Model tests in wind tunnel of correct work of chimneys and ventilations draughts for a building in compact development
Andrzej Flaga
Wind Engineering Laboratory of the Cracow University of Technology (Poland)
https://orcid.org/0000-0003-1759-4872
Grzegorz Bosak
Wind Engineering Laborator; Department of Structural Mechanics; Faculty of Civil Engineering; Cracow University of Technology (Poland)
https://orcid.org/0000-0003-2127-3799
Renata Kłaput
Wind Engineering Laboratory; Cracow University of Technology (Poland)
https://orcid.org/0000-0002-2631-1937
Łukasz Flaga
Department of Building Structures; Faculty of Civil Engineering and Architecture; Lublin University of Technology (Poland)
https://orcid.org/0000-0001-9650-4913
Abstract
The paper deals with model investigations on wind pressure distributions on walls and roof of a tenement house in compact development of Cracow centre. The tests were performed in a boundary layer wind tunnel at the Cracow University of Technology for eight wind directions. Two situations were tested: 1. Before realization of a superstructure on the adjacent building; 2. After realization of the superstructure. Investigations results were used for evaluation of correct work of chimneys and ventilations draughts of the building.
Keywords:
model tests, wind tunnel, chimneys and ventilations draughtsReferences
Raport z badań: Badania modelowe w tunelu aerodynamicznym prawidłowości działania ciągów kominowych i wentylacyjnych w budynku przy ul. Św. Gertrudy 8 w Krakowie w dwóch stanach dachu budynku sąsiedniego przy ul. Św. Gertrudy 7: przed wykonaniem nadbudowy i po wykonaniu nadbudowy. Politechnika Krakowska, Kraków 2013.
Google Scholar
Flaga A.: Inżynieria wiatrowa. Arkady, Warszawa.
Google Scholar
PN-89/B/10425 Przewody dymowe, spalinowe i wentylacyjne murowane z cegły, wymagania techniczne i badania przy odbiorze;
Google Scholar
PN-EN 15287-1 Kominy – Projektowanie, instalowanie, przekazywanie do eksploatacji. – Część 2: kominy przeznaczone do urządzeń grzewczych z otwartą komorą spalania;
Google Scholar
PN-EN 15287-2 Kominy – Projektowanie, instalowanie, przekazywanie do eksploatacji. – Część 2: kominy przeznaczone do urządzeń grzewczych z zamkniętą komorą spalania.
Google Scholar
Authors
Andrzej FlagaWind Engineering Laboratory of the Cracow University of Technology Poland
https://orcid.org/0000-0003-1759-4872
Authors
Grzegorz BosakWind Engineering Laborator; Department of Structural Mechanics; Faculty of Civil Engineering; Cracow University of Technology Poland
https://orcid.org/0000-0003-2127-3799
Authors
Renata KłaputWind Engineering Laboratory; Cracow University of Technology Poland
https://orcid.org/0000-0002-2631-1937
Authors
Łukasz FlagaDepartment of Building Structures; Faculty of Civil Engineering and Architecture; Lublin University of Technology Poland
https://orcid.org/0000-0001-9650-4913
Statistics
Abstract views: 152PDF downloads: 105
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.
