ANALYSIS AND STUDY OF ROLLING PARAMETERS OF COILS ON AN INCLINED PLANE
Larysa Gumeniuk
l.gumeniuk@lntu.edu.uaLutsk National Technical University (Ukraine)
https://orcid.org/0000-0002-7678-7060
Lesya Fedik
Lutsk National Technical University (Ukraine)
https://orcid.org/0000-0001-7505-3789
Volodymyr Didukh
Lutsk National Technical University (Ukraine)
https://orcid.org/0000-0002-7358-7709
Pavlo Humeniuk
Lutsk National Technical University (Ukraine)
Abstract
In the article, the patterns of movement of rolls of long-fiber plant crops on an inclined plane are investigated. Experimental data on determining the rolling time of rolls on an inclined plane with angles of inclination of 25° and 10° to the horizon for rolls of different mass and radius are processed. An analysis and investigation of the patterns of movement of these rolls have been carried out, including angular velocity, velocity of roll centers, rotation angle, and kinetic energy of the rolls.
Keywords:
data processing, rolling of rolls, optimization, computer graphicsReferences
[1] Hashim H. et al.: Evaluation of Coefficients of Friction for Cylinders, Rolling Down an Inclined Plane, by a Facile Video Analysis Technique. The physics educator 5(2), 2023 [https://doi.org/10.1142/S2661339523500051]
DOI: https://doi.org/10.1142/S2661339523500051
Google Scholar
[2] Fang M. et al.: Friction coefficient calibration of corn stalk particle mixtures using Plackett-Burman design and response surface methodology. Powder Technology 396, 2022, 731–742 [https://doi.org/10.1016/j.powtec.2021.10.040]
DOI: https://doi.org/10.1016/j.powtec.2021.10.040
Google Scholar
[3] Leblicq T. et al.: A discrete element approach for modelling bendable crop stems. Computers and Electronics in Agriculture 124, 2016, 141–149 [https://doi.org/10.1016/j.compag.2016.03.022]
DOI: https://doi.org/10.1016/j.compag.2016.03.022
Google Scholar
[4] Yaremenko V., Trokhanyak O.: Theory of Mechanisms and Machines. Center of Educational Literature, Kyiv 2023.
Google Scholar
[5] http://www.leonorm.lviv.ua/DG/2008/DSTU_2.HTM (available: 01.08.2006).
Google Scholar
Authors
Larysa Gumeniukl.gumeniuk@lntu.edu.ua
Lutsk National Technical University Ukraine
https://orcid.org/0000-0002-7678-7060
Lutsk National Technical University,
Ph.D.Eng. Associate Professor, Department of Automation and Computer – Integrated Technologies.
Research interests: modeling of reliability and safety of the automated control systems
Authors
Lesya FedikLutsk National Technical University Ukraine
https://orcid.org/0000-0001-7505-3789
Authors
Volodymyr DidukhLutsk National Technical University Ukraine
https://orcid.org/0000-0002-7358-7709
Authors
Pavlo HumeniukLutsk National Technical University Ukraine
Statistics
Abstract views: 43PDF downloads: 10
Most read articles by the same author(s)
- Natalia Grigorieva, Viktor Shabaykovich, Larysa Gumeniuk, Pavlo Humeniuk, Lubov Dobrovolska, Dmitry Sobchuk, WAYS TO PRODUCE RENEWABLE ENERGY FROM CARBON DIOXIDE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 10 No. 1 (2020)
- Volodymyr Lotysh, Larysa Gumeniuk, Pavlo Humeniuk, COMPARISON OF THE EFFECTIVENESS OF TIME SERIES ANALYSIS METHODS: SMA, WMA, EMA, EWMA, AND KALMAN FILTER FOR DATA ANALYSIS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 3 (2023)
- Larysa Gumeniuk, Vladimir Lotysh, Pavlo Gumeniuk, TOOLS FOR COMPARING THE RESULTS OF THE WORK OF SORTING ALGORITHMS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 2 (2018)
