TESTS OF HTS 2G SUPERCONDUCTING TAPES USING THE LABVIEW ENVIRONMENT
Rafał KWOKA
m.majka@pollub.plLublin University of Technology, Institute of Electrical Engineering and Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin (Poland)
Janusz KOZAK
Electrotechnical Institute, Pożaryskiego 28, 04-703 Warsaw (Poland)
Michał MAJKA
Lublin University of Technology, Institute of Electrical Engineering and Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin (Poland)
Abstract
HTS 2G superconducting tapes without stabilizer are used for the construction of superconducting fault current limiters. The characteristics R =f(T) of the superconducting tape is essential for design of superconducting current limiters and analysis of their numerical models. The article presents the experimentally determined characteristics R=f(T) of the second generation superconducting tapes SF4050 and SF12050 using the LabVIEW integrated environment. The article describes the method of sample preparation and methodology of testing of HTS 2G superconducting tapes. The LabVIEW integrated environment was used for the testing, thanks to which it was possible to download, process and save measurement data.
Keywords:
superconducting windings, HTS tape, LabVIEW, superconducting fault current limiterReferences
Czerwinski, D., Jaroszynski, L., Majka, M., Kozak, J., & Charmas, B. (2016). Comparison of Overcurrent Responses of 2G HTS Tapes. IEEE Transactions on Applied Superconductivity, 26(3), 5602904. https://doi.org/10.1109/TASC.2016.2520080
DOI: https://doi.org/10.1109/TASC.2016.2520080
Google Scholar
Kozak, J., & Majka, M. (2014). Technologia łączenia taśm HTS 2G w uzwojeniach nadprzewodnikowych urządzeń elektrycznych. Przegląd Elektrotechniczny, 90(3), 157–160. https://doi.org/10.12915/pe.2014.03.34
Google Scholar
Kozak, J., Majka, M., & Kwoka, R. (2017). Badania taśm nadprzewodnikowych (2G HTS) bez stabilizatora. Przegląd Elektrotechniczny, 93(3), 185-188. https://doi.org/10.15199/48.2017.03.43
DOI: https://doi.org/10.15199/48.2017.03.43
Google Scholar
Kozak, J., Majka, M., Janowski, T., Kozak, S., Wojtasiewicz, G., & Kondratowicz-Kucewicz, B. (2011). Tests and performance analysis of coreless inductive HTS fault current limiters.
Google Scholar
IEEE Transactions on Applied Superconductivity, 21(3), 1303–1306. https://doi.org/10.1109/TASC.2010.2101033
DOI: https://doi.org/10.1109/TASC.2010.2101033
Google Scholar
LabVIEW National Instruments. (n.d.). Retrieved January 10, 2018, from LabVIEW National Instruments website, http://www.ni.com/pl-pl.html
Google Scholar
Naeckel, O., & Noe, M. (2014). Design and Test of an Air Coil Superconducting Fault Current Limiter Demonstrator, IEEE Trans. Appl. Supercond., 24(3), 5601605. https://doi.org/10.1109/TASC.2013.2286294
DOI: https://doi.org/10.1109/TASC.2013.2286294
Google Scholar
SuperPower Inc. (n.d.). Retrieved January 8, 2018, from SuperPower Inc. website, http://www.superpower-inc.com/content/2g-hts-wire
Google Scholar
Authors
Rafał KWOKAm.majka@pollub.pl
Lublin University of Technology, Institute of Electrical Engineering and Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin Poland
Authors
Janusz KOZAKElectrotechnical Institute, Pożaryskiego 28, 04-703 Warsaw Poland
Authors
Michał MAJKALublin University of Technology, Institute of Electrical Engineering and Electrotechnologies, Nadbystrzycka 38A, 20-618 Lublin Poland
Statistics
Abstract views: 32PDF downloads: 3
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Łukasz WOŹNIAK, Paweł SURDACKI, Leszek JAROSZYŃSKI, THE NUMERICAL MODEL OF 2G YBCO SUPERCONDUCTING TAPE IN THE WINDINGS OF THE TRANSFORMER , Applied Computer Science: Vol. 13 No. 2 (2017)
- Yehor TATARCHENKO, Volodymyr LYFAR, Halyna TATARCHENKO, INFORMATION MODEL OF SYSTEM OF SUPPORT OF DECISION MAKING DURING MANAGEMENT OF IT COMPANIES , Applied Computer Science: Vol. 16 No. 1 (2020)
- Jacek CABAN, Grzegorz LITAK, Bartłomiej AMBROŻKIEWICZ, Leszek GARDYŃSKI, Paweł STĄCZEK, Piotr WOLSZCZAK, IMPACT-BASED PIEZOELECTRIC ENERGY HARVESTING SYSTEM EXCITED FROM DIESEL ENGINE SUSPENSION , Applied Computer Science: Vol. 16 No. 3 (2020)
- Damian KOLNY, Dorota WIĘCEK, Paweł ZIOBRO, Martin KRAJČOVIČ, APPLICATION OF A COMPUTER TOOL MONITORING SYSTEM IN CNC MACHINING CENTRES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Gamze Ogcu KAYA, Ali TURKYILMAZ, INTERMITTENT DEMAND FORECASTING USING DATA MINING TECHNIQUES , Applied Computer Science: Vol. 14 No. 2 (2018)
- Sebastian CYGAN, Barbara BOROWIK, Bohdan BOROWIK, STREET LIGHTS INTELLIGENT SYSTEM, BASED ON THE INTERNET OF THINGS CONCEPT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Janani DEWMINI, W Madushan FERNANDO, Izabela Iwa NIELSEN, Grzegorz BOCEWICZ, Amila THIBBOTUWAWA, Zbigniew BANASZAK, IDENTIFYING THE POTENTIAL OF UNMANNED AERIAL VEHICLE ROUTING FOR BLOOD DISTRIBUTION IN EMERGENCY REQUESTS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Isaac FLORES-HERNÁNDEZ, Edmundo BONILLA-HUERTA, Perfecto MALAQUIAS QUINTERO-FLORES, Oscar Atriano PONCE, José Crispín HERNÁNDEZ-HERNÁNDEZ, APPLYING INTELLIGENT TECHNIQUES FOR TALENT RECRUITMENT , Applied Computer Science: Vol. 15 No. 2 (2019)
- Quirino ESTRADA, Dariusz SZWEDOWICZ, Julio C. VERGARA, José SOLIS, Miguel A. PAREDES, Lara WIEBE, Jesús M. SILVA, NUMERICAL SIMULATIONS OF SANDWICH STRUCTURES UNDER LATERAL COMPRESSION , Applied Computer Science: Vol. 15 No. 2 (2019)
- Sylwester KORGA, Marcin BARSZCZ, Krzysztof DZIEDZIC, DEVELOPMENT OF SOFTWARE FOR IDENTIFICATION OF FILAMENTS USED IN 3D PRINTING TECHNOLOGY , Applied Computer Science: Vol. 15 No. 1 (2019)
You may also start an advanced similarity search for this article.
