PRODUCTION PLANNING IN CONDITIONS OF MASS CUSTOMIZATION BASED ON THEORY OF CONSTRAINTS
Janusz MLECZKO
jmleczko@ath.bielsko.pl*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała (Poland)
Paweł BOBIŃSKI
LiuGong Dressta Machinery, Stalowa Wola (Poland)
Abstract
In accordance with the requirements of the modern market, small and medium-sized enterprises (SMEs) need to offer a wide range of products tailored to the specific and individual requirements. The success of many enterprises, which work in mass production system and use economic effect of scale production slowly is a thing of the past. There are many enterprises, generally small and medium manufacturing in unit and small batch production, for which it is necessary to develop optimal methods of production planning, taking into account the flexible production requirements, matched to the time-varying customer’s demand. The article presents the production planning based on TOC in conditions of mass customization. Presented solutions are used in modern practice.
Keywords:
mass customization, computer aided planning, TOCReferences
Da Silveira, G., Borenstein, D., & Fogliatto, F. S. (2001). Mass customization: Literature review and research directions. Int. J. Production Economics, 72, 1–13. https://doi.org/10.1016/ S0925-5273(00)00079-7
DOI: https://doi.org/10.1016/S0925-5273(00)00079-7
Google Scholar
Fogliatto, F., Da Silveira, G. & Borenstein. D. (2012). The mass customization decade: An updated review of the literature. International Journal of Production Economics, 138, 14–25. https://doi.org/10.1016/ j.ijpe.2012.03.002
DOI: https://doi.org/10.1016/j.ijpe.2012.03.002
Google Scholar
Haug, A., Ladeby, K., & Edwards, K. (2009). From engineer‐ to‐ order to mass customization. Management Research News, 32(7), 633–644. https://doi.org/10.1108/01409170910965233
DOI: https://doi.org/10.1108/01409170910965233
Google Scholar
Kumar, A., (2007). Mass customization: manufacturing issues and taxonomic analyses. Int. J. Flex. Manuf. Syst., 19, 625–629. https://doi.org/10.1007/s10696-008-9049-5
DOI: https://doi.org/10.1007/s10696-008-9049-5
Google Scholar
Luo, X., Tu, Y., Tang, J., & Kwong, C. K., (2008). Optimizing customer’s selection for configurable product in B2C e-commerce application. Computers in Industry, 59, 767–776. https://doi.org/10.1016/j.compind.2008.03.003
DOI: https://doi.org/10.1016/j.compind.2008.03.003
Google Scholar
Mleczko, J., (2014). Manufacturing processes creating with use of dynamic classification in conditions of unit and small-batch production. Bielsko-Biała: Publishing House of University of Bielsko-Biała.
Google Scholar
Peng, D. G., Heim, G. (2011). Impacts of information technology on mass customization capability of manufacturing plants. International Journal of Operations& Production Management, 31(10), 1022–1047. https://doi.org/10.1108/01443571111182173
DOI: https://doi.org/10.1108/01443571111182173
Google Scholar
Tien, J. M., (2011). Manufacturing and services: From mass production to mass customization. Journal of Systems Science and Systems Engineering, 20(2), 129-154. https://doi.org/10.1007/s11518-011-5166-x
DOI: https://doi.org/10.1007/s11518-011-5166-x
Google Scholar
Authors
Janusz MLECZKOjmleczko@ath.bielsko.pl
*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała Poland
Authors
Paweł BOBIŃSKILiuGong Dressta Machinery, Stalowa Wola Poland
Statistics
Abstract views: 196PDF downloads: 53
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
Similar Articles
- Kusay F. AL-TABATABAIE, Sadeer D. ABDULAMEER, APPLYING ARDUINO FOR CONTROLLING CAR PARKING SYSTEM , Applied Computer Science: Vol. 15 No. 2 (2019)
- Nancy WOODS, Charles ROBERT, ENCAPSULATION OF IMAGE METADATA FOR EASE OF RETRIEVAL AND MOBILITY , Applied Computer Science: Vol. 15 No. 1 (2019)
- Lubna RIYAZ, Muheet Ahmed BUTT, Majid ZAMAN, IMPROVING CORONARY HEART DISEASE PREDICTION BY OUTLIER ELIMINATION , Applied Computer Science: Vol. 18 No. 1 (2022)
- Andrij MILENIN, PARALLEL SOLUTION OF THERMOMECHANICAL INVERSE PROBLEMS FOR LASER DIELESS DRAWING OF ULTRA-THIN WIRE , Applied Computer Science: Vol. 18 No. 3 (2022)
- Jarosław GIL, Andrzej POLAŃSKI, APPLICATION OF GILLESPIE ALGORITHM FOR SIMULATING EVOLUTION OF FITNESS OF MICROBIAL POPULATION , Applied Computer Science: Vol. 18 No. 4 (2022)
- Kuppan Chetty RAMANATHAN, Manju MOHAN, Joshuva AROCKIA DHANRAJ, BACKWARD MOTION PLANNING AND CONTROL OF MULTIPLE MOBILE ROBOTS MOVING IN TIGHTLY COUPLED FORMATIONS , Applied Computer Science: Vol. 17 No. 3 (2021)
- Muaayed F. AL-RAWI, CONVENTIONAL ENERGY EFFICIENT ROUTING PROTOCOLS IN WIRELESS SENSOR NETWORKS , Applied Computer Science: Vol. 16 No. 3 (2020)
- Lucian LUPŞA-TĂTARU, CUSTOMIZING AUDIO FADES WITH A VIEW TO REAL-TIME PROCESSING , Applied Computer Science: Vol. 15 No. 4 (2019)
- Robert KARPIŃSKI, Józef JONAK, Jacek MAKSYMIUK, MEDICAL IMAGING AND 3D RECONSTRUCTION FOR OBTAINING THE GEOMETRICAL AND PHYSICAL MODEL OF A CONGENITAL BILATERAL RADIO-ULNAR SYNOSTOSIS , Applied Computer Science: Vol. 14 No. 1 (2018)
- Lucian LUPŞA-TĂTARU, NOVEL TECHNIQUE OF CUSTOMIZING THE AUDIO FADE-OUT SHAPE , Applied Computer Science: Vol. 14 No. 3 (2018)
<< < 4 5 6 7 8 9 10 11 12 13 > >>
You may also start an advanced similarity search for this article.
