IMPROVING MATERIAL FLOW IN A MODIFIED PRODUCTION SYSTEM
Dariusz Plinta
dplinta@ath.bielsko.plUniversity of Bielsko-Biala (Poland)
https://orcid.org/0000-0002-4638-5319
Katarzyna Radwan
University of Bielsko-Biala (Poland)
Abstract
Material flow management aims to ensure the consistency of supply and reliability of the production processes being carried out. The aim of the article is to present a model of material flow organisation in a changing production system operating under small batch production conditions. Carrying out simulations for various production scenarios will be the basis for developing an effective method of material flow management in small batch production of cutting tools.
Keywords:
modelling and simulation of production processes, material flow, production systemReferences
Allet, J. (2016). Production and Preparation Optimization in Single Production. Chandler-Gilbert Community College.
Google Scholar
Alquraish, M. (2022). Modelling and Simulation of Manufacturing Processes and Systems: Overview of Tools, Challenges, and Future Opportunities. Engineering, Technology & Applied Science Research, 12(6),9779–9786. https://doi.org/10.48084/etasr.5376
DOI: https://doi.org/10.48084/etasr.5376
Google Scholar
Blackstone, J. H. (2016). APICS Dictionary (15th edition). APICS.
Google Scholar
Bozarth, C. B., & Handfield, R. B. (2018). Introduction to Operations and Supply Chain Management (5th edition). Pearson Education.
Google Scholar
Burduk, A., Łapczyńska, D., & Popiel, P. (2021). Simulation modeling in production effectiveness improvement – case study. Management and Production Engineering Review, 12(2), 75–85. https://doi.org/10.24425/mper.2021.137680
Google Scholar
Butrat, A., & Supsomboon, S. (2022). A Plant Simulation approach for optimal resource utilization: A case study in the tire manufacturing industry. Advances in Production Engineering & Management, 17(2), 243–255. https://doi.org/10.14743/apem2022.2.434
DOI: https://doi.org/10.14743/apem2022.2.434
Google Scholar
Gola, A. (2014). Economic Aspects of Manufacturing Systems Design. Actual Problems of Economics, 6(156), 205–212.
Google Scholar
Gola, A. (2019). Reliability analysis of reconfigurable manufacturing structures using computer simulation methods. Eksploatacja i Niezawodność – Maintenance and Reliability, 21(1), 90–102. https://doi.org/10.17531/ein.2019.1.11
DOI: https://doi.org/10.17531/ein.2019.1.11
Google Scholar
Kelton, D. (2014). Simulation with Arena (sixth edition). Mc Graw Hill Education. Kłos, S., & Patalas-Maliszewska, J. (2020). Using the simulation method for modelling a manufacturing system of predictive maintenance. Advances in Intelligent Systems and Computing (vol. 1004, pp. 57–64). Springer. https://doi.org/10.1007/978-3-030-23946-6_7
DOI: https://doi.org/10.1007/978-3-030-23946-6_7
Google Scholar
Knosala, R. (2017). Inżynieria produkcji. Kompendium wiedzy. Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Kolny, D., Kurczyk, D., & Matuszek, J. (2019). Computer support of ergonomic analysis of working conditions at workstations. Applied Computer Science, 15(1), 49–61. https://doi.org/10.23743/acs-2019-04
DOI: https://doi.org/10.35784/acs-2019-04
Google Scholar
Lehocká, D., Hlavatý, I., & Hloch, S. (2016). Rationalization of material flow in production od semitrailer frame for automotive industry. Technical Gazette, 23(4), 163806. https://doi.org/10.17559/TV-20131113100109
DOI: https://doi.org/10.17559/TV-20131113100109
Google Scholar
Litwin, P., Mądziel, M., & Stadnicka, D. (2019). Simulations of Manufacturing Systems: Applications in Achieving the Intended Learning Outcomes. In: L.M. Camarinha-Matos, H.
Google Scholar
Afsarmanesh & D. Antonelli (Eds.), Collaborative Networks and Digital Transformation. PRO-VE 2019. IFIP Advances in Information and Communication Technology (vol. 568, pp. 615–623). Springer. https://doi.org/10.1007/978-3-030-28464-0_54
DOI: https://doi.org/10.1007/978-3-030-28464-0_54
Google Scholar
Maciąg, A., Pietroń, R., & Kukla, S. (2013). Prognozowanie i symulacja w przedsiębiorstwie. Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Małopolski, W. (2012). Modeling and optimization of manufacturing systems using Arena software. Technical Transactions: Mechanics, 109(8-M), 91–108.
Google Scholar
Pająk, E. (2021). Zarządzanie produkcją - produkt, technologia, organizacja. Wydawnictwo Naukowe PWN.
Google Scholar
Pająk, E., Klimkiewicz, M., & Kosieradzka, A. (2014). Zarządzanie produkcją i usługami. Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Plinta, D., & Kłaptocz, K. (2021). Virtual reality in production layout designing. Applied Computer Science, 17(1), 61–69. https://doi.org/10.23743/acs-2021-06
DOI: https://doi.org/10.35784/acs-2021-06
Google Scholar
Silva, V., Ferreira, L., Silva, F., Tjahjono, B., & Ávila, P. (2021). Simulation-Based Decision Support System to Improve Material Flow of a Textile Company. Sustainability, 13(5), 2947. https://doi.org/10.3390/su13052947
DOI: https://doi.org/10.3390/su13052947
Google Scholar
Szatkowski, K. (2014). Nowoczesne zarządzanie produkcją. Ujęcie procesowe. Wydawnictwo Naukowe PWN.
Google Scholar
Szatkowski, K. (2018). Przygotowanie produkcji. Wydawnictwo Naukowe PWN.
Google Scholar
Authors
Dariusz Plintadplinta@ath.bielsko.pl
University of Bielsko-Biala Poland
https://orcid.org/0000-0002-4638-5319
Authors
Katarzyna RadwanUniversity of Bielsko-Biala Poland
Statistics
Abstract views: 261PDF downloads: 142
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Dariusz Plinta, Karolina Kłaptocz, VIRTUAL REALITY IN PRODUCTION LAYOUT DESIGNING , Applied Computer Science: Vol. 17 No. 1 (2021)
- Dariusz PLINTA, Martin KRAJČOVIČ, APPLICATION OF THE AUGMENTED REALITY IN PRODUCTION PRACTICE , Applied Computer Science: Vol. 13 No. 2 (2017)
Similar Articles
- Ihor PYSMENNYI, Anatolii PETRENKO, Roman KYSLYI, GRAPH-BASED FOG COMPUTING NETWORK MODEL , Applied Computer Science: Vol. 16 No. 4 (2020)
- Sebastian BIAŁASZ, Ramon PAMIES, NUMERICAL SIMULATION OF THE DESIGN OF EXTRUSION PROCESS OF POLYMERIC MINI-TUBES , Applied Computer Science: Vol. 14 No. 3 (2018)
- Andrzej Jardzioch, Wioletta Marczak, APPLICATION OF A FUZZY CONTROLLER IN THE PROCESS OF AUTOMATED POLYETHYLENE FILM THICKNESS CONTROL , Applied Computer Science: Vol. 17 No. 3 (2021)
- Fernando Andrés CEVALLOS SALAS, DIGITAL NEWS CLASSIFICATION AND PUNCTUACTION USING MACHINE LEARNING AND TEXT MINING TECHNIQUES , Applied Computer Science: Vol. 20 No. 2 (2024)
- Sebastian CYGAN, Barbara BOROWIK, Bohdan BOROWIK, STREET LIGHTS INTELLIGENT SYSTEM, BASED ON THE INTERNET OF THINGS CONCEPT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Thanh-Nghia NGUYEN, Thanh-Hai NGUYEN, Ba-Viet NGO, R PEAK DETERMINATION USING A WDFR ALGORITHM AND ADAPTIVE THRESHOLD , Applied Computer Science: Vol. 18 No. 3 (2022)
- Hawkar ASAAD, Shavan ASKAR, Ahmed KAKAMIN, Nayla FAIQ, EXPLORING THE IMPACT OF ARTIFICIAL INTELLIGENCE ON HUMANROBOT COOPERATION IN THE CONTEXT OF INDUSTRY 4.0 , Applied Computer Science: Vol. 20 No. 2 (2024)
- Raphael Olufemi AKINYEDE, Temitayo Elijah BALOGUN, Abiodun Boluwade ROTIMI, Oluwasefunmi Busola FAMODIMU, A CUSTOMER-CENTRIC APPLICATION FOR A CINEMA HOUSE , Applied Computer Science: Vol. 16 No. 2 (2020)
- Damian KRASKA, Tomasz TRZEPIECIŃSKI, FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Damian KOLNY, Dorota WIĘCEK, Paweł ZIOBRO, Martin KRAJČOVIČ, APPLICATION OF A COMPUTER TOOL MONITORING SYSTEM IN CNC MACHINING CENTRES , Applied Computer Science: Vol. 13 No. 4 (2017)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
