Physical and mechanical properties keramsite obtained with added glauconite
Małgorzata Franus
Department of Geotechnics; Faculty of Civil Engineering and Architecture; Lublin University of Technology (Poland)
https://orcid.org/0000-0003-2317-4196
Abstract
This paper presents the assessment of the physical and mechanical properties lightweight of aggregate obtained from the addition of expanded clay mineral clay – glauconite and clay from the bed, “Buda Mszczonowska”. Crushed plastic was prepared by firing at a temperature of over 1170 ° C. Evaluation of physical parameters was based on parameters such as density, bulk density and bulk density, tightness, porosity, water absorption. The study of mechanical properties was carried out on the basis of aggregate hardiness, resistance to crushing, abrasion in the drum Los Angeles. In addition, the compounds were determined in the aggregate coloring. Use glauconite in the lightweight of aggregate is beneficial for the texture of the sinter resulting in the formation of a glassy layer on the surface of the granules, and by increasing their porosity. Investigated the properties indicate that the resulting lightweight of aggregate with glauconite meets the basic requirements for materials used in construction.
Keywords:
lightweight of aggregate, glauconite, physical and mechanical properties lightweight of aggregatesReferences
Franus M., Zastosowanie glaukonitu do usuwania śladowych ilości metali ciężkich, Politechnika Lubelskia, 2010.
Google Scholar
Keramzyt w Geotechnice, Weber Leca.
Google Scholar
Krzowski Z., Glaukonit z osadów trzeciorzędowych region lubelskiego i możliwości jego wykorzystania do analiz geochronologicznych, Politechnika Lubelska, 1995.
Google Scholar
PN-76/B-06714/03: Kruszywa mineralne. Badania. Oznaczanie gęstości w piknometrze.
Google Scholar
PN-76/B-06714/05: Kruszywa mineralne. Badania. Oznaczenie gęstości pozornej na wadze hydrostatycznej.
Google Scholar
PN-76/B-06714/08 Kruszywa mineralne. Badania. Oznaczanie szczelności.
Google Scholar
PN-76/B-06714/09: Kruszywa mineralne. Badania. Oznaczanie porowatości.
Google Scholar
PN-76/B-06714/10: Kruszywa mineralne. Badania. Oznaczanie jamistości.
Google Scholar
PN-77/B-06714/07: Kruszywa mineralne. Badania. Oznaczanie gęstości nasypowej.
Google Scholar
PN-77/B-06714/18: Kruszywa mineralne. Badania. Oznaczanie nasiąkliwości.
Google Scholar
PN-78/B-06714/40: Kruszywa mineralne. Badania. Oznaczanie wytrzymałości na miażdżenie.
Google Scholar
PN-79/B-06714/42: Kruszywa mineralne. Badania. Oznaczanie ścieralności w bębnie Los Angeles.
Google Scholar
PN-86/B-06712: Kruszywa mineralne do betonu.
Google Scholar
PN-86/B-23006: Kruszywa do betonu lekkiego.
Google Scholar
PN-88/B-06714/36: Kruszywa mineralne. Badania. Oznaczanie związków barwiących.
Google Scholar
PN-92/B-06712: Wypełnienia lekkie złóż biologicznych do oczyszczania ścieków.
Google Scholar
PN-96/B-11111: Kruszywa mineralne. Kruszywa naturalne do nawierzchni drogowych; Żwir i mieszanka.
Google Scholar
PN-96/B-11112: Kruszywa mineralne. Kruszywa łamane do nawierzchni drogowych.
Google Scholar
PN-97/S-06102: Drogi samochodowe. Podbudowy z kruszyw stabilizowanych mechanicznie.
Google Scholar
PN-98/S-02205: Drogi samochodowe. Roboty ziemne. Wymagania i badania.
Google Scholar
PN-EN 12620:2004: Kruszywa do betonu.
Google Scholar
PN-EN 13055-1:2002: Kruszywa lekkie. Część 1: Kruszywa do betonu, zaprawy i rzadkiej zaprawy. Załącznik C: Oznaczanie mrozoodporności kruszyw lekkich.
Google Scholar
Authors
Małgorzata FranusDepartment of Geotechnics; Faculty of Civil Engineering and Architecture; Lublin University of Technology Poland
https://orcid.org/0000-0003-2317-4196
Statistics
Abstract views: 292PDF downloads: 121
License
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.