Strength properties of high-performance concretes with carbonate coarse aggregate
Jacek Góra
Department of General Construction; Faculty of Civil Engineering and Architecture; Lublin University of Technology (Poland)
https://orcid.org/0000-0001-6054-7882
Abstract
High performance concretes were tested to find an effect of the three different coarse aggregates (basalt, granite and dolomite) on concrete strength properties. All the results were analyzed statistically. Splitting tensile strength of high performance concrete with dolomite aggregate was significantly higher than that of concretes with basalt and granite aggregate. The effect of dolomite aggregate on compressive strength of HPC was much more advantageous than that of granite aggregate.
Keywords:
high performance concrete, carbonate crushed aggregate, compressive strength, tensile strength, one-way ANOVA, LSD testReferences
Hobbs D.W., Alkali-silica reaction in concrete, Thomas Telford Ltd., London 1988.
DOI: https://doi.org/10.1680/aric.13179
Google Scholar
Hooton R.D., Permeability and pore structure of cement pastes containing fly ash, slag and silica fume, ASTM Symposium, Denver 1984.
Google Scholar
Piasta J., Badanie kruszyw węglanowych z województwa kieleckiego i ich zastosowanie do betonów konstrukcyjnych, praca doktorska, Politechnika Warszawska, Warszawa 1971.
Google Scholar
Piasta J., Zachowanie się kruszyw węglanowych w betonach z cementami o różnej zawartości alkaliów, Zeszyty Naukowe Politechniki Świętokrzyskiej B-8, Kielce 1980.
Google Scholar
Barnes B.D., Diamond S., Dilch W.L., Micromorphology of the interfacial zone around aggregates in portland cement mortar, Journal American Ceramic Society, Vol. 62/1979.
DOI: https://doi.org/10.1111/j.1151-2916.1979.tb18797.x
Google Scholar
Maso J.C., Interfacial transition zone in concrete, RILEM Report 11, E & FN Spon, London 1996.
DOI: https://doi.org/10.1201/9781482271560
Google Scholar
Roy D.M., Jiong W., 9th International Congress on the Chemistry of Cement, Vol. 6, Poster Session, New Delhi 1992.
Google Scholar
PN-EN 206-1:2003 Beton. Część 1: Wymagania, właściwości, produkcja i zgodność.
Google Scholar
Sheskin D.J., Handbook of parametric and nonparametric statistical procedures, CRC Press 1997.
DOI: https://doi.org/10.4324/9780203489536
Google Scholar
Kucharska L., W/C - wskaźnik wpływu warstwy przejściowej na właściwości mechaniczne betonów zwykłych i WWB i ich podziału, Cement-Wapno-Beton nr 2/99.
Google Scholar
Zimbelmann R., A contribution to the problem of cement-aggregate bond, Cement and Concrete Research, Vol. 15/1985.
DOI: https://doi.org/10.1016/0008-8846(85)90146-2
Google Scholar
Grandet J., Ollivier J.P., Orientation des hydrates au contact des granulates, 7th International Congress on the Chemistry of Cement, Paris 1980.
Google Scholar
Alexander M.G., Fracture energies of interfaces between cement paste and rock, and application to the engineering behaviour of concrete, Proceedings International RILEM Conference, Noordwijk, Netherlands, E & FN Spon, London 1991.
Google Scholar
Farran J., Contribution mineralogique a l’etude de l’adhevence entre les constituants hydrates des ciments et les materiaux associes, Review Materials Constr. Travaux Publies, No. 490-491, 492/1956.
Google Scholar
Roy D.M., Langton C.A., Morphology and Microstructure of Cement Paste-Rock Interfacial Regions, 7th International Congress on the Chemistry of Cement, Paris 1980.
Google Scholar
PN-EN 1992-1-1:2008 Eurokod 2. Projektowanie konstrukcji z betonu. Część 1-1: Reguły ogólne i reguły dla budynków.
Google Scholar
Authors
Jacek GóraDepartment of General Construction; Faculty of Civil Engineering and Architecture; Lublin University of Technology Poland
https://orcid.org/0000-0001-6054-7882
Statistics
Abstract views: 203PDF downloads: 99
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.