Publikowanie artykułów jest możliwe po podpisaniu zgody na przeniesienie licencji na czasopismo.
The paper describes the research on the method of production of granulated phase-change materials (PCM) used in construction industry for the accumulation of thermal energy. As mineral materials for the granules preparation zeolite from fly ash Na-P1 and natural diatomite dust were used which were impregnated with paraffinic filtration waste and granulated using a combined granulation method. Obtained granules were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherm, and differential scanning calorimetry (DSC). Mechanical strength of the materials was determined in a “drop strength” test. Performed analyses revealed that mineral composition and micromorphology of the diatomite and zeolite granules were varied, with zeolite granules having higher mechanical strength.
Bendkowska W., Kudrys J., “Thermal insulation of apparel textiles with PCM”, in: International Symposium Avantex, Frankfurt am Main, 27-29.11.2000.
Google Scholar
Li L. Yu H., Liu R.,. "Research on composite-phase change materials (PCMs)-bricks in the west wall of room-scale cubicle: Mid-season and summer day cases", Building and Environment, vol. 123, (2017), pp. 494–503. https://doi.org/10.1016/J.BUILDENV.2017.07.019
DOI: https://doi.org/10.1016/j.buildenv.2017.07.019
Google Scholar
Shobo A.B., Mawire A., Aucamp M., "Rapid thermal cycling of three phase change materials (PCMs) for cooking applications", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, (2018), pp. 329–341. https://doi.org/10.1007/s40430-018-1253-y
DOI: https://doi.org/10.1007/s40430-018-1253-y
Google Scholar
Jeong Y.-G., Park K.-B., Lee H.-S., "An Experimental Study on the Thermal Performance of Cement Mortar with Granulated PCM", Journal of the Korea Institute of Building Construction, vol. 12, no. 5, (2012) pp. 548 - 557. https://doi.org/10.5345/JKIBC.2012.12.5.548
DOI: https://doi.org/10.5345/JKIBC.2012.12.5.548
Google Scholar
da Cunha J.M.P., and Eames P. "Thermal energy storage for low and medium temperature applications using phase change materials –A review", Applied Energy, vol. 177, (2016), pp. 227–238. https://doi.org/10.1016/j.apenergy.2016.05.097
DOI: https://doi.org/10.1016/j.apenergy.2016.05.097
Google Scholar
Zhang Y., Zhou G., Lin K., Zhang Q., Di H., "Application of latent heat thermal energy storage in buildings: State-of the art and outlook", Building and Environment, vol. 42, (2007), pp. 2197–2209. https://doi.org/10.1016/j.buildenv.2006.07.023
DOI: https://doi.org/10.1016/j.buildenv.2006.07.023
Google Scholar
Mehling H., Cabeza L.F., "Heat and cold storage with PCM. An up to date introduction into basics and applications". Berlin: Springer-Verlag, 2008. https://doi.org/10.1007/978-3-540-68557-9
DOI: https://doi.org/10.1007/978-3-540-68557-9
Google Scholar
Rumpf H., "The strength of granules and agglomerates", in Aggromeration, Interscience, Kneper W.A. (ed), New York: John Wiley, 1962, pp. 379-414.
Google Scholar
Sterczyńska A., Deryło-Marczewska A., Sliwinska-Bartkowiak M. Piotrowska J.Z., Jarek M., Domin K., "Phase transitions of octamethylcyclotetrasiloxane confined inside aluminosilicate and silicate nanoporous matrices", Journal of Thermal Analysis and Calorimetry, vol. 118, no. 1, (2014), pp. 263-276. https://doi.org/10.1007/s10973-014-4008-8
DOI: https://doi.org/10.1007/s10973-014-4008-8
Google Scholar
Ramakrishnan S., Sanjayan J., Wang X., Alam M., Wilson J.L., "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites", Applied Energy, vol. 157, (2015), pp. 85-94. http://dx.doi.org/10.1016/j.apenergy.2015.08.019
DOI: https://doi.org/10.1016/j.apenergy.2015.08.019
Google Scholar
Sobolčiak P., Mustapha, K., Krupa I., AlMa'adeed, M., "Storage and Release of Thermal Energy of Phase Change Materials Based on Linear Low Density of Polyethylene, Parafin Wax and Expanded Graphite", in Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015, pp. 395-402. https://doi.org/10.1002/9781119090427.ch41
DOI: https://doi.org/10.1002/9781119090427.ch41
Google Scholar
Wang L.L., Tianbo Z., Yang L., Hongjing D., "Method for Control of Particle Size and Morphology of Paraffin/Polystyrene-Divinylbenzene Microcapsules", China Petroleum Processing and Petrochemical Technology, vol. 18, (2016), pp. 73–82.
Google Scholar
Mitran R.A., Berger D., Matei C., "Phase Change Materials Based On Mesoporous Silica", Current Organic Chemistry, vol. 22, no. 27, (2018), pp. 1-45. https://doi.org/10.2174/1385272822666180827125651
DOI: https://doi.org/10.2174/1385272822666180827125651
Google Scholar
Kunecki P., Panek R., Wdowin M., Bień T., Franus W., "Influence of the fly ash fraction after grinding process on the hydrothermal synthesis efficiency of Na-A, Na-P1, Na-X and sodalite zeolite types", International Journal of Coal Science & Technology, vol. 8, (2021), pp. 291-311. https://doi.org/10.1007/s40789-020-00332-1
DOI: https://doi.org/10.1007/s40789-020-00332-1
Google Scholar
Utwór dostępny jest na licencji Creative Commons Uznanie autorstwa – Na tych samych warunkach 4.0 Miedzynarodowe.
Publikowanie artykułów jest możliwe po podpisaniu zgody na przeniesienie licencji na czasopismo.