ELEKTRYCZNY TOMOGRAF REZYSTANCYJNY DO POMIARÓW ROZPROSZONYCH DLA WAŁÓW PRZECIWPOWODZIOWYCH

Tomasz Rymarczyk; Paweł Tchórzewski; Przemysław Adamkiewicz; Jan Sikora

doi:10.5604/01.3001.0012.5279

Open full text

PDF

Published: Sep 25, 2018

DOI: https://doi.org/10.5604/01.3001.0012.5279

Issue Vol. 8 No. 3 (2018)

Articles

FLOW VELOCITY MEASUREMENTS IN THE OPEN CHANNELS
Volodymyr Drevetskiy, Roman Muran

4-6
INSTRUMENT DESIGN FOR CYBER RISK ASSESSMENT IN INSURABILITY VERIFICATION
David Nicolas Bartolini, Andreas Ahrens, Jelena Zascerinska

7-10
MULTICRITERION ANALYSIS AND CHOOSING OF THE OPTIMAL ROUTING IN AD-HOC NETWORKS
Valeriy Bezruk, Kyrylo Halchenko

11-14
MODELS AND METHODS OF PROCESSING OF INFORMATION ON LOADS OF ACOUSTIC SIGNALS IN TECHNICAL DIAGNOSTIC SYSTEMS
Artem Sharko

15-18
THE CHANCES OF PRECISION ENHANCE FOR ULTRASONIC IMAGING
Tomasz Rymarczyk, Jan Sikora, Przemysław Adamkiewicz, Piotr Bożek, Michał Gołąbek

19-24
ELECTRICAL RESISTANCE TOMOGRAPH FOR DISTRIBUTED MEASUREMENTS FOR FLOOD EMBANKMENT
Tomasz Rymarczyk, Paweł Tchórzewski, Przemysław Adamkiewicz, Jan Sikora

25-28
MANUFACTURING PLANNING AND CONTROL SYSTEM USING TOMOGRAPHIC SENSORS
Konrad Niderla, Tomasz Rymarczyk, Jan Sikora

29-34
METHODS FOR DETECTION ANALYSIS IN QUALITY CONTROL SYSTEM
Konrad Kania, Tomasz Rymarczyk

35-38
NEURAL NETWORK AND CONVOLUTIONAL ALGORITH TO EXTRACT SHAPES BY E-MEDICUS APPLICATION
Tomasz Rymarczyk, Barbara Stefaniak, Przemysław Adamkiewicz

39-42
DESIGN OF DATA ANALYSIS SYSTEMS FOR BUSINESS PROCESS AUTOMATION
Tomasz Rymarczyk, Tomasz Cieplak, Grzegorz Kłosowski, Paweł Rymarczyk

43-46
OVERVIEW OF CURRENTLY USED WIRELESS ELECTRICAL VEHICLE CHARGING SOLUTIONS
Damian Dobrzański

47-50
ANALYSIS OF THE FLAME PULSATION SIGNALS USING A SHORT-TIME FOURIER TRANSFORM
Żaklin Grądz

51-54
DIGITAL TECHNOLOGIES FOR SUPPORTING THE MANAGEMENT PROCESSES OF TEACHER PROFESSIONAL GROWTH WITHIN THE DEPARTMENTS OF MANAGEMENT IN THE UNIVERSITIES OF THE REPUBLIC OF POLAND
Victor Oliynyk, Iryna M. Androshchuk

55-59
THE PAST MEETS THE FUTURE – A MUSEUM AS A SMART BUILDING
Mirosław Dechnik

60-64
THE INFLUENCE OF SELECTED TECHNICAL PARAMETERS ON THE RECEPTION OF RADIO WAVES
Jacek Łukasz Wilk-Jakubowski

65-68
TWO PARALLEL WIND MEASUREMENTS AS AN ACCURATE ASSESSMENT OF LOCAL WIND ENERGY RESOURCES
Piotr Gnyp

69-72

DOI

https://doi.org/10.5604/01.3001.0012.5279

Authors

Tomasz Rymarczyk

tomasz@rymarczyk.com

1Research and Development Center, Netrix S.A., Lublin, 2University of Economics and Innovation in Lublin, Poland

Paweł Tchórzewski

pawel.tchorzewski@netrix.com.pl

Research and Development Center, Netrix S.A., Lublin, Poland

Przemysław Adamkiewicz

p.adamkiewicz@netrix.com.pl

Research and Development Center, Netrix S.A., Lublin, Poland

Jan Sikora

sik59@wp.pl

Research and Development Center, Netrix S.A., Lublin, Poland

Abstract

In this paper the terrain electrical resistance tomograph was presented. Its aim is to verify the repeatability of test results by eliminating laboratory equipment, and to validate the use of simple and cheap electronics to the structure of the ERT. Electrical resistance tomography, which is based on measuring potential difference, can be used to calculate conductivity

Keywords:

electrical resistance tomography, sensors, measurements

References

Jones G., Sentenac P., Zielinski M.: Desiccation cracking detection using 2-D and 3-D Electrical Resistivity Tomography: Validation on a flood embankment. Journal of Applied Geophysics106/2014.

Duda K., Adamkiewicz P., Rymarczyk T.: Nondestructive Method to Examine Brick Wall Dampness. International Interdisciplinary PhD Workshop 2016, 68–71.

Filipowicz S.F., Rymarczyk T.: Measurement Methods and Image Reconstruction in Electrical Impedance Tomography. Przeglad Elektrotechniczny 88(6)/2012, 247–250.

Kłosowski G., Kozłowski E., Gola A.: Integer linear programming in optimization of waste after cutting in the furniture manufacturing. Advances in Intelligent Systems and Computing 637/2018, 260–270.

Kryszyn J., Smolik W.: Toolbox for 3D Modelling and Image Reconstruction in Electrical Capacitance Tomography. Automatyka, Pomiary w Gospodarce i Ochronie Środowiska 1/2017, 137–145.

Polakowski K., Filipowicz S.F., Sikora J., Rymarczyk T.: Quality of imaging in multipath tomography. Przeglad Elektrotechniczny 85(12)/2009, 134–136.

Polakowski K., Filipowicz S., Sikora J., Rymarczyk T.: Tomography Technology Application for Workflows of Gases Monitoring in The Automotive Systems, Przegląd Elektrotechniczny 84(12)/2008, 227–229.

Rymarczyk T., Filipowicz S., Sikora J., Polakowski K.: A piecewise-constant minimal partition problem in the image reconstruction. Przegląd Elektrotechniczny 85(12)/2009, 141–143.

Rymarczyk T., Sikora J., Waleska B.: Coupled Boundary Element Method and Level Set Function for Solving Inverse Problem in EIT. 7th World Congress on Industrial Process Tomography, WCIPT7 2013, 312–319.

Smolik W.: Forward Problem Solver for Image Reconstruction by Nonlinear Optimization in Electrical Capacitance Tomography. Flow Measurement and Instrumentation 21/2010, 70–77.

Soleimani M., Mitchell CN, Banasiak R., Wajman R., Adler A.: Four-dimensional electrical capacitance tomography imaging using experimental data. Progress In Electromagnetics Research 90/2009, 171–186.

Wajman R., Banasiak R.: Tunnel-based method of sensitivity matrix calculation for 3D-ECT imaging. Sensor Review 34/2014, 273–283.

Rymarczyk, T., Tchórzewski, P., Adamkiewicz, P., & Sikora, J. (2018). ELECTRICAL RESISTANCE TOMOGRAPH FOR DISTRIBUTED MEASUREMENTS FOR FLOOD EMBANKMENT. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 8(3), 25–28. https://doi.org/10.5604/01.3001.0012.5279

ELECTRICAL RESISTANCE TOMOGRAPH FOR DISTRIBUTED MEASUREMENTS FOR FLOOD EMBANKMENT

Issue Vol. 8 No. 3 (2018)

Archives

DOI

Authors

Abstract

Keywords:

References

License

Article Sidebar

Issue Vol. 8 No. 3 (2018)

Archives

Main Article Content

DOI

Authors

Abstract

Keywords:

References

Article Details

License