Publikowanie artykułów jest możliwe po podpisaniu zgody na przeniesienie licencji na czasopismo.
English Temperature and moisture effect on laminated rhombic hyperbolic paraboloid
Abhay Chaubey
abhaychaubey26@gmail.comDepartment of Civil Engineering; Koneru Lakshmaiah Education Foundation; (Indie)
https://orcid.org/0000-0003-4607-9765
Ajay Kumar
Department of Civil Engineering; National Institute of Technology Patna; (Indie)
https://orcid.org/0000-0003-0083-9052
Małgorzata Grzegorczyk-Franczak
Wydział Budownictwa i Architektury; Politechnika Lubelska; (Polska)
https://orcid.org/0000-0002-6119-2902
Małgorzata Szafraniec
Wydział Budownictwa i Architektury; Politechnika Lubelska; (Polska)
https://orcid.org/0000-0002-5862-9456
Abstrakt
The current work presents a hygrothermal analysis of laminated composite rhombic hyperbolic paraboloids. The cubic variation in displacement field together with cross curvature effects of the shell were used to solve the hygrothermal problem. Because of the parabolic variation of the transverse shear deformation, the shear correction factor was not necessary in this paper. In the mathematical model, the zero conditions of the transverse shear stress at the bottom and top of the shell were applied. The nine-noded curved isoparametric element with seven unknowns in each node was used to implement the present realistic mathematical model. The implementation of the finite element C0 (FE) of the present mathematical model was coded and performed in FORTRAN. The skew hyperbolic paraboloid on which the hygrothermal analysis was conducted had various temperatures, ply orientation, curvatures, moisture concentration, boundary conditions and thickness ratio. The paper shows that with the increase of the skew angle, the non-dimensional deflection decreases, and with the increase of moisture concentration, hygrothermal load and curvature ratio, the deflection increases. The results of the model presented in the paper were compared with other results published in the literature and were found to be consistent with them.
Słowa kluczowe:
temperature, moisture concentration, laminated, skew angle, ply orientationBibliografia
Suchorab, Z., Sobczuk, H., Łagód, G., “Estimation of building material moisture using non-invasive TDR sensors”, in Thermophysics 2016: 21st International Meeting. AIP Conference Proceedings, vol. 1752, 2016, pp. 1–7. https://doi.org/10.1063/1.4955231
DOI: https://doi.org/10.1063/1.4955231
Google Scholar
Suchorab, Z. et al., “A Noninvasive TDR Sensor to Measure the Moisture Content of Rigid Porous Materials”, Sensors (Basel), vol. 11(18): 3935, (2018), pp. 1-20. https://doi.org/10.3390/s18113935
DOI: https://doi.org/10.3390/s18113935
Google Scholar
Barnat-Hunek, D., Siddique, R., Łagód, G., “Properties of hydrophobised lightweight mortars with expanded cork”, Construction and Building Materials, vol. 155, (2017) pp. 15–25. https://doi.org/10.1016/j.conbuildmat.2017.08.052
DOI: https://doi.org/10.1016/j.conbuildmat.2017.08.052
Google Scholar
Pipes, R.B., Vinson, J.R., Chou, T.W., “On the Hygrothermal Response of Laminated Composite Systems”, Journal of Composite Materials, vol. 10 (1976), pp. 129–148. https://doi.org/10.1177/002199837601000203
DOI: https://doi.org/10.1177/002199837601000203
Google Scholar
Wu, C.H. and Tauchert, T.R., “Thermoelastic analysts of laminated plates. 2: Antisymmetric crossply and angle-ply laminates”, Journal of Thermal Stresses, vol. 3, (1980), pp. 365–378. https://doi.org/10.1080/01495738008926975
DOI: https://doi.org/10.1080/01495738008926975
Google Scholar
Lee, S.Y. and Yen, W.J., “Hygrothermal effects on the stability of a cylindrical composite shell panel”, Computers & Structures, vol. 33, (1989), pp. 551–559. https://doi.org/10.1016/0045-7949(89)90029-1
DOI: https://doi.org/10.1016/0045-7949(89)90029-1
Google Scholar
Whitney, J.M. and Ashton, J.E., “Effect of environment on the elastic response of layered composite plates”, American Institute of Aeronautics and Astronautics Journal, vol. 9(9), (1971), pp. 1708–1713. https://doi.org/10.2514/3.49976
DOI: https://doi.org/10.2514/3.49976
Google Scholar
Pell, W.H., “Thermal deflections of anisotropic thin plates”, Quarterly Applied Mathematics, vol. 4, (1940), pp. 27–44. https://doi.org/10.1090/qam/16032
DOI: https://doi.org/10.1090/qam/16032
Google Scholar
Sai Ram, K.S. and Sinha, P.K., “Hygrothermal effects on the bending characteristics of laminated composite plates”, Computers & Structures, vol. 40, (1991), pp. 1009–1015. https://doi.org/10.1016/0045-7949(91)90332-G
DOI: https://doi.org/10.1016/0045-7949(91)90332-G
Google Scholar
Reddy, J.N. and Hsu, Y.S., “Effects of shear deformation and anisotropy on the thermal bending of layered composite plates”, Journal of Thermal Stresses, vol. 3, (1980), pp. 475–493. https://doi.org/10.1080/01495738008926984
DOI: https://doi.org/10.1080/01495738008926984
Google Scholar
Doxsee, L.E., “A higher-order theory of hygrothermal behavior of laminated composite shells”, International Journal of Solids and Structures, vol. 25, (1989), pp. 339–355. https://doi.org/10.1016/0020-7683(89)90052-8
DOI: https://doi.org/10.1016/0020-7683(89)90052-8
Google Scholar
Lee, S.Y. et al., “Hygrothermal effects on the linear and nonlinear analysis of symmetric angleply laminated plates”, Composite Structures, vol. 21, (1992), pp. 41–48. https://doi.org/10.1016/0263-8223(92)90078-Q
DOI: https://doi.org/10.1016/0263-8223(92)90078-Q
Google Scholar
Zenkour, A.M. and Alghanmi, R.A., “Bending of symmetric cross-ply multilayered plates in hygrothermal environments”, Journal of Mathematical Models in Engineering, vol. 2, (2016), pp. 94–107. https://doi.org/10.21595/mme.2016.17405
DOI: https://doi.org/10.21595/mme.2016.17405
Google Scholar
Biswal, M., Sahu, S.K., Asha, A. V., “Experimental and numerical studies on free vibration of laminated composite shallow shells in hygrothermal environment”, Composite Structures, vol. 127, (2015), pp. 165–174. https://doi.org/10.1016/j.compstruct.2015.03.007
DOI: https://doi.org/10.1016/j.compstruct.2015.03.007
Google Scholar
Zenkour, A.M. and Fares, M.E., “Thermal bending analysis of composite laminated cylindrical shells using a refined first-order theory”, Journal of Thermal Stresses, vol. 23, (2000), pp. 505–526, https://doi.org/10.1080/014957300403969
DOI: https://doi.org/10.1080/014957300403969
Google Scholar
Singh, S.K. and Chakrabarti, A., “Hygrothermal analysis of laminated composite plates by using efficient higher order shear deformation theory”, Journal of Solid Mechanics, vol. 3, (2011), pp. 85–95.
Google Scholar
Zenkour, A.M., “Analytical solution for bending of cross-ply laminated plates under thermo-mechanical loading”, Composite Structures, vol. 65, (2004), pp. 367–379. https://doi.org/10.1016/j.compstruct.2003.11.012
DOI: https://doi.org/10.1016/j.compstruct.2003.11.012
Google Scholar
Brischetto, S., “Hygrothermoelastic analysis of multilayered composite and sandwich shells”, Journal of Sandwich Structures & Materials, vol. 15, (2013), pp. 168–202. https://doi. org/10.1177/1099636212471358
Google Scholar
Upadhyay, A.K., Pandey, R., Shukla, K.K., “Nonlinear flexural response of laminated composite plates under hygro-thermo-mechanical loading”, Communications in Nonlinear Science and Numerical Simulation, vol. 15, (2010), pp. 2634–2650. https://doi.org/10.1016/j.cnsns.2009.08.026
DOI: https://doi.org/10.1016/j.cnsns.2009.08.026
Google Scholar
Ali, J.S.M., Alsubari, S., Aminanda, Y., “A Higher Order Theory for Bending of Cross Ply Laminated Cylindrical Shell under Hygrothermal Loads”, Advanced Materials Research, vol. 1115, (2015), pp. 509–512. https://doi.org/10.4028/www.scientific.net/amr.1115.509
DOI: https://doi.org/10.4028/www.scientific.net/AMR.1115.509
Google Scholar
Patel, B.P., Ganapathi, M., Makhecha, D.P., “Hygrothermal effects on the structural behaviour of thick composite laminates using higher-order theory”, Composite Structures, vol. 56, (2002), pp. 25–34. https://doi.org/10.1016/S0263-8223(01)00182-9
DOI: https://doi.org/10.1016/S0263-8223(01)00182-9
Google Scholar
Ali, J.S.M., Bhaskar, K., Varadan, T.K., “A new theory for accurate thermal/mechanical flexural analysis of symmetric laminated plates”, Composite Structures, vol. 45, (1999), pp. 227–232. https://doi.org/10.1016/S0263-8223(99)00028-8
DOI: https://doi.org/10.1016/S0263-8223(99)00028-8
Google Scholar
Brischetto, S. and Carrera, E., “Coupled thermo-mechanical analysis of one-layered and multilayered isotropic and composite shells”, CMES: Computer Modeling in Engineering & Sciences, vol. 56(3), (2010), pp. 249–302. https://doi.org/10.3970/cmes.2010.056.249
Google Scholar
Khare, R.K., Kant, T., Garg, A.K., “Closed-form thermo-mechanical solutions of higher-order theories of cross-ply laminated shallow shells”, Composite Structures, vol. 59, (2003), pp. 313–340. https://doi.org/10.1016/S0263-8223(02)00245-3
DOI: https://doi.org/10.1016/S0263-8223(02)00245-3
Google Scholar
Tauchert, T.R., “Thermally induced flexure, buckling, and vibration of plates”, Applied Mechanics Reviews, vol. 44, (1991), pp. 347–360. https://doi.org/10.1115/1.3119508
DOI: https://doi.org/10.1115/1.3119508
Google Scholar
Khdeir, A.A., Rajab, M.D., Reddy, J.N., “Thermal effects on the response of cross-ply laminated shallow shells”, International Journal of Solids and Structures, vol. 29, (1992), pp. 653–667. https://doi.org/10.1016/0020-7683(92)90059-3
DOI: https://doi.org/10.1016/0020-7683(92)90059-3
Google Scholar
Jin, Q. and Yao, W., “Hygrothermal analysis of laminated composite plates in terms of an improved C0-type global–local model”, Aerospace Science and Technology, vol. 63, (2017), pp. 328–343. https://doi.or/10.1016/j.ast.2017.01.004
Google Scholar
Lal, A.; Singh, B.N., Anand, S., “Nonlinear bending response of laminated composite spherical shell panel with system randomness subjected to hygro-thermo-mechanical loading”, International Journal of Mechanical Sciences, vol. 53, (2011), pp. 855–866. https://doi.org/10.1016/j.ijmecsci.2011.07.008
DOI: https://doi.org/10.1016/j.ijmecsci.2011.07.008
Google Scholar
Chao, W.C. and Reddy, J.N., “Analysis of laminated composite shells using a degenerated 3-D element”, International Journal for Numerical Methods in Engineering, vol. 20, (1984), pp. 1991–2007. https://doi.org/10.1002/nme.1620201104
DOI: https://doi.org/10.1002/nme.1620201104
Google Scholar
Ali, J.S.M., Alsubari, S., Aminanda, Y., “Hygrothermoelastic analysis of orthotropic cylindrical shells”, Latin American Journal Solids Structures, vol. 13, (2016), pp. 573–589. https://doi.org/10.1590/1679-78252249
DOI: https://doi.org/10.1590/1679-78252249
Google Scholar
Chaubey, A. (2020) „English Temperature and moisture effect on laminated rhombic hyperbolic paraboloid”, Budownictwo i Architektura, 18(4), s. 023–040. doi: 10.35784/bud-arch.763.
Autorzy
Abhay Chaubeyabhaychaubey26@gmail.com
Department of Civil Engineering; Koneru Lakshmaiah Education Foundation; Indie
https://orcid.org/0000-0003-4607-9765
Autorzy
Ajay KumarDepartment of Civil Engineering; National Institute of Technology Patna; Indie
https://orcid.org/0000-0003-0083-9052
Autorzy
Małgorzata Grzegorczyk-FranczakWydział Budownictwa i Architektury; Politechnika Lubelska; Polska
https://orcid.org/0000-0002-6119-2902
Autorzy
Małgorzata SzafraniecWydział Budownictwa i Architektury; Politechnika Lubelska; Polska
https://orcid.org/0000-0002-5862-9456
Statystyki
Abstract views: 375PDF downloads: 235
Licencja
Utwór dostępny jest na licencji Creative Commons Uznanie autorstwa – Użycie niekomercyjne – Bez utworów zależnych 4.0 Międzynarodowe.
Budownictwo i Architektura wspiera program otwartej nauki. Czasopismo umożliwia otwarty dostęp (Open Access) do publikacji. Każdy może przeglądać, pobierać i przekazywać artykuły pod warunkiem przestrzegania zasad licencji.
