COUPLING BOUNDARY ELEMENT METHOD WITH LEVEL SET METHOD TO SOLVE INVERSE PROBLEM
Tomasz Rymarczyk
tomasz.rymarczyk@netrix.com.plNetrix S.A., Research and Development Center (Poland)
Paweł Tchórzewski
Netrix S.A., Research and Development Center (Poland)
Jan Sikora
Lublin University of Technology, Institute of Electronics and Information Technology; Electrotechnical Institute (Poland)
Abstract
The boundary element method and the level set method can be used in order to solve the inverse problem for electric field. In this approach the adjoint equation arises in each iteration step. Results of the numerical calculations show that the boundary element method can be applied successfully to obtain approximate solution of the adjoint equation. The proposed solution algorithm is initialized by using topological sensitivity analysis. Shape derivatives and material derivatives have been incorporated with the level set method to investigate shape optimization problems. The shape derivative measures the sensitivity of boundary perturbations. The coupled algorithm is a relatively new procedure to overcome this problem. Experimental results have demonstrated the efficiency of the proposed approach to achieve the solution of the inverse problem.
Keywords:
inverse problem, boundary element method, level set methodReferences
Allaire G., Gournay F. De, Jouve F., Toader A. M.: Structural optimization using topological and shape sensitivity via a level set method, Control and Cybernetics, vol. 34, 2005, 59–80.
Google Scholar
Chen W., Cheng J., Lin W.: A level set method to reconstruct the discontinuity of the conductivity in EIT, Science in China Series A: Mathematics, vol. 52, 2009.
Google Scholar
Ito K., Kunish K., Li Z.: The Level-Set Function Approach to an Inverse Interface Problem, Inverse Problems, vol. 17, no. 5, 2001, 1225–1242.
Google Scholar
Jabłoński P.: Metoda elementów brzegowych w analizie pola elektromagnetycznego, Wydawnictwo Politechniki Częstochowskiej, 2003.
Google Scholar
Osher S., Sethian J. A.: Fronts Propagating with Curvature Dependent Speed: Algorithms Based on Hamilton-Jacobi Formulations, Journal of Computational Physics, vol. 79, 1988, 12–49.
Google Scholar
Osher S., Santosa F.: Level set methods for optimization problems involving geometry and constraints. Frequencies of a two-density inhomogeneous drum, Journal of Computational Physics, vol. 171, 2001, 272–288.
Google Scholar
Osher S., Fedkiw R.: Level Set Methods and Dynamic Implicit Surfaces, Springer New York, 2003.
Google Scholar
Rymarczyk T.: Using electrical impedance tomography to monitoring flood banks, International Journal of Applied Electromagnetics and Mechanics 45, 2014, 489–494.
Google Scholar
Rymarczyk T.: Characterization of the shape of unknown objects by inverse numerical methods, Przegląd Elektrotechniczny, R. 88, 7b, 2012, 138-140.
Google Scholar
Rymarczyk T., Sikora J., Waleska B.: Coupled Boundary Element Method and Level Set Function for Solving Inverse Problem in EIT, 7th World Congress on Industrial Process Tomography, WCIPT7, Krakow 2013.
Google Scholar
Rymarczyk:T., Adamkiewicz P., Duda K., Szumowski J., Sikora J.: New Electrical Tomographic Method to Determine Dampness in Historical Buildings, Achieve of Electrical Engineering, v.65, 2/2016, 273–283
Google Scholar
Sethian J.A.: Level Set Methods and Fast Marching Methods, Cambridge Univeristy Press, 1999.
Google Scholar
Sikora J.: Boundary Element Method for Impedance and Optical Tomography, Warsaw University of Technology Publisher, 2007.
Google Scholar
Smolik W, Forward Problem Solver for Image Reconstruction by Nonlinear Optimization in Electrical Capacitance Tomography, Flow Measurement and Instrumentation, Vol. 21, Issue 1, 2010, 70–77.
Google Scholar
Wajman R., Fiderek P., Fidos H., Jaworski T., Nowakowski J., Sankowski D., Banasiak R.: Metrological evaluation of a 3D electrical capacitance tomography measurement system for two-phase flow fraction determination; Meas. Sci. Technol. Vol. 24, 2013, No. 065302.
Google Scholar
Tai C., Chung E., Chan T.: Electrical impedance tomography using level set representation and total variational regularization, Journal of Computational Physics, vol. 205, no. 1, 2005, 357–372.
Google Scholar
Vese L., Chan T.: A new multiphase level set framework for image segmentation via the Mumford and Shah model. CAM Report 01-25, UCLA Math. Dept., 2001.
Google Scholar
Authors
Tomasz Rymarczyktomasz.rymarczyk@netrix.com.pl
Netrix S.A., Research and Development Center Poland
Authors
Paweł TchórzewskiNetrix S.A., Research and Development Center Poland
Authors
Jan SikoraLublin University of Technology, Institute of Electronics and Information Technology; Electrotechnical Institute Poland
Statistics
Abstract views: 257PDF downloads: 65
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Tomasz Rymarczyk, Jan Sikora, Przemysław Adamkiewicz, Piotr Bożek, Michał Gołąbek, THE CHANCES OF PRECISION ENHANCE FOR ULTRASONIC IMAGING , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 3 (2018)
- Tomasz Rymarczyk, Paweł Tchórzewski, Przemysław Adamkiewicz, Jan Sikora, ELECTRICAL RESISTANCE TOMOGRAPH FOR DISTRIBUTED MEASUREMENTS FOR FLOOD EMBANKMENT , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 3 (2018)
- Tomasz Rymarczyk, Jan Sikora, ON PRECISION ACOUSTIC WAVE CALCULATION IN A FREQUENCY DOMAIN , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 2 (2022)
- Łukasz Maciura, Dariusz Wójcik, Tomasz Rymarczyk, Krzysztof Król, NOVEL HYBRID ALGORITHM USING CONVOLUTIONAL AUTOENCODER WITH SVM FOR ELECTRICAL IMPEDANCE TOMOGRAPHY AND ULTRASOUND COMPUTED TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 2 (2023)
- Tomasz Rymarczyk, Przemysław Adamkiewicz, Paweł Tchórzewski, IDEA OF ELECTRICAL TOMOGRAPHY SYSTEM FOR MONITORING LUNG VENTILATION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Tomasz Rymarczyk, Przemysław Adamkiewicz, NONDESTRUCTIVE METHOD TO DETERMINE MOISTURE AREA IN HISTORICAL BUILDING , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Tomasz Rymarczyk, USING ELECTRICAL IMPEDANCE TOMOGRAPHY IN LINEAR ARRAYS OF MEASUREMENT , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Tomasz Rymarczyk, Grzegorz Kłosowski, Przemysław Adamkiewicz, Karol Duda, Jakub Szumowski, Paweł Tchórzewski, IDEA OF PARAMETRIC AND SEMANTIC OPEN PLATFORM SMART DEVICES SENSOR , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Paweł Tchórzewski, ELECTRON OSCILLATIONS IN A QUANTUM DOT SYSTEM – NUMERICAL ANALISIS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 4 No. 2 (2014)
- Tomasz Rymarczyk, Karol Duda, Paweł Rymarczyk, Daniel Olchowy, Jan Sikora, MEASURING DATA ACQUISITION HARDWARE FOR ELECTRICAL IMPEDANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)