On assessment of cracking of concrete beams reinforced with BFRP bars
Marek Urbański
Institute of Building Engineering; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
https://orcid.org/0000-0002-3568-6888
Andrzej Łapko
Chair of Building Structures; Faculty of Civil & Environment Engineering; Bialystok University of Technology (Poland)
Abstract
This paper presents a comparative analysis of experimental and theoretical crack widths of simply supported beams reinforced with BFRP rebar (Basalt Fiber Reinforced Polymers). The tested BFRC model beams have been made of concrete class C30/37 and of bottom flexural basalt bars 8 mm in diameter. The reference RC beams with traditional flexural steel reinforcement have been additionally made of the same diameter. Beam deflections, concrete crack widths and strength capacity of beams reinforced with BFRP bars as well as with traditional steel bars have been registered. It has been shown that crack widths of beams reinforced with BFRP bars have been much (three to four times) higher than in the beams reinforced traditionally.
Keywords:
BFRP, cross-sectional stiffness, concrete, basalt bars, cracking behaviorReferences
ACI 440.1R-06. 2006. Guide for the Design and Construction of Concrete Reinforced with FRP Bars. ACI Committee 440, American Concrete Institute, USA.
Google Scholar
Bank Lawrence C., Progressive Failure of FRP Composites for Construction, 13-15 June, CICE2012, Rome 2012, 10 pp.
Google Scholar
Wu Zhishen, Wang Xin, Wu Gang, 2012. Advancement of Structural Safety and Sustainability with Basalt Fiber Reinforced Polymers, 13-15 June, CICE2012, Rome 2012, 29 pp.
Google Scholar
Urbanski M., Lapko A., Garbacz A.: Investigation on Concrete Beams Reinforced with Basalt Rebars as an Effective Alternative of Conventional R/C Structures. Procedia Engineering, Elsevier, Science Direct, Volume 57, May 2013, 1183-1191.
DOI: https://doi.org/10.1016/j.proeng.2013.04.149
Google Scholar
Branson, D.E. Deformation of concrete structures. New York Mc Graw-Hill, 1997.
Google Scholar
fib Bulletin 40/2007, FRP reinforcement in RC structures, technical report. International Federation for Structural Concrete (fib), September 2007.
Google Scholar
Borosnyoi A. Serviceability of CFRP prestressed concrete beams. Budapest 2002.
Google Scholar
Eurokod 2, PN-EN 1992-1-1: Projektowanie konstrukcji z betonu - Część 1-1: Reguły ogólne i reguły dla budynków. PKN Warszawa 2008.
Google Scholar
ACI 318-08. 2008. Building Code Requirements for Rein-forced Concrete. ACI Committee 318, American Concrete Institute, Detroit, Michigan.
Google Scholar
ISIS Canada. 2007. Reinforcing concrete structures with fiber reinforced polymers. Design manual Nº 3 Version 2, Manitoba, Canada ISIS Canada Corporation.
Google Scholar
Gergely P. Lutz L. Maximum Crack Width in Reinforced Flexural Members, ACI SP-20, Causes, Mechanism and Control of Cracking in Concrete,(1968), 87-117.
Google Scholar
JSCE 1997 “Recommendation for Design and Construction and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials”, Edited by Machida, Vol.23 JSCE, Tokyo,1997.
Google Scholar
Authors
Marek UrbańskiInstitute of Building Engineering; Faculty of Civil Engineering; Warsaw University of Technology Poland
https://orcid.org/0000-0002-3568-6888
Authors
Andrzej ŁapkoChair of Building Structures; Faculty of Civil & Environment Engineering; Bialystok University of Technology Poland
Statistics
Abstract views: 165PDF downloads: 118
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.
