THE INFLUENCE OF THE INJECTION TIMING ON THE PERFORMANCE OF TWO-STROKE OPPOSED-PISTON DIESEL ENGINE

Abani, N., Chiang, M., Thomas, I., Nagar, N., Zermeno, R., & Regner, G. (2017). Developing a 55+ BTE Commercial Heavy-Duty Opposed-Piston Engine without a Waste Heat Recovery System. In Heavy-Duty-, On-und Off-Highway-Motoren 2016 (pp. 292–310). Wiesbaden: Springer Vieweg. https://doi.org/10.1007/978-3-658-19012-5_17
DOI: https://doi.org/10.1007/978-3-658-19012-5_17   Google Scholar

Agarwal, A. K., Srivastava, D. K., Dhar, A., Maurya, R. K., Shukla, P. C., & Singh, A. P. (2013). Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine. Fuel, 111, 374–383. https://doi.org/10.1016/j.fuel.2013.03.016
DOI: https://doi.org/10.1016/j.fuel.2013.03.016   Google Scholar

Assanis, D. N., Filipi, Z. S., Fiveland, S. B., & Syrimis, M. (2003). A predictive ignition delay correlation under steady-state and transient operation of a direct injection diesel engine. Journal of Engineering for Gas Turbines and Power, 125(2), 450–457. https://doi.org/10.1115/1.1563238
DOI: https://doi.org/10.1115/1.1563238   Google Scholar

Bari, S., Yu, C. W., & Lim, T. H. (2004). Effect of fuel injection timing with waste cooking oil as a fuel in a direct injection diesel engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218(1), 93–104. https://doi.org/10.1243/095440704322829209
DOI: https://doi.org/10.1243/095440704322829209   Google Scholar

Blair G.P. (1996). Design and simulation of two-stroke engines. Warrendale: Society of Automotive Engineers Inc.
DOI: https://doi.org/10.4271/R-161   Google Scholar

Cantore, G., Mattarelli, E., & Rinaldini, C. A. (2014). A new design concept for 2-Stroke aircraft diesel engines. Energy Procedia, 45, 739-748. https://doi.org/10.1016/j.egypro.2014.01.079
DOI: https://doi.org/10.1016/j.egypro.2014.01.079   Google Scholar

Ganapathy, T., Gakkhar, R. P., & Murugesan, K. (2011). Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine. Applied energy, 88(12), 4376-4386. https://doi.org/10.1016/j.apenergy.2011.05.016
DOI: https://doi.org/10.1016/j.apenergy.2011.05.016   Google Scholar

Heywood, J. B. (1988). Internal combustion engine fundamentals. New York: McGraw-Hill Education.
  Google Scholar

Katrašnik, T., Trenc, F., & Oprešnik, S. R. (2006). A new criterion to determine the start of combustion in diesel engines. Journal of engineering for gas turbines and power, 128(4), 928-933. https://doi.org/10.1115/1.2179471
DOI: https://doi.org/10.1115/1.2179471   Google Scholar

Kobori, S., Kamimoto, T., & Aradi, A. A. (2000). A study of ignition delay of diesel fuel sprays. International Journal of Engine Research, 1(1), 29-39. https://doi.org/10.1243/1468087001545245
DOI: https://doi.org/10.1243/1468087001545245   Google Scholar

Ma, F., Zhao, C., Zhang, F., Zhao, Z., Zhang, Z., Xie, Z., & Wang, H. (2015). An experimental investigation on the combustion and heat release characteristics of an opposed-piston folded-cranktrain diesel engine. Energies, 8(7), 6365-6381. https://doi.org/10.3390/en8076365
DOI: https://doi.org/10.3390/en8076365   Google Scholar

Mani, M., & Nagarajan, G. (2009). Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil. Energy, 34(10), 1617-1623. https://doi.org/10.1016/j.energy.2009.07.010
DOI: https://doi.org/10.1016/j.energy.2009.07.010   Google Scholar

Patton, K. J., Nitschke, R. G., & Heywood, J. B. (1989). Development and Evaluation of a Friction Model for Spark-Ignition Engines. SAE Technical Paper, 890836. https://doi.org/10.4271/890836
DOI: https://doi.org/10.4271/890836   Google Scholar

Pirault, J.-P., & Flint M. (2010). Opposed piston engines: evolution, use, and future applications. SAE International.
DOI: https://doi.org/10.4271/R-378   Google Scholar

Pulkrabek, W. W. (1997). Engineering fundamentals of the internal combustion engine (No. 621.43 P8). New York: Pearson.
  Google Scholar

Regner, G., Herold, R. E., Wahl, M. H., Dion, E., Redon, F., Johnson, D., Callahan, B. J., & McIntyre, S. (2014). The achates power opposed-piston two-stroke engine: performance
  Google Scholar

and emissions results in a medium-duty application (2011-01-2221, pp. 2726–2735). SAE International. https://doi.org/10.4271/2011-01-2221
DOI: https://doi.org/10.4271/2011-01-2221   Google Scholar

Regner, G., Koszewnik, J., & Venugopal, R. (2014). Optimizing combustion in an opposed-piston, two-stroke (OP2S) diesel engine. San Diego: Achates Power, Inc. Rotrex Technical Datasheet C30 Range. (n.d.). Retrieved April 17, 2018, from Rotrex website, http://www.rotrex.com/Home/Technology/Product_Technical_Data
DOI: https://doi.org/10.1007/978-3-658-05016-0_39   Google Scholar

Sahoo, P. K., & Das, L. M. (2009). Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine. Fuel, 88(6), 994-999. https://doi.org/10.1016/j.fuel.2008.11.012
DOI: https://doi.org/10.1016/j.fuel.2008.11.012   Google Scholar

Sayin, C., & Canakci, M. (2009). Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine. Energy conversion and management, 50(1), 203-213. https://doi.org/10.1016/j.enconman.2008.06.007
DOI: https://doi.org/10.1016/j.enconman.2008.06.007   Google Scholar

Sayin, C., Ilhan, M., Canakci, M., & Gumus, M. (2009). Effect of injection timing on the exhaust emissions of a diesel engine using diesel–methanol blends. Renewable Energy, 34(5), 1261–1269. https://doi.org/10.1016/j.renene.2008.10.010
DOI: https://doi.org/10.1016/j.renene.2008.10.010   Google Scholar

Stiesch, G. (2003). Modeling Engine Spray and Combustion Processes. Berlin: Springer-Verlag.
DOI: https://doi.org/10.1007/978-3-662-08790-9   Google Scholar