Large-panel buildings after years of exploitation. Selected problems of repairs
Article Sidebar
Open full text
Published:
Sep 11, 2014
Issue Vol. 13 No. 3 (2014)
Articles
-
Operational phase problems of prefabricated residential buildings on the example of the objects in the Lublin region
007-014
-
Large-panel buildings after years of exploitation. Selected problems of repairs
015-025
-
Prognosis of the technical condition of masonry walls in residential buildings
027-032
-
Geometric shaping of chosen two-layered bar domes
033-040
-
The program of renovation work on the example of the system building constructionW-70
041-048
-
Operating problems of buildings erected by using OWT large panel technology on the example of a ten-storey residential building in Rzeszów
049-056
-
Evaluation of prefabricated blocks of flats through the Real estate market point of view
057-064
-
Investigation of the bearing capacity of reinforced concrete beams strengthened with reinforced concrete ring under load
065-070
-
Flexural strengthening of RC beams by using a near surface mounted T-section profiles
071-078
-
A load capacity of cyclic loaded reinforced concrete beams
079-086
-
An analysis of the influence of the reinforcing bar distribution on the beam deformation during loading
087-094
-
Influence of the interface location at the height of composite reinforced concrete elements on the interface crack limit state
095-102
-
Experimental verification of numerical model of integral bridge
103-110
-
Comments concerning crack width calculation in joints of steel-concrete composite slabs
111-118
-
Methods of analysis of a reinforced concrete section under bending with axial force in the post-yield range
119-126
-
Crack morphology and load carrying capacity of the deep beams reinforced orthogonally
127-134
-
Transverse reinforcement contribution in shear – remarks from experimental research
135-142
-
Research on anchorages of the structural strengthening system with prestressed CFRP strips
143-150
-
The influence of longitudinal reinforcement on shear capacity of reinforced concrete members without shear reinforcement
151-158
-
Experimental tests of post-tensioned girders strengthened with prestressed CFRP composites
159-166
-
Composite GFRP bars as reinforcement of concrete members under axial force and bending moment
167-174
-
Experimental investigations of reinforced concrete columns in the edge connection zone with a reinforced concrete slab
175-182
-
Punching shear behavior of thick reinforced concrete slabs according to Strut-and-Tie model
183-192
-
Experimental investigations of punching shear concrete slabs with different types of transverse reinforcement
193-200
-
On assessment of cracking of concrete beams reinforced with BFRP bars
201-208
-
Corrugated sheet as a bracing of flat truss chords at their out-plane buckling
209-218
-
Most adverse geometrical imperfections of steel spherical shells
219-226
-
Partial resistance factors of class 4 steel elements
227-234
-
Calculation of column bases under biaxial bending
235-242
-
Energy–active expansion segments of steel halls covered with a regular structure with a tie
243-250
-
The axial force influence on the flexibility of steel joints subject to bending under fully developed fire conditions
251-258
-
The study of the influence of initial mast shaft imperfections on the values of internal forces and the effort of mast structure
259-266
-
Parametric study on the rotation capacity of stiffened end-plate beam-to-column connection
267-274
-
Aerodynamic damping in the structural analysis of steel lattice towers
275-282
-
Structural robustness of steel framed buildings subjected to accidental actions
283-290
-
Buckling of elastically restrained cantilever wall with free edge stiffening
291-298
-
Buildings constructed in the system OWT- 67 in urban layout of residential settlement "Maki" in Lublin
299-309
-
The concept of housing estate A, B, and C in the borough of Felin District in Lublin and its implementation. Panel buildings and problems they pose
309-316
-
End-user survey results as contribution to energy performance assessment of precast panel housing stock
317-324
-
The cultural values of architectural form in terms of current conditions of building technologies including prefabricated buildings
325-332
-
Transform, but how?
333-340
-
Revitalization of prefabricated housing. Implementation of European solutions to Polish conditions
341-348
-
Revitalization of prefabricated estate in Lipsko - complement the function of the multi-purpose building
349-354
Main Article Content
DOI
Authors
Abstract
In the paper there are presented problems of repairs for existing large-panel buildings within the light of: damage of joints between load-bearing and façade walls, structural requirements for functional modernization, damage of layer joints in load-bearing and façade three-layer walls, new repair questions within the aspect of executed buildings’ thermal modernization.
Keywords:
large-panel building, repair works
Article Details
Ligęza, W. (2014) “Large-panel buildings after years of exploitation. Selected problems of repairs”, Budownictwo i Architektura / Civil and Architectural Engineering, 13(3), pp. 015–025. doi: 10.35784/bud-arch.1759.
