MODEL OF A COMPUTER SYSTEM FOR SELECTION OF OPERATING PARAMETERS FOR TRANSPORT VEHICLES IN THE ASPECT OF THEIR DURABILITY
Łukasz WOJCIECHOWSKI
l.wojciechowski@pollub.plLublin University of Technology, Faculty of Mechanical Engineering, Institute of Technological Systems of Information, Nadbystrzycka Street 36, 20-618 Lublin (Poland)
Tadeusz CISOWSKI
* Polish Air Force Academy, Department of Logistics, Dywizjonu 303 Street 35, 08-521 Dęblin, (Poland)
Abstract
The article presents a new method of selecting operating parameters of vehicles which allows to prolong their useful life. The theoretical and practical aspects of the new approach were discussed. The key methods of optimizing the use of vehicles and their transport routes were analysed. The proposed method of selecting operating parameters of transport vehicles was based on elements of the dynamic programming model using heuristic algorithms. A model and then an algorithm and a computer program for selecting operating parameters for vehicles were developed.
Keywords:
economy and management, economy in transport, technological systemsReferences
Rais, A., Alvelos, F., & Carvalho, M. S. (2014). New mixed integer-programming model for the pickupand-delivery problem with transshipment. European Journal of Operational Research, 235, 34–46.
DOI: https://doi.org/10.1016/j.ejor.2013.10.038
Google Scholar
Cisowski, T. (2016). Rating urban bus operation based on parameter complexity of their routes. Autobusy: technika, eksploatacja, systemy transportowe, 17(6), 821–824.
Google Scholar
Cisowski, T. (2016). Rationalization of the carriage / collection of goods with one airport taking into account the time factor. Autobusy: technika, eksploatacja, systemy transportowe, 17(6), 1287–1293.
Google Scholar
Hao, C., & Yue, Y. (2016). Optimization on Combination of Transport Routes and Modes on Dynamic Programming for a Container Multimodal Transport System. Procedia Engineering, 137, 382–390. https://doi.org/10.1016/j.proeng.2016.01.272
DOI: https://doi.org/10.1016/j.proeng.2016.01.272
Google Scholar
Koralewski, G., Wrona, J., & Wrona, R. (2016). Research of the city bus in his maintenance conditions. Autobusy: technika, eksploatacja, systemy transportowe, 17(11), 82–84.
Google Scholar
Koralewski, G., & Wrona, R. (2014). Modelowanie ruchu autobusu miejskiego dla celów optymalizacji układu napędowego. Logistyka, 3, 3065–3074.
Google Scholar
Koralewski, G., & Wrona, R. (2015). Ocena wpływu czynników eksploatacyjnych na algorytmy przełączania biegów autobusów miejskich. Logistyka, 4, 4151–4160.
Google Scholar
Lotko, A., Lotko, M., & Longwic, R., (2016). Different multidimensional exploratory techniques in classifying variables into qualitative criteria of spare parts selection for passenger cars. Advances in Science and Technology Research Journal, 10(31), 185–193. https://doi.org/10.12913/22998624/64013
DOI: https://doi.org/10.12913/22998624/64013
Google Scholar
Pires, M. C., & Frazzon, E. M. (2016). On the research of linear programming solving methods for non-hierarchical spare parts supply chain planning. IFAC-PapersOnLine, 49(30), 198–203. doi:10.1016/j.ifacol.2016.11.167
DOI: https://doi.org/10.1016/j.ifacol.2016.11.167
Google Scholar
Pawełczyk, M. (2005). Advisor – package for simulation tests of autonomous vehicles. Prace Naukowe, seria Transport, 1(21). Radom: Wydawnictwo Politechniki Radomskiej.
Google Scholar
Wojciechowski, Ł., Cisowski, T., & Pazowski, P. (2015). Synthesis of decision models and algorithms in manufacturing systems. Applied Mechanics and Materials, 791, 108–115. https://doi.org/10.4028/www.scientific.net/AMM.791.108
DOI: https://doi.org/10.4028/www.scientific.net/AMM.791.108
Google Scholar
Authors
Łukasz WOJCIECHOWSKIl.wojciechowski@pollub.pl
Lublin University of Technology, Faculty of Mechanical Engineering, Institute of Technological Systems of Information, Nadbystrzycka Street 36, 20-618 Lublin Poland
Authors
Tadeusz CISOWSKI* Polish Air Force Academy, Department of Logistics, Dywizjonu 303 Street 35, 08-521 Dęblin, Poland
Statistics
Abstract views: 180PDF downloads: 12
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Sławomir KUKLA, Marek SMETANA, A SIMULATION EXPERIMENT AND MULTI-CRITERIA ASSESSMENT OF MANUFACTURING PROCESS FLOW VARIANTS TESTED ON A COMPUTER MODEL , Applied Computer Science: Vol. 13 No. 2 (2017)
- Anusha NALLAPAREDDY, DETECTION AND CLASSIFICATION OF VEGETATION AREAS FROM RED AND NEAR INFRARED BANDS OF LANDSAT-8 OPTICAL SATELLITE IMAGE , Applied Computer Science: Vol. 18 No. 1 (2022)
- Michał BIAŁY, Marcin SZLACHETKA, CRANK-PISTON MODEL OF INTERNAL COMBUSTION ENGINE USING CAD/CAM/CAE IN THE MSC ADAMS , Applied Computer Science: Vol. 13 No. 1 (2017)
- Paweł KARPIŃSKI, THE INFLUENCE OF THE INJECTION TIMING ON THE PERFORMANCE OF TWO-STROKE OPPOSED-PISTON DIESEL ENGINE , Applied Computer Science: Vol. 14 No. 2 (2018)
- Damian GIEBAS, Rafał WOJSZCZYK, GRAPHICAL REPRESENTATIONS OF MULTITHREADED APPLICATIONS , Applied Computer Science: Vol. 14 No. 2 (2018)
- Benjamin KOMMEY, Ernest Ofosu ADDO, Elvis TAMAKLOE, Eric Tutu TCHAO, Henry NUNOO-MENSAH, A SIX-PORT MEASUREMENT DEVICE FOR HIGH POWER MICROWAVE VECTOR NETWORK ANALYSIS , Applied Computer Science: Vol. 18 No. 3 (2022)
- Rafał WOJSZCZYK, VERIFICATION OF ACCURACY AND COST OF USE METHODS OF QUALITY ASSESSMENT OF IMPLEMENTATION OF DESIGN PATTERNS , Applied Computer Science: Vol. 15 No. 1 (2019)
- Amina ALYAMANI, Oleh YASNIY, CLASSIFICATION OF EEG SIGNAL BY METHODS OF MACHINE LEARNING , Applied Computer Science: Vol. 16 No. 4 (2020)
- Jack OLESEN, Carl-Emil Houmøller PEDERSEN, Markus Germann KNUDSEN, Sandra TOFT, Vladimir NEDBAILO, Johan PRISAK, Izabela Ewa NIELSEN, Subrata SAHA, JOINT EFFECT OF FORECASTING AND LOT-SIZING METHOD ON COST MINIMIZATION OBJECTIVE OF A MANUFACTURER: A CASE STUDY , Applied Computer Science: Vol. 16 No. 4 (2020)
- Mateusz Sawa, Mirosław Szala, Weronika Henzler, INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY , Applied Computer Science: Vol. 17 No. 3 (2021)
You may also start an advanced similarity search for this article.
