A study on propagation of elastic waves in steel bolted joints
Magdalena Rucka
Department of Structural Mechanics and Bridge Structures; Faculty of Civil and Environmental Engineering; Gdansk University of Technology (Poland)
https://orcid.org/0000-0001-7870-281X
Rafał Kędra
Department of Structural Mechanics and Bridge Structures; Faculty of Civil and Environmental Engineering; Gdansk University of Technology (Poland)
https://orcid.org/0000-0002-8614-3365
Abstract
The paper presents experimental and numerical analysis of elastic waves propagation in bolted connection of two steel plates. Numerical calculations were carried out using finite element method in two stages. In the first stage, static behavior of the joint during bolts compression was analyzed. Results of static analysis were used to formulate contact conditions for dynamic models. The analysis of wave propagation was taken for four types of bolt connection model. Finally, experimental tests by using a laser vibrometer and piezoelectric actuator were made in order to validate finite element models.
Keywords:
wave propagation, nodes of steel structures, bolted joints, FEM calculations, experimental investigationsReferences
Filipowicz A., Łubiński M., Żółtowski W. Konstrukcje metalowe. Część I. Podstawy projektowania. Wydawnictwo Arkady, 2003.
Google Scholar
Rucka M. Experimental and numerical study on damage detection in an L-joint using guided wave propagation. Journal of Sound and Vibration 329 (2010) 1760–1779.
DOI: https://doi.org/10.1016/j.jsv.2009.12.004
Google Scholar
Moser F., Jacobs L. J., Qu J. Modeling elastic wave propagation in waveguides with the finite element method. NDT&E International 32 (1999) 225–234.
Google Scholar
Chróścielewski J., Rucka M., Wilde K., Witkowski W. Zastosowanie metody elementów spektralnych do modelowania zjawisk propagacji fal sprężystych dla celów diagnostyki, 56 Konferencja Naukowa KILiW PAN oraz KN PZITB, Kielce- Krynica, 2010, s. 821–828.
Google Scholar
Peng H., Meng G., Li F. Modeling of wave propagation in plate structures using three-dimensional spectral element method for damage detection. Journal of Sound and Vibration 320 (2009) 942–954.
Google Scholar
Rose J. L. Ultrasonic Waves in Solid Media. Cambridge University Press, 1999.
Google Scholar
Kang S.B., Kim J., Yoon C.J. Finite element analysis and modeling of structure with bolted joints. Applied Mathematical Modelling 31 (2007) 895–911.
Google Scholar
Montgomery J. Methods for modeling bolts in the bolted joint. ANSYS User’s Conference 2002.
Google Scholar
Authors
Magdalena RuckaDepartment of Structural Mechanics and Bridge Structures; Faculty of Civil and Environmental Engineering; Gdansk University of Technology Poland
https://orcid.org/0000-0001-7870-281X
Authors
Rafał KędraDepartment of Structural Mechanics and Bridge Structures; Faculty of Civil and Environmental Engineering; Gdansk University of Technology Poland
https://orcid.org/0000-0002-8614-3365
Statistics
Abstract views: 192PDF downloads: 121
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.
