NON–INVASIVE METHODS OF INDUSTRIAL PROCESSES CONTROL
Grzegorz Rybak
grybak@kis.p.lodz.plLodz University of Technology, Institute of Applied Computer Science (Poland)
Zbigniew Chaniecki
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Krzysztof Grudzień
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Andrzej Romanowski
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Dominik Sankowski
Lodz University of Technology, Institute of Applied Computer Science (Poland)
Abstract
Monitoring and control systems constitute an important group of diagnostic tools used in the industry. When selected properly, they allow for the early detection of adverse conditions of the process, making it possible to prevent catastrophes. While these systems are becoming more precise and effective it is essential to exploring the state of knowledge about the nature of the processes that are the domains of their proper execution. Based on a process of gravitational flow of solids proposed measuring and control system is described, which includes tools such as strain gauges, accelerometers and capacitance tomography sensors. Preliminary results of conducted tests confirmed the efficiency of the proposed system for the monitoring of an installation for storage and unloading of bulk solids. The flow rig is located in the Tom Dyakowski Process Tomography Lab at the Institute of Applied Computer Science.
Keywords:
measurements, accelerometer, strain gauge, capacitance tomography, industry, control, conveying, solid materialsReferences
Buchczik D., Ilewicz W., Piotrowski J., Waluś S., Wyżgolik R., Żelezik J.: Pomiary. Czujniki i metody pomiarowe wybranych wielkości fizycznych i składu chemicznego, Wydawnictwo Naukowo-Techniczne, Warszawa, 2009.
Google Scholar
Chaniecki Z.: Algorytmy przetwarzania i analizy danych pomiarowych elektrycznej tomografii pojemnościowej w diagnostyce wybranych procesów przemysłowych - rozprawa doktorska, Łódź, 2006.
Google Scholar
Chaniecki Z., Sankowski D.: Monitorowanie i diagnozowanie stanów dynamicznych z użyciem tomografii procesowej. Korbicz J. (red.): Diagnostyka procesów i systemów. Warszawa 2007, s. 388-394.
Google Scholar
Chaniecki Z., Grudzień K., Jaworski T., Rybak G., Romanowski A., Sankowski D.: Diagnostic system of gravitational solid flow based on weight and accelerometer signal analysis using wireless data transmission technology. Diagnostic of gravitational solid, vol. 17, no. 4, 2013, pp. 319-326.
Google Scholar
Grudzień K., Chaniecki Z., Rybak G., Niedostatkiewicz M., Matusiak B., Romanowski A.: Multi-measurement system of gravitational flow process in slim large-scale silo, 7th World Congress on Industrial Process Tomography, WCIPT7, Kraków, 2013.
Google Scholar
Grudzień K., Romanowski A., Chaniecki Z., Niedostatkiewicz M., Sankowski D.: Description of the silo flow and bulk solid pulsation detection using ECT. Flow Measurement and Instrumentation, 21, 2010, p. 198-206.
Google Scholar
Jaworski A. J., Dyakowski T.: Tomographic measurements of solids mass flow in dense pneumatic conveying. What do we need to know about the flow physics?, Proceedings of 2nd World Congress on Industrial Process Tomography, Hannover, Germany, pp. 353-361.
Google Scholar
Pląskowski A., Beck M. S., Thorn R., Dyakowski T.: Imaging Industrial flows, applications of electrical process tomography, Institute of Physics Publishing, Bristol, 1995.
Google Scholar
Romanowski A., Grudzień K., Aykroyd R., Williams R.: Advanced Statistical Analysis as a Novel Tool to Pneumatic Conveying Monitoring and Control Strategy Development, Particle & Particle Systems Characterization. vol. 23, no. 3-4, 2006, p. 289-296.
Google Scholar
Scott D. M., McCann H.: Process Imaging for Automatic Control, CRC, 2005.
Google Scholar
Sikora J., Wójtowicz S.: Industrial and Biological Tomography. Electrical Capacitance Tomography. Theoretical Basis and Applications, Instytut Elektrotechniki, 2010.
Google Scholar
Żółtowski B.: Podstawy diagnozowania maszyn. Wydawnictwo Uczelniane Uniwersytetu Techniczno-Przyrodniczego w Bydgoszczy, 2011.
Google Scholar
Authors
Grzegorz Rybakgrybak@kis.p.lodz.pl
Lodz University of Technology, Institute of Applied Computer Science Poland
Authors
Zbigniew ChanieckiLodz University of Technology, Institute of Applied Computer Science Poland
Authors
Krzysztof GrudzieńLodz University of Technology, Institute of Applied Computer Science Poland
Authors
Andrzej RomanowskiLodz University of Technology, Institute of Applied Computer Science Poland
Authors
Dominik SankowskiLodz University of Technology, Institute of Applied Computer Science Poland
Statistics
Abstract views: 337PDF downloads: 153
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Jacek Nowakowski, Piotr Ostalczyk, Dominik Sankowski, APPLICATION OF FRACTIONAL CALCULUS FOR MODELLING OF TWO-PHASE GAS/LIQUID FLOW SYSTEM , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Michał Majchrowicz, Paweł Kapusta, Lidia Jackowska-Strumiłło, Dominik Sankowski, ACCELERATION OF IMAGE RECONSTRUCTION PROCESS IN THE ELECTRICAL CAPACITANCE TOMOGRAPHY 3D IN HETEROGENEOUS, MULTI-GPU SYSTEM , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Robert Banasiak, Radosław Wajman, Tomasz Jaworski, Paweł Fiderek, Dominik Sankowski, TWO-PHASE FLOW REGIME THREE-DIMENSONAL VISUALIZATION USING ELECTRICAL CAPACITANCE TOMOGRAPHY – ALGORITHMS AND SOFTWARE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Rafał Jachowicz, Dominik Sankowski, OPTIMIZATION OF AFFILIATION DETERMINATION OF GEOPOINTS TO LIMITED AREAS ALGORITHMS FOR THE USE OF THE OPENSTREETMAP PROJECT , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 4 (2013)
- Mateusz Miłak, Agnieszka Leszczyńska, Krzysztof Grudzień, Andrzej Romanowski, Dominik Sankowski, SLUG FLOW VELOCITY ESTIMATION DURING PNEUMATIC CONVEYING OF BULK SOLID MATERIALS BASED ON IMAGE PROCESSING TECHNIQUES , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 9 No. 1 (2019)
- Krzysztof Grudzień, Dominik Sankowski, METHODS FOR MONITORING GRAVITATIONAL FLOW IN SILOS USING TOMOGRAPHY IMAGE PROCESSING , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Ayoub Saoud, Volodymyr Mosorov, Krzysztof Grudzień, SWIRL FLOW ANALYSIS BASED ON ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 6 No. 2 (2016)
- Volodymyr Mosorov, Krzysztof Grudzień, Dominik Sankowski, FLOW VELOCITY MEASUREMENT METHODS USING ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Radosław Wajman, Henryk Fidos, Paweł Fiderek, Tomasz Jaworski, Jacek Nowakowski, Dominik Sankowski, Robert Banasiak, METROLOGICAL EVALUATION OF MEASUREMENT SYSTEM FOR TWO-PHASE FLOW FRACTIONS DETERMINATION USING 3D ELECTRICAL CAPACITANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 3 (2013)
- Jacek Nowakowski, Robert Banasiak, Radosław Wajman, Dominik Sankowski, MULTI PHASE FLOW MEASUREMENTS WITH THE APPLICATION OF ECT/ERT DECART MULTIMODALITY TOMOGRAPH , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
