OPTIMIZATION OF PARTS CUTTING PROCESS PARAMETERS WORKING IN CONDITIONS OF CYCLIC LOADS
Kateryna Barandych
Barandichk@ukr.netNational Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (Ukraine)
https://orcid.org/0000-0003-0331-3216
Sergii Vysloukh
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (Ukraine)
https://orcid.org/0000-0002-2204-2602
Grygoriy Tymchyk
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (Ukraine)
https://orcid.org/0000-0003-1079-998X
Oleksandr Murashchenko
Vinnytsia National Technical University (Ukraine)
https://orcid.org/0009-0005-9314-2095
Saule Smailova
D.Serikbayev East Kazakhstan State Technical University (Kazakhstan)
https://orcid.org/0000-0002-8411-3584
Saule Kumargazhanova
D.Serikbayev East Kazakhstan State Technical University (Kazakhstan)
http://orcid.org/0000-0002-6744-4023
Abstract
The paper is devoted to questions of technological fatigue life assurance of parts working in conditions of cyclic loads by optimization their cutting conditions for finish turning process. In order to solve the task of optimizing the parts cutting conditions, the corresponding software, based on the previously created mathematical model of the finishing turning process, was developed in the C# programming language. With the purpose of technological providing the necessary fatigue life of the part, taking into account the real conditions of its operation for the maximum productivity of the finishing turning process, the methodical recommendations for determining the optimal parts cutting conditions at the phase of production technological preparation are given. An example application of the proposed solution is presented.
Keywords:
technological suport, fatigue life, finishing turning proces, optimizationReferences
Barandych K. S., Vysloukh S. P.: Technological Supportof Parts’ Fatigue Life by Modeling Their Turning Process. Naukovi Visti NTUU KPI 2, 2018, 61–69.
DOI: https://doi.org/10.20535/1810-0546.2018.2.129025
Google Scholar
Barandych K. S, Vysloukh S. P, Antonyuk V. S.: Ensuring Fatigue Life of Parts During Finish Turning with Cubic Boron Nitride Tools. Journal of Superhard Materials 3(40), 2018, 206–215.
DOI: https://doi.org/10.3103/S1063457618030085
Google Scholar
Barandych C. S., Vysloukh S. P.: Generating finite-element model of the shaft and settlement boundary value problem of stress-strain state. Zbirnyk Naukovykh Prats’, Seriya: Haluzeve Mashynobuduvannya, Budivnytstvo 2, 2014, 228–232.
Google Scholar
Bernyk P. S. et al.: Tekhnolohichni metody zabezpechennya nadiynosti mashyn. Kyiv 2004.
Google Scholar
Javidi A.: Influence of Machining on the Surface Integrity and Fatigue Strength of 34CrNiMo6 Steel. Thesis in partial fulfilment of the requirements for the degree of a Doctor of ontanistic Sciences (Dr. mont.), 2008.
Google Scholar
Karpenko H. V. et al.: Malotsyklovaya ustalost’ staly v rabochykh sreda. Kyiv 1977.
Google Scholar
Kukharchuk V. et al.: Features of the angular speed dynamic measurements with the use of an encoder. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska – IAPGOS 12(3), 2022, 20–26.
DOI: https://doi.org/10.35784/iapgos.3035
Google Scholar
Lavrenko Ya. I.: Do pitannya viznachennya resursu konstruktivnykh yelementiv pri zminnykh navantazhennyakh, Visnyk NTUU “KPI” Seriia Mashinostroyeniye 56, 2009, 88–92.
Google Scholar
Melnychuk P. P. et al.: Tekhnolohyya mashynobuduvannya, Zhytomyr 2005.
Google Scholar
M’Saoubi R., et al.: A review of surface integrity in machining and its impact on functional performance and life of machined products. Int. J. Sustainable Manufacturing 1, 2008, 203–236.
DOI: https://doi.org/10.1504/IJSM.2008.019234
Google Scholar
Polishchuk L. Bilyy O., Kharchenko Y.: Prediction of the propagation of crack-like defects in profile elements of the boom of stack discharge conveyor. Eastern-European Journal of Enterprise Technologies 1(6), 2016, 44–52.
DOI: https://doi.org/10.15587/1729-4061.2016.85502
Google Scholar
Polishchuk L., Mamyrbayev O., Gromaszek K.: Mechatronic Systems 2: Applications in Material Handling Processes and Robotics (1st ed.). Routledge, 2021 [http://doi.org/10.1201/9781003225447].
DOI: https://doi.org/10.1201/9781003225447
Google Scholar
Pramanik A. et al.: Littlefair Fatigue life of machined components. Adv. Manuf. 5, 2017, 59–76 [http://doi.org/10.1007/s40436-016-0168-z].
DOI: https://doi.org/10.1007/s40436-016-0168-z
Google Scholar
Pysarenko V. H., Bernyk P. S., Syvak R. I.: Tekhnolohichni metody pidvyshchennya nadiynosti detaley mashyn, Vinnytsia 2008.
Google Scholar
Vislouh S. P.: Informatsioni tekhnologii v zadachakh tekhnologichnoyi pidgotovki priladota Mashinobudivnogo virobnitstva. Kyiv 2011.
Google Scholar
Wójcik W., Pavlov S., Kalimoldayev M.: Mechatronic Systems 1: Applications in Transport, Logistics, Diagnostics, and Control (1st ed.). Routledge, 2021 [http://doi.org/10.1201/9781003224136].
DOI: https://doi.org/10.1201/9781003224136
Google Scholar
Authors
Kateryna BarandychBarandichk@ukr.net
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Ukraine
https://orcid.org/0000-0003-0331-3216
Authors
Sergii VysloukhNational Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Ukraine
https://orcid.org/0000-0002-2204-2602
Authors
Grygoriy TymchykNational Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Ukraine
https://orcid.org/0000-0003-1079-998X
Authors
Oleksandr MurashchenkoVinnytsia National Technical University Ukraine
https://orcid.org/0009-0005-9314-2095
Authors
Saule SmailovaD.Serikbayev East Kazakhstan State Technical University Kazakhstan
https://orcid.org/0000-0002-8411-3584
Authors
Saule KumargazhanovaD.Serikbayev East Kazakhstan State Technical University Kazakhstan
http://orcid.org/0000-0002-6744-4023
Statistics
Abstract views: 131PDF downloads: 103
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Leonid Timchenko, Natalia Kokriatskaia, Mykhailo Rozvodiuk, Volodymyr Tverdomed, Yuri Kutaev, Saule Smailova, Vladyslav Plisenko, Liudmyla Semenova, Dmytro Zhuk, THE USE OF Q-PREPARATION FOR AMPLITUDE FILTERING OF DISCRETED IMAGE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 4 (2022)
- Roman Kvуetnyy, Yuriy Bunyak, Olga Sofina, Volodymyr Kotsiubynskyi, Tetiana Piliavoz, Olena Stoliarenko, Saule Kumargazhanova, TENSOR AND VECTOR APPROACHES TO OBJECTS RECOGNITION BY INVERSE FEATURE FILTERS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 1 (2024)
- Leonid Timchenko, Natalia Kokriatskaya, Volodymyr Tverdomed, Oleksandr Stetsenko, Valentina Kaplun, Oleg K. Kolesnytskyj, Oleksandr Reshetnik, Saule Smailova, Ulzhalgas Zhunissova, SEGMENTATION OF MULTIGRADATION IMAGES BASED ON SPATIAL CONNECTIVITY FEATURES , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 3 (2023)
- Olexandra Litvinenko, Victor Paliy, Olena Vуsotska, Inna Vishtak, Saule Kumargazhanova, POLARIZATION TOMOGRAPHY OF THE POLYCRYSTALINNE STRUCTURE OF HISTOLOGICAL SECTIONS OF HUMAN ORGANS IN DETERMINATION OF THE OLD DAMAGE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 4 (2022)
- Nataliia Kozan, Oleksandr Saleha, Olexander Dubolazov, Yuriy Ushenko, Iryna Soltys, Oleksandr Ushenko, Oleksandr Olar, Victor Paliy, Saule Smailova, POLARIZATION-CORRELATION MAPPING OF MICROSCOPIC IMAGES OF BIOLOGICAL TISSUES OF DIFFERENT MORPHOLOGICAL STRUCTURE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 3 (2024)
- Andrei Padure, Oksana Bakun, Ivan Mikirin, Oleksandr Dubolazov, Iryna Soltys, Oleksandr Olar, Yuriy Ushenko, Oleksandr Ushenko, Irina Palii, Saule Kumargazhanova, DIFFERENTIAL MUELLER-MATRIX MAPPING OF THE POLYCRYSTALLINE COMPONENT OF BIOLOGICAL TISSUES OF HUMAN ORGANS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 4 (2024)
