A SIMULATION EXPERIMENT AND MULTI-CRITERIA ASSESSMENT OF MANUFACTURING PROCESS FLOW VARIANTS TESTED ON A COMPUTER MODEL
Sławomir KUKLA
skukla@ath.bielsko.plDepartment of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała (Poland)
Marek SMETANA
Department of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, (Czechia)
Abstract
The article presents issues relating to designing and improvement of manufacturing processes based on a modelling and simulation method. The 3D model of a production line has been designed and simulation experiment, conducted on the Arena model prepared in a versatile package for modelling and simulation of manufacturing systems and representing functioning of the system, has been carried out. The results obtained from the experiment and analyses of time and ergonomics of work at a work station were subject to multi-criteria assessment based on a point-by-point method of assessment according to Yager.
Keywords:
computer model, simulation experiment, multi-criteria assessmentReferences
Dennis, P. (2016). Lean Production simplified. Boca Raton: CRC Press Taylor &Francis Group.
Google Scholar
Dima, I., Man, M. (2015). Modelling and simulation in management. Switzerland: Springer International Publishing.
DOI: https://doi.org/10.1007/978-3-319-16592-9
Google Scholar
Falzon, P. (2015). Constructive ergonomics. Boca Raton: CRC Press.
DOI: https://doi.org/10.1201/b17456
Google Scholar
Kelton, W. D., Sadowski, R. P., & Sturrock, D. T. (2007). Simulation with ARENA. New York: McGraw-Hill Inc.
Google Scholar
Kłos, S., Patalas-Maliszewska, J., & Trebuna, P. (2016). Improving manufacturing processes using simulation methods. Applied Computer Science, 12(4), 7–17.
Google Scholar
Kukla, S. (2014). Multi-criterion assessment of different variants of casts manufacturing processes. Archives of Foundry Engineering, 14(3), 47–50.
DOI: https://doi.org/10.2478/afe-2014-0060
Google Scholar
Kukla, S. (2016). Quality and safety assurance of iron casts and manufacturing processes. Archives of Foundry Engineering, 16(2), 17–20.
DOI: https://doi.org/10.1515/afe-2016-0019
Google Scholar
Maciąg, A., Piertroń, R., & Kukla, S. (2013). Prognozowanie i symulacja w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Manas, J. (2015). The resource management and capacity planning handbook. USA: McGraw-Hill Companies.
Google Scholar
Pisz, I., Sęk, T., & Zielecki, W. (2013). Logistyka w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Plinta, D. (2015). Modelowanie i symulacja procesów produkcyjnych. Bielsko-Biała: Wydawnictwo Naukowe Akademii Techniczno-Humanistycznej.
Google Scholar
Rainey, L. B., Tolk, A. (2015). Modeling and simulation support for system of systems engineering applications. New Jersey: John Wiley & Sons.
DOI: https://doi.org/10.1002/9781118501757
Google Scholar
Rossetti, M. D. (2016). Simulation modelling and Arena. New Jersey: John Wiley& Sons.
Google Scholar
Sobaszek, Ł., & Gola, A. (2015). Computer-aided production task scheduling. Applied Computer Science, 11(4), 58–69.
Google Scholar
Authors
Sławomir KUKLAskukla@ath.bielsko.pl
Department of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Marek SMETANADepartment of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, Czechia
Statistics
Abstract views: 314PDF downloads: 6
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Janani DEWMINI, W Madushan FERNANDO, Izabela Iwa NIELSEN, Grzegorz BOCEWICZ, Amila THIBBOTUWAWA, Zbigniew BANASZAK, IDENTIFYING THE POTENTIAL OF UNMANNED AERIAL VEHICLE ROUTING FOR BLOOD DISTRIBUTION IN EMERGENCY REQUESTS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Baldemar ZURITA, Luís LUNA, José HERNÁNDEZ, Federico RAMÍREZ, BOVW FOR CLASSIFICATION IN GEOMETRICS SHAPES , Applied Computer Science: Vol. 14 No. 4 (2018)
- Edyta ŁUKASIK, Emilia ŁABUĆ, ANALYSIS OF THE POSSIBILITY OF USING THE SINGULAR VALUE DECOMPOSITION IN IMAGE COMPRESSION , Applied Computer Science: Vol. 18 No. 4 (2022)
- Agnieszka ZACHCIAŁ, Andrzej JARDZIOCH, APPLICATION OF SIMULATION RESEARCH TO ANALYSE THE PRODUCTION PROCESS IN TERMS OF SUSTAINABLE DEVELOPMENT , Applied Computer Science: Vol. 18 No. 3 (2022)
- Nasir ALAWAD, Afaf ALSEADY, FUZZY CONTROLLER OF MODEL REDUCTION DISTILLATION COLUMN WITH MINIMAL RULES , Applied Computer Science: Vol. 16 No. 2 (2020)
- Daniel HALIKOWSKI, Justyna PATALAS-MALISZEWSKA, Małgorzata SKRZESZEWSKA, A MODEL FOR ASSESSING THE LEVEL OF AUTOMATION OF A MAINTENANCE DEPARTMENT USING ARTIFICIAL NEURAL NETWORK , Applied Computer Science: Vol. 14 No. 4 (2018)
- Łukasz WOJCIECHOWSKI, Tadeusz CISOWSKI, MODEL OF A COMPUTER SYSTEM FOR SELECTION OF OPERATING PARAMETERS FOR TRANSPORT VEHICLES IN THE ASPECT OF THEIR DURABILITY , Applied Computer Science: Vol. 14 No. 4 (2018)
- Marcin BADUROWICZ, DETECTION OF SOURCE CODE IN INTERNET TEXTS USING AUTOMATICALLY GENERATED MACHINE LEARNING MODELS , Applied Computer Science: Vol. 18 No. 1 (2022)
- Małgorzata ŚLIWA, Ewelina KOSICKA, A MODEL OF KNOWLEDGE ACQUISITION IN THE MAINTENANCE DEPARTMENT OF A PRODUCTION COMPANY , Applied Computer Science: Vol. 13 No. 3 (2017)
- Raphael Olufemi AKINYEDE, Temitayo Elijah BALOGUN, Abiodun Boluwade ROTIMI, Oluwasefunmi Busola FAMODIMU, A CUSTOMER-CENTRIC APPLICATION FOR A CINEMA HOUSE , Applied Computer Science: Vol. 16 No. 2 (2020)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
