THE USE OF SIMULATION ENVIRONMENT FOR SOLVING THE ASSEMBLY LINE BALANCING PROBLEM
Wojciech DANILCZUK
wojciech.danilczuk@pollub.edu.plLublin University of Technology, Faculty of Mechanical Engineering, Department of Automation, Nadbystrzycka 36, 20-618 Lublin (Poland)
Abstract
The paper describes the application of a simulation environment (Tecnomatix Plant Simulation) for solving a real manufacturing problem. The studied case consisted in rebalancing the production line with a specified number of operators on the line. The first stage of the study involved determination of the production cycle and key performance indicators. The production system was then divided into work cells. After that, proposed design assumptions were verified via a simulation model.
Keywords:
line balancing problem, manufacturing simulation, production system modeling, Tecnomaix Plant Simulation, manufacturingReferences
Banks, J., Carson, J. S., Nelson, B. L., & Nicol, D. M. (2010). Discrete-Event System Simulation. USA: Prentice Hall.
Google Scholar
Bangsow, S. (2010). Manufacturing Simulation with Plant Simulation and SimTalk. Berlin: Springer.
DOI: https://doi.org/10.1007/978-3-642-05074-9
Google Scholar
Danilczuk, W., Gola, A., & Cechowicz, R. (2014). Analiza konfiguracji linii produkcyjnych na postawie modeli symulacyjnych. In K. Bzdyra (Ed.), Informatyczne Systemy Zarządzania (tom 5, pp.25–42). Koszalin: Wyd. Politechniki Koszalińskiej.
Google Scholar
Esmaeilian, B., Behdad, S., & Wang, B. (2016). The evolution and future of manufacturing: A review. Journal of Manufacturing Systems, 39, 79–100. https://doi.org/10.13140/RG.2.1.2720.0402
DOI: https://doi.org/10.1016/j.jmsy.2016.03.001
Google Scholar
Gola, A., & Wiechetek, Ł. (2017). Modelling and simulation of production flow in job-shop production system with enterprise dynamics software. Applied Computer Science, 13(4), 87–97. https://doi.org/10.23743/acs-2017-32
Google Scholar
Groover, M. (2000). Automation, Production Systems, and Computer-Integrated Manufacturing (2nd Edition). New York: Prentice hall.
Google Scholar
Grzechca, W. (2010). Dualność problem balansowania linii montażowej. In R. Knosala (Ed.), Komputerowo Zintegrowane Zarządzanie (pp. 532–539). Opole: Oficyna Wydaw. Polskiego Towarzystwa Zarządzania Produkcją.
Google Scholar
Helgeson, W. B, & Birnie, D. P. (1961). Assembly line balancing problem using ranked positional weights technique. Journal of Industrial Engineering, 12(6), 394–398.
Google Scholar
Kilbridge, M., & Wester, L. (1961). A Heuristic Method of Assembly Line Balancing. Journal of Industrial Engineering, 19(6), 292–298.
Google Scholar
Kłosowski, G., & Kozłowski, E. (2017). Optymalizacja wielokryterialna w procesie produkcji mebli. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska, 4, 101–106.
DOI: https://doi.org/10.5604/01.3001.0010.7372
Google Scholar
Longo, F. (2010). Emergency simulation: state of the art and future research guidelines. SCS M&S Magazine, 1(4), 2010-04.
Google Scholar
Salveson, M. E. (1955). The Assembly Line Balancing Problem. The Journal of Industrial Engineering, 6(3), 18–25.
DOI: https://doi.org/10.1115/1.4014559
Google Scholar
Scholl, A. (1999). Balancing and Sequencing of Assembly Lines. Physica-Verlag Heidelberg.
DOI: https://doi.org/10.1007/978-3-662-11223-6
Google Scholar
Zemczak, M. (2013). Zagadnienie balansowania linii montażowej i szeregowania zadań w systemach produkcji mixed-model. In K. Bzdyra (Ed.), Informatyczne Systemy Zarządzania (tom 4, pp. 115–128). Koszalin: Wyd. Politechniki Koszalińskiej.
Google Scholar
Plant Simulation. (n.d.). Retrieved 2018, from Siemens PLM Software website https://www.plm.automation.siemens.com/en/products/tecnomatix/manufacturingsimulation/material-flow/plant-simulation.shtml
Google Scholar
Authors
Wojciech DANILCZUKwojciech.danilczuk@pollub.edu.pl
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Automation, Nadbystrzycka 36, 20-618 Lublin Poland
Statistics
Abstract views: 127PDF downloads: 13
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Wojciech DANILCZUK, Arkadiusz GOLA, COMPUTER-AIDED MATERIAL DEMAND PLANNING USING ERP SYSTEMS AND BUSINESS INTELLIGENCE TECHNOLOGY , Applied Computer Science: Vol. 16 No. 3 (2020)
Similar Articles
- Piotr WITTBRODT, Iwona ŁAPUŃKA, Gulzhan BAYTIKENOVA, Arkadiusz GOLA, Alfiya ZAKIMOVA, IDENTIFICATION OF THE IMPACT OF THE AVAILABILITY FACTOR ON THE EFFICIENCY OF PRODUCTION PROCESSES USING THE AHP AND FUZZY AHP METHODS , Applied Computer Science: Vol. 18 No. 4 (2022)
- Agnieszka ZACHCIAŁ, Andrzej JARDZIOCH, APPLICATION OF SIMULATION RESEARCH TO ANALYSE THE PRODUCTION PROCESS IN TERMS OF SUSTAINABLE DEVELOPMENT , Applied Computer Science: Vol. 18 No. 3 (2022)
- Arkadiusz GOLA, Łukasz WIECHETEK, MODELLING AND SIMULATION OF PRODUCTION FLOW IN JOB-SHOP PRODUCTION SYSTEM WITH ENTERPRISE DYNAMICS SOFTWARE , Applied Computer Science: Vol. 13 No. 4 (2017)
- Sławomir KUKLA, Marek SMETANA, A SIMULATION EXPERIMENT AND MULTI-CRITERIA ASSESSMENT OF MANUFACTURING PROCESS FLOW VARIANTS TESTED ON A COMPUTER MODEL , Applied Computer Science: Vol. 13 No. 2 (2017)
- Jack OLESEN, Carl-Emil Houmøller PEDERSEN, Markus Germann KNUDSEN, Sandra TOFT, Vladimir NEDBAILO, Johan PRISAK, Izabela Ewa NIELSEN, Subrata SAHA, JOINT EFFECT OF FORECASTING AND LOT-SIZING METHOD ON COST MINIMIZATION OBJECTIVE OF A MANUFACTURER: A CASE STUDY , Applied Computer Science: Vol. 16 No. 4 (2020)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
- Maria TOMASIKOVA, Frantisek BRUMERČÍK, Aleksander NIEOCZYM, DESIGN AND DYNAMICS MODELING FOR ELECTRIC VEHICLE , Applied Computer Science: Vol. 13 No. 3 (2017)
- Jarosław ZUBRZYCKI, Antoni ŚWIĆ, Łukasz SOBASZEK, Juraj KOVAC, Ruzena KRALIKOVA, Robert JENCIK, Natalia SMIDOVA, Polyxeni ARAPI, Peter DULENCIN, Jozef HOMZA, CYBER-PHYSICAL SYSTEMS TECHNOLOGIES AS A KEY FACTOR IN THE PROCESS OF INDUSTRY 4.0 AND SMART MANUFACTURING DEVELOPMENT , Applied Computer Science: Vol. 17 No. 4 (2021)
- Dariusz Plinta, Karolina Kłaptocz, VIRTUAL REALITY IN PRODUCTION LAYOUT DESIGNING , Applied Computer Science: Vol. 17 No. 1 (2021)
- Janusz MLECZKO, Paweł BOBIŃSKI, PRODUCTION PLANNING IN CONDITIONS OF MASS CUSTOMIZATION BASED ON THEORY OF CONSTRAINTS , Applied Computer Science: Vol. 13 No. 4 (2017)
You may also start an advanced similarity search for this article.
