INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY

Mateusz Sawa; Mirosław Szala; Weronika Henzler

doi:10.23743/acs-2021-24

Published: Sep 30, 2021

DOI: https://doi.org/10.23743/acs-2021-24

Issue Vol. 17 No. 3 (2021)

Articles

PERFORMANCE ENHANCEMENT OF CUDA APPLICATIONS BY OVERLAPPING DATA TRANSFER AND KERNEL EXECUTION
K. Raju, Niranjan N Chiplunkar

5-18
BREAST CANCER DIAGNOSIS USING WRAPPER-BASED FEATURE SELECTION AND ARTIFICIAL NEURAL NETWORK
Nawazish NAVEED, Hayan T. MADHLOOM, Mohd Shahid HUSAIN

19-30
APPLICATION OF A FUZZY CONTROLLER IN THE PROCESS OF AUTOMATED POLYETHYLENE FILM THICKNESS CONTROL
Andrzej Jardzioch, Wioletta Marczak

31-46
OPTIMAL SLIDING MODE CONTROLLER DESIGN BASED ON WHALE OPTIMIZATION ALGORITHM FOR LOWER LIMB REHABILITATION ROBOT
Noor SABAH, Ekhlas HAMEED, Muayed S AL-HUSEINY

47-59
BACKWARD MOTION PLANNING AND CONTROL OF MULTIPLE MOBILE ROBOTS MOVING IN TIGHTLY COUPLED FORMATIONS
Kuppan Chetty RAMANATHAN, Manju MOHAN, Joshuva AROCKIA DHANRAJ

60-72
RGB-D FACE RECOGNITION USING LBP-DCT ALGORITHM
Sunil Kumar B L, Sharmila Kumari M

73-81
IMPLEMENTATION OF DYNAMIC AND FAST MINING ALGORITHMS ON INCREMENTAL DATASETS TO DISCOVER QUALITATIVE RULES
Pannangi Naresh, R. Suguna

82-91
INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY
Mateusz Sawa, Mirosław Szala, Weronika Henzler

92-105

DOI

https://doi.org/10.23743/acs-2021-24

Authors

Mateusz Sawa

mateusz.sawa1@pollub.edu.pl

Lublin University Of Technology, Mechanical Engineering Faculty, Department of Materials Engineering, Students Research Group of Materials Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Mirosław Szala

m.szala@pollub.pl

Lublin University Of Technology, Mechanical Engineering Faculty, Department of Materials Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland

Weronika Henzler

weronika.henzler@pollub.edu.pl

Lublin University Of Technology, Mechanical Engineering Faculty, Department of Materials Engineering, Students Research Group of Materials Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Abstract

This work shows a case study into 3D modelling, numerical simulations, and preliminary research of self-designed test rig dedicated for uniaxial tensile testing using pillar press. Innovative device was CAD modelled, FEM optimized, build-up according to the technological documentations. Then, the device utilization for tensile testing was validated via preliminary research. 3D model of the device was designed and FEM-analyzed using Solid Edge 2020 software. The set of FEM simulations for device components made of structural steel and stainless steel and at a workload equal 20 kN were conducted. This made it possible to optimize dimensions and selection of material used for individual parts of the device structure. Elaborated technical documentation allows for a build-up of a device prototype which was fixed into the pillar press. After that, the comparative preliminary experiments regarding tensile strength tests of X5CrNi18-10 (AISI 304) specimens were carried out. Tests were done using the commercial tensile strength machine and obtained results were compared with those received from an invented device. The ultimate tensile strength of X5CrNi18-10 steel, estimated using the commercial device (634 MPa) and results obtained from the patented device (620 MPa), were in the range of the standardized values. Findings confirm the utilization of the invented device for tensile strength testing.

Keywords:

tensile strength, FEM, CAD modelling, stainless steel, mechanical engineering

References

Amininejad, A., Jamaati, R., & Hosseinipour, S. J. (2019). Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling. Materials Science and Engineering: A, 767, 138433. https://doi.org/10.1016/j.msea.2019.138433 DOI: https://doi.org/10.1016/j.msea.2019.138433

Branco, R., Costa, J. D., Martins Ferreira, J. A., Capela, C., Antunes, F. V., & Macek, W. (2021). Multiaxial fatigue behaviour of maraging steel produced by selective laser melting. Materials & Design, 201, 109469. https://doi.org/10.1016/j.matdes.2021.109469 DOI: https://doi.org/10.1016/j.matdes.2021.109469

Caban, J., Nieoczym, A., & Gardyński, L. (2021). Strength analysis of a container semi-truck frame. Engineering Failure Analysis, 127, 105487. https://doi.org/10.1016/j.engfailanal.2021.105487 DOI: https://doi.org/10.1016/j.engfailanal.2021.105487

Dziubińska, A., Surdacki, P., Winiarski, G., Bulzak, T., Majerski, K., & Piasta, M. (2021). Analysis of the New Forming Process of Medical Screws with a Cylindrical Head of 316 LVM Steel. Materials, 14(4), 710. https://doi.org/10.3390/ma14040710 DOI: https://doi.org/10.3390/ma14040710

EN 10088-2:2014 – Stainless steels. Part 2: Technical delivery conditions for sheet/plate and strip for general purposes. (2014). ISO.

Estrada, Q., Szwedowicz, D., Vergara, J., Solis, J., Paredes, M., Wiebe, L., & Silva, J. (2019). Numerical simulations of sandwich structures under lateral compression. Applied Computer Science, 15(2), 31–41. https://doi.org/10.23743/acs-2019-11

Falkowicz, K., Ferdynus, M., & Wysmulski, P. (2015). FEM analysis of critical loads plate with cut-out. Applied Computer Science, 11(2), 43-49.

Ha, H.-Y., Jang, J. H., Lee, T.-H., Won, C., Lee, C.-H., Moon, J., & Lee, C.-G. (2018). Investigation of the Localized Corrosion and Passive Behavior of Type 304 Stainless Steels with 0.2–1.8 wt % B. Materials, 11(11), 2097. https://doi.org/10.3390/ma11112097 DOI: https://doi.org/10.3390/ma11112097

Haizhou, W. (2020). Geosynthetic material tensile strength detection device for hydraulic engineering detection. CN212254881 (U), 2020-12-29, Tianjin Xinan Eng Testing Co Ltd.

Hamidah, I., Wati, R., & Hamdani, R. A. (2018). Analysis of AISI 304 Tensile Strength as an Anchor Chain of Mooring System. IOP Conference Series: Materials Science and Engineering, 367, 012058. https://doi.org/10.1088/1757-899X/367/1/012058 DOI: https://doi.org/10.1088/1757-899X/367/1/012058

ISO 4136:2012 Destructive tests on welds in metallic materials—Transverse tensile test. (2012). ISO.

ISO 6892-1: Metallic materials – Tensile testing – Part 1: Method of test at room temperature. (2010). ISO.

Janeczek, A., Tomków, J., & Fydrych, D. (2021). The Influence of Tool Shape and Process Parameters on the Mechanical Properties of AW-3004 Aluminium Alloy Friction Stir Welded Joints. Materials, 14(12), 3244. https://doi.org/10.3390/ma14123244 DOI: https://doi.org/10.3390/ma14123244

Jonak, J., Karpiński, R., & Wójcik, A. (2021). Influence of the Undercut Anchor Head Angle on the Propagation of the Failure Zone of the Rock Medium—Part II. Materials, 14(14), 3880. https://doi.org/10.3390/ma14143880 DOI: https://doi.org/10.3390/ma14143880

Kawecki, B., & Podgórski, J. (2017). Numerical results quality in dependence on abaqus plane stress elements type in big displacements compression test. Applied Computer Science, 13(4), 56–64. https://doi.org/10.23743/acs2017-29

Kilicaslan, M. F., Elburni, S. I., & Akgul, B. (2021). The Effects of Nb Addition on the Microstructure and Mechanical Properties of Melt Spun Al-7075 Alloy. Advances in Materials Science, 21(2), 16–25. https://doi.org/10.2478/adms-2021-0008 DOI: https://doi.org/10.2478/adms-2021-0008

Kłonica, M. (2018). Analysis of the effect of selected factors on the strength of adhesive joints. IOP Conference Series: Materials Science and Engineering, 393, 012041. https://doi.org/10.1088/1757-899X/393/1/012041 DOI: https://doi.org/10.1088/1757-899X/393/1/012041

Kowal, M., & Szala, M. (2020). Diagnosis of the microstructural and mechanical properties of over century-old steel railway bridge components. Engineering Failure Analysis, 110, 104447. https://doi.org/10.1016/j.engfailanal.2020.104447 DOI: https://doi.org/10.1016/j.engfailanal.2020.104447

Lubas, M., & Witek, L. (2021). Influence of Hole Chamfer Size on Strength of Blind Riveted Joints. Advances in Science and Technology. Research Journal, 15(2), 49–56. https://doi.org/10.12913/22998624/135632 DOI: https://doi.org/10.12913/22998624/135632

Lyalin Mikhajlovich, V., Zykov Mikhajlovich, S., & Sidorov Aleksandrovich, R. (2021). Installation for Dynamic Tensile Testing of Flat Samples of Materials. RU2744319 (C1). Federalnoe Gosudarstvennoe Byudzhetnoe Obrazovatelnoe Uchrezhdenie Vysshego Obrazovaniya Tulskij Gos.

Łabanowski, J., Jurkowski, M., Fydrych, D., & Rogalski, G. (2017). Durability of welded water supply pipelines made of austenitic stainless steels. Welding Technology Review, 89(8), 35–40. https://doi.org/10.26628/wtr.v89i8.801 DOI: https://doi.org/10.26628/ps.v89i8.801

Macek, W., Branco, R., Trembacz, J., Costa, J. D., Ferreira, J. A. M., & Capela, C. (2020). Effect of multiaxial bending-torsion loading on fracture surface parameters in high-strength steels processed by conventional and additive manufacturing. Engineering Failure Analysis, 118, 104784. https://doi.org/10.1016/j.engfailanal.2020.104784 DOI: https://doi.org/10.1016/j.engfailanal.2020.104784

Macek, W., Szala, M., Trembacz, J., Branco, R., & Costa, J. (2020). Effect of non-zero mean stress bendingtorsion fatigue on fracture surface parameters of 34CrNiMo6 steel notched bars. Production Engineering Archives, 26(4), 167-173. https://doi.org/10.30657/pea.2020.26.30 DOI: https://doi.org/10.30657/pea.2020.26.30

Machrowska, A., Karpiński, R., Jonak, J., Szabelski, J., & Krakowski, P. (2020). Numerical prediction of the component-ratio-dependent compressive strength of bone cement. Applied Computer Science, 16(3), 88–101. https://doi.org/10.23743/acs-2020-24

Mahmood, M. A., Popescu, A. C., Oane, M., Chioibasu, D., Popescu-Pelin, G., Ristoscu, C., & Mihailescu, I. N. (2021). Grain refinement and mechanical properties for AISI304 stainless steel single-tracks by laser melting deposition: Mathematical modelling versus experimental results. Results in Physics, 22, 103880. https://doi.org/10.1016/j.rinp.2021.103880 DOI: https://doi.org/10.1016/j.rinp.2021.103880

Nedeloni, M. D., Birtărescu, E., Nedeloni, L., Ene, T., Băra, A., & Clavac, B. (2018). Cavitation Erosion and Dry Sliding Wear Research on X5CrNi18-10 Austenitic Stainless Steel. IOP Conference Series: Materials Science and Engineering, 416, 012028. https://doi.org/10.1088/1757-899X/416/1/012028 DOI: https://doi.org/10.1088/1757-899X/416/1/012028

Nowacki, J., Sajek, A., & Matkowski, P. (2016). The influence of welding heat input on the microstructure of joints of S1100QL steel in one-pass welding. Archives of Civil and Mechanical Engineering, 16(4), 777–783. https://doi.org/10.1016/j.acme.2016.05.001 DOI: https://doi.org/10.1016/j.acme.2016.05.001

Pańcikiewicz, K., Świerczyńska, A., Hućko, P., & Tumidajewicz, M. (2020). Laser Dissimilar Welding of AISI 430F and AISI 304 Stainless Steels. Materials, 13(20), 4540. https://doi.org/10.3390/ma13204540 DOI: https://doi.org/10.3390/ma13204540

Pezowicz, C., Szotek, S., Kobielarz, M., & Wudarczyk, S. (2016). Device for biaxial stretching of biological samples. PL412122 (A1), 2016-11-07, Wojewódzki Szpital Specjalistyczny We Wrocławiu.

Rout, M. (2020). Texture-tensile properties correlation of 304 austenitic stainless steel rolled with the change in rolling direction. Materials Research Express, 7(1), 016563. https://doi.org/10.1088/2053-1591/ab677c DOI: https://doi.org/10.1088/2053-1591/ab677c

Różyło, P., Wysmulski, P., & Falkowicz, K. (2017). Fem and Experimental Analysis of Thin-Walled Composite Elements Under Compression. International Journal of Applied Mechanics and Engineering, 22(2), 393–402. https://doi.org/10.1515/ijame-2017-0023 DOI: https://doi.org/10.1515/ijame-2017-0023

Rudawska, A., Zaleski, K., Miturska, I., & Skoczylas, A. (2019). Effect of the Application of Different Surface Treatment Methods on the Strength of Titanium Alloy Sheet Adhesive Lap Joints. Materials, 12(24), 4173. https://doi.org/10.3390/ma12244173 DOI: https://doi.org/10.3390/ma12244173

Sarre, B., Flouriot, S., Geandier, G., Panicaud, B., & de Rancourt, V. (2016). Mechanical behavior and fracture mechanisms of titanium alloy welded joints made by pulsed laser beam welding. Procedia Structural Integrity, 2, 3569–3576. https://doi.org/10.1016/j.prostr.2016.06.445 DOI: https://doi.org/10.1016/j.prostr.2016.06.445

Skowrońska, B., Chmielewski, T., Kulczyk, M., Skiba, J., & Przybysz, S. (2021). Microstructural Investigation of a Friction-Welded 316L Stainless Steel with Ultrafine-Grained Structure Obtained by Hydrostatic Extrusion. Materials, 14(6), 1537. https://doi.org/10.3390/ma14061537 DOI: https://doi.org/10.3390/ma14061537

Szala, M., Chocyk, D., Skic, A., Kamiński, M., Macek, W., & Turek, M. (2021). Effect of Nitrogen Ion Implantation on the Cavitation Erosion Resistance and Cobalt-Based Solid Solution Phase Transformations of HIPed Stellite 6. Materials, 14(9), 2324. https://doi.org/10.3390/ma14092324 DOI: https://doi.org/10.3390/ma14092324

Szala, M., & Łukasik, D. (2018). Pitting Corrosion of the Resistance Welding Joints of Stainless Steel Ventilation Grille Operated in Swimming Pool Environment. International Journal of Corrosion, 2018, 9408670. https://doi.org/10.1155/2018/9408670 DOI: https://doi.org/10.1155/2018/9408670

Szala, M., Sawa, M., & Walczak, M. (2021). Device for specimens uniaxially tensile strength tesitng (Urządzenie do statycznego, jednoosiowego rozciągania próbek) (Poland Patent Nr P.437489).

Szala, M., Szafran, M., Macek, W., Marchenko, S., & Hejwowski, T. (2019). Abrasion Resistance of S235, S355, C45, AISI 304 and Hardox 500 Steels with Usage of Garnet, Corundum and Carborundum Abrasives. Advances in Science and Technology. Research Journal, 13(4), 151–161. https://doi.org/10.12913/22998624/113244 DOI: https://doi.org/10.12913/22998624/113244

Szala, M., Winiarski, G., Wójcik, Ł., & Bulzak, T. (2020). Effect of Annealing Time and Temperature Parameters on the Microstructure, Hardness, and Strain-Hardening Coefficients of 42CrMo4 Steel. Materials, 13(9), 2022. https://doi.org/10.3390/ma13092022 DOI: https://doi.org/10.3390/ma13092022

Szklarek, K., & Gajewski, J. (2020). Optimisation of the Thin-Walled Composite Structures in Terms of Critical Buckling Force. Materials, 13(17), 3881. https://doi.org/10.3390/ma13173881 DOI: https://doi.org/10.3390/ma13173881

Świć, A., Gola, A., Sobaszek, Ł., & Orynycz, O. (2020). Control of Machining of Axisymmetric Low-Rigidity. Parts. Materials, 13(21), 5053. https://doi.org/10.3390/ma13215053 DOI: https://doi.org/10.3390/ma13215053

Zagórski, I., Kulisz, M., Kłonica, M., & Matuszak, J. (2019). Trochoidal Milling and Neural Networks Simulation of Magnesium Alloys. Materials, 12(13), 2070. https://doi.org/10.3390/ma12132070 DOI: https://doi.org/10.3390/ma12132070

Zheng, C., Liu, C., Ren, M., Jiang, H., & Li, L. (2018). Microstructure and mechanical behavior of an AISI 304 austenitic stainless steel prepared by cold- or cryogenic-rolling and annealing. Materials Science and Engineering: A, 724, 260–268. https://doi.org/10.1016/j.msea.2018.03.105 DOI: https://doi.org/10.1016/j.msea.2018.03.105

Żebrowski, R., Walczak, M., Korga, A., Iwan, M., & Szala, M. (2019). Effect of Shot Peening on the Mechanical Properties and Cytotoxicity Behaviour of Titanium Implants Produced by 3D Printing Technology. Journal of Healthcare Engineering, 2019, 8169538. https://doi.org/10.1155/2019/8169538 DOI: https://doi.org/10.1155/2019/8169538

Sawa, M., Szala, M., & Henzler, W. (2021). INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY. Applied Computer Science, 17(3), 92–105. https://doi.org/10.23743/acs-2021-24

Article Sidebar

Issue Vol. 17 No. 3 (2021)

Archives

Main Article Content

DOI

Authors

Abstract

Keywords:

References

Article Details

License