Publikowanie artykułów jest możliwe po podpisaniu zgody na przeniesienie licencji na czasopismo.
Application of sawdust concrete in construction
Oliwia Kropidłowska
o.kropidlowska@gmail.comWydział Budownictwa Lądowego i Wodnego; Politechnika Wrocławska; (Polska)
https://orcid.org/0000-0003-2978-2838
Abstrakt
Sawdust concrete is a type of lightweight concrete in which some of the mineral aggregate is replaced by sawdust - a by-product of wood processing. It is not a new material, but its potential is not utilised to its full degree. Taking into account the most important advantages of sawdust concrete - lower density and greater thermal and acoustic insulation than ordinary concrete - it is worth to consider the possibilities of its usage in construction wider than currently . In order to present the properties of sawdust concrete, the review of contemporary technical literature has been performed.
For the production of sawdust concretes mineralized sawdust from various types of trees, ordinary cements, mineral aggregates and water, are used. The usage of additives and admixtures is also allowed. The properties of the finished sawdust concrete are mainly influenced by the proportion of its components, especially the amount of fine aggregates replaced by sawdust. The construction products made of sawdust concrete are characterized by a low coefficient of thermal conductivity λ and soundproofing properties. In bending tests, a simply supported sawdust concrete beam behaves similar to a regular concrete beam, cracks first appear in the tension zone. Tensile strength, compressive strength and Young's modulus of sawdust concrete products depend on the proportion of components and the method of sawdust preparation before applying in the sawdust concrete-mix. Compared to ordinary concrete, the obtained values for sawdust concrete are lower, but partially fall within the ranges for the lower classes of ordinary concrete.
There are several possible applications of sawdust concrete in construction. One of the perspectives is to use it to build walls in buildings that require soundproofing between rooms, or to replace wood with it when renovating old buildings. However, further tests of sawdust concrete are needed in terms of the most favourable composition for its mechanical properties, and to define the standards according to which sawdust concrete elements should be produced.
Instytucje finansujące
The research has been carried out within the framework of the Operational Program Knowledge Education Development, Ministry of Science and Higher Education, Poland.
Słowa kluczowe:
concrete, sawdust, sawdust concrete, construction, green buildingBibliografia
Li M., Khelifa M., El Ganaoui M., “Mechanical characterization of concrete containing wood shavings as aggregates”, International Journal of Sustainable Built Environment, vol 6, 2017, pp. 587-596. https://doi.org/10.1016/j.ijsbe.2017.12.005
DOI: https://doi.org/10.1016/j.ijsbe.2017.12.005
Google Scholar
Bashar S. Mohamed, Abdullahi M., Hoong C.K. “Statistical Models for concrete containing wood chipping as partial replacement to fine aggregate”, Construction and Building Materials, vol 55, 2014, pp. 13-19. https://doi.org/10.1016/j.conbuildmat.2014.01.021
DOI: https://doi.org/10.1016/j.conbuildmat.2014.01.021
Google Scholar
Bederina M., Laidoudi B., Goullieux A., Khenfer M.M., Bali A., Queneudec M., “Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes”, Construction and Building Materials, vol 23, 2009, pp. 1311-1315. https://doi.org/10.1016/j.conbuildmat.2008.07.029
DOI: https://doi.org/10.1016/j.conbuildmat.2008.07.029
Google Scholar
Ganiron Jr T.U., “Effects of sawdust as fine aggeregate in concrete mixture for building construction”, International Journal of Advanced Science and Technology, vol 63, 2014, pp. 73-82. https://doi.org/10.14257/ijast.2014.63.07
DOI: https://doi.org/10.14257/ijast.2014.63.07
Google Scholar
Sojabi A.O., “Evaluation of the performance of eco-friendly lightweight interlocking concrete paving units incorporating sawdust wastes and laterite”, Cogent Engineering, vol 3:1, 2016. https://doi.org/10.1080/23311916.2016.1255168
DOI: https://doi.org/10.1080/23311916.2016.1255168
Google Scholar
Alabduljabbar H., Huseien G.F., Sam A.R.M., Alyyouef R., Algaifi H.A., Alaskar A., “Engineering Properties of Waste Sawdust-Based Lightweight Alkali-Activated Concrete: Experimental Assessment and Numerical Prediction”, Materials, vol 13, 2020, 5490. https://doi.org/10.3390/ma13235490
DOI: https://doi.org/10.3390/ma13235490
Google Scholar
Fu Q., Yan L., Ning T., Wang B., Kasal B., „Behavior of adhesively bonded engineered wood – Wood chip concrete composite decks: Experimental and analytical studies”, Construction and Building Materials, vol 247, 2020, 118578. https://doi.org/10.1016/j.conbuildmat.2020.118578
DOI: https://doi.org/10.1016/j.conbuildmat.2020.118578
Google Scholar
Bederina M., Mamoret L., Mezereb K., Khenfer M.M., Bali A., Queneudec M., “Effect of the addition of wood shavings on thermal conductivity of sand concretes: Experimental study and modelling”, Construction and Building Materials, vol 21, 2007, pp. 662-668. https://doi.org/10.1016/j.conbuildmat.2005.12.008
DOI: https://doi.org/10.1016/j.conbuildmat.2005.12.008
Google Scholar
Coatlanlem P., Jauberthie R., Rendell F., “Lightweight wood chipping concrete durability”, Construction and Building Materials, vol 20, 2006, pp. 776-781. https://doi.org/10.1016/j.conbuildmat.2005.01.057
DOI: https://doi.org/10.1016/j.conbuildmat.2005.01.057
Google Scholar
Henke K., Talke D., Winter S., “Additive manufacturing of building elements by extrusion of wood concrete”, in World Conference on Timber Engineering, 25-28 August 2016, Wien, Austria.
Google Scholar
Thandavamoorthy T.S., “Wood waste as coarse aggregate in the production of concrete”, European Journal of Environmental and Civil Engineering, vol 20:2, 2016, pp. 125-141. https://doi.org/10.1080/19648189.2015.1016631
DOI: https://doi.org/10.1080/19648189.2015.1016631
Google Scholar
Taoukil D., El bouardi A., Sick F., Mimet A., Ezakhe H., Ajzoul T., “Moisture content influence on the thermal conductivity and diffusivity of wood-concrete composite”, Construction and Building Materials, vol 48, 2013, pp. 104-115. https://doi.org/10.1016/j.conbuildmat.2013.06.067
DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.067
Google Scholar
Jamroży Z., Beton i jego technologie. Warszawa: Wydawnictwo Naukowe PWN, 2005, pp. 464-465. ISBN: 9788301144319
Google Scholar
Golański M., “Potencjał zastosowania produktów organicznych w budownictwie”, Przegląd Budowlany, vol 5, 2011, pp. 80-87.
Google Scholar
Sosoi G. et al.,“Experimental Investigation on Mechanical and Thermal Properties of Concrete Using Waste Materials as an Aggregate Substitution”, Materials, vol 15(5), 2022, pp. 1728. https://doi.org/10.3390/ma15051728
DOI: https://doi.org/10.3390/ma15051728
Google Scholar
Blanco J.M., Frometa Y.G., Madrid M., Cuadrado J., “Thermal Performance Assessment of Walls Made of Three Types od Sustainable Concrete Blocks by Means of FEM and Validated through an Extensive Measurement Campaign”, Sustainability, vol 13, 2021. https://doi.org/10.3390/su13010386
DOI: https://doi.org/10.3390/su13010386
Google Scholar
Abdul Awal A.S.M., Mariyana A.A.K., Hossain M.Z., “Some aspects of physical and mechanical properties of sawdust concrete”, International Journal of GEOMATE, vol 10, 2016, pp. 1918-1923. ISSN: 2186-2982
DOI: https://doi.org/10.21660/2016.21.5304
Google Scholar
Khoshroo M., Javid A.A.S., Shalchiyan M., Nik F., “Evaluation of Mechanical and Durability Properties of Concrete Containing Natural Chekneh Pozzolan and Wood Chips”, Iranian Journal of Science and Technology, vol 44, 2019, pp. 1159-1170. https://doi.org/10.1007/s40996-019-00305-8
DOI: https://doi.org/10.1007/s40996-019-00305-8
Google Scholar
El-Nadoury W. W., “Production of sustainable concrete using sawdust”, Magazine of Civil Engineering, vol 105(5), 2021, pp. 2712-8172. https://doi.org/10.34910/MCE.105.7
Google Scholar
Batool F., Islam K., Cakiroglu C., & Shahriar A., “Effectiveness of wood waste sawdust to produce medium-to low-strength concrete materials”, Journal of Building Engineering, vol 44, 2021. https://doi.org/10.1016/j.jobe.2021.103237
DOI: https://doi.org/10.1016/j.jobe.2021.103237
Google Scholar
Shantveerayya K., Kumar CL M., Shwetha K. G., Jima F., & Fufa K., „Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia”, International Journal of Engineering, vol 35(6), 2022, pp. 1119-1126. https://doi.org/10.5829/IJE.2022.35.06C.03
DOI: https://doi.org/10.5829/IJE.2022.35.06C.03
Google Scholar
Kaya A., Kar F., “Properties of concrete containing waste expanded polystyrene and natural resin”, Construction and Building Materials, vol 105, 2016, pp. 572-578. https://doi.org/10.1016/j.conbuildmat.2015.12.177
DOI: https://doi.org/10.1016/j.conbuildmat.2015.12.177
Google Scholar
Alaneme George U., Mbadike Elvis M., “Modelling of the mechanical properties of concrete with cement ratio partially replaced by aluminium waste and sawdust ash using artificial neural network”, SN Applied Sciences, vol 1(11), 2019, pp. 1-18. https://doi.org/10.1007/s42452-019-1504-2
DOI: https://doi.org/10.1007/s42452-019-1504-2
Google Scholar
Kropidłowska, O. (2022) „Application of sawdust concrete in construction ”, Budownictwo i Architektura, 21(3), s. 005–018. doi: 10.35784/bud-arch.2927.
Autorzy
Oliwia Kropidłowskao.kropidlowska@gmail.com
Wydział Budownictwa Lądowego i Wodnego; Politechnika Wrocławska; Polska
https://orcid.org/0000-0003-2978-2838
Statystyki
Abstract views: 254PDF downloads: 1847 PDF downloads: 31 PDF downloads: 21
Licencja
Utwór dostępny jest na licencji Creative Commons Uznanie autorstwa – Na tych samych warunkach 4.0 Miedzynarodowe.
Budownictwo i Architektura wspiera program otwartej nauki. Czasopismo umożliwia otwarty dostęp (Open Access) do publikacji. Każdy może przeglądać, pobierać i przekazywać artykuły pod warunkiem przestrzegania zasad licencji.
