUREMENT SYSTEM FOR TWO-PHASE FLOW FRACTIONS DETERMINATION USING 3D ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 3 (2013)
- Jacek Nowakowski, Robert Banasiak, Radosław Wajman, Dominik Sankowski, MULTI PHASE FLOW MEASUREMENTS WITH THE APPLICATION OF ECT/ERT DECART MULTIMODALITY TOMOGRAPH , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Radosław Wajman, Robert Banasiak, NEW TUNNEL BASED METHOD OF SENSITIVITY MATRIX CALCULATION FOR 3D CAPACITANCE TOMOGRAPHY IMAGE RECONSTRUCTION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 3 (2013)
- Paweł Fiderek, Radosław Wajman, Jacek Kucharski, TWO PHASE GAS-LIQUID FLOWS RECOGNITION USING FUZZY INFERENCE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 6 No. 1 (2016)
- Paweł Fiderek, Tomasz Jaworski, Radosław Wajman, Jacek Kucharski, FUZZY CLUSTERING OF RAW THREE DIMENSIONAL TOMOGRAPHIC DATA FOR TWO-PHASE FLOWS RECOGNITION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 5 No. 4 (2015)
- Robert Banasiak, Radosław Wajman, Henryk Fidos, Paweł Fiderek, Tomasz Jaworski, Jacek Nowakowski, Dominik Sankowski, APPLICATION OF 3D ELECTRICAL CAPACITANCE TOMOGRAPHY FOR PHASE FRACTION DETERMINATION AND STRUTURES IDENTIFICATION IN TWO-PHASE FLOWS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 3 (2013)
- Tomasz Jaworski, Jacek Kucharski, FUZZY EVALUATION OF VISUAL CONNECTEDNESS IN THERMOGRAPHY IMAGES OF CYLINDRICAL SURFACE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 5 No. 1 (2015)
