COMPUTER SUPPORT OF ERGONOMIC ANALYSIS OF WORKING CONDITIONS AT WORKSTATIONS
Damian KOLNY
dkolny@ath.bielsko.pl University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Dawid KURCZYK
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Józef MATUSZEK
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Abstract
The article shows issues of using computer-aided technologies for ergonomic analysis at worksplaces using a dedicated tool in the Delmia environment. The scope of the ergonomic evaluation has been limited to the analysis of RULA and NIOSH, the data needed for it was gathered on the basis of observation, interview and task analysis. The results of the research showed the strenous nature of the work, therefore improvements within undertaken workplace area were proposed and re-analyzed. The obtained results proved reduction of strenousness, which was the basis for the practical implementation of the proposed changes.
Keywords:
work ergonomics, modeling and simulationReferences
Genaidy, A. M., Al.-Shed, A. A., & Karwowski W. (1994). Postural stress analysis in industry. Applied Ergonomics, 25(2), 77–87.
DOI: https://doi.org/10.1016/0003-6870(94)90068-X
Google Scholar
Klembalska, K. (2006). Modelowanie bezpieczeństwa maszyny na etapie koncepcji jako narzędzie kształtowania ergonomii i bezpieczeństwa pracy. Journal of Research and Applications in Agricultural Engineering, 51(4), 21–29.
Google Scholar
Lasota, A. M., & Hankiewicz, K. (2015). Ergonomiczna ocena pozycji przy pracy w procesie cięcia i pakowania materiałów termoizolacyjnych. Logistyka, 5, 1059–1065.
Google Scholar
Marconi, M., Germani, M., Favi, C., & Raffaeli, R. (2018). CAD feature recognition as a means to prevent ergonomics issues during manual assembly tasks. Computer-Aided Design and Applications. https://doi.org/10.1080/16864360.2018.1441240
DOI: https://doi.org/10.14733/cadconfP.2017.400-404
Google Scholar
McAtamney, L., & Corlett, E. N. (1993). RULA: a survey method for the investigation of workrelated upper limb disorders. Applied Ergonomics, 24(2), 91–99.
DOI: https://doi.org/10.1016/0003-6870(93)90080-S
Google Scholar
Muszyński, Z. (2016). Rozwój ergonomii w Polsce i na świecie. Zeszyty Naukowe Małopolskiej Wyższej Szkoły Ekonomicznej w Tarnowie, 29(1), 87–100.
Google Scholar
Nowacka, W. Ł. (2010). Ergonomia i ergonomiczne projektowanie stanowisk pracy. Materiały dydaktyczne dla słuchaczy Studiów Podyplomowych „Bezpieczeństwo i ochrona człowieka w środowisku pracy i ergonomia”. Warszawa: Wydawnictwo Politechniki Warszawskiej.
Google Scholar
Slamková, E., Dulina, L., & Tabaková, M. (2010). Ergonómiwa v priemysle. Žilina: GEORG knihárstvo, tlačiareň.
Google Scholar
Zielińska, A., & Kurczyk, D. (2011). Wybrane narzędzie ergonomiczne w środowisku Delmia, Modele inżynierii teleinformatyki (Wybrane zastosowania) 6 (pp. 95–106). Koszalin: Wydawnictwo Uczelniane Politechniki Koszalińskiej.
Google Scholar
Authors
Damian KOLNYdkolny@ath.bielsko.pl
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Dawid KURCZYKUniversity of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Józef MATUSZEKUniversity of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Statistics
Abstract views: 168PDF downloads: 31
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Damian KOLNY, Dorota WIĘCEK, Paweł ZIOBRO, Martin KRAJČOVIČ, APPLICATION OF A COMPUTER TOOL MONITORING SYSTEM IN CNC MACHINING CENTRES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Józef MATUSZEK, Tomasz SENETA, Aleksander MOCZAŁA, FUZZY ASSESSMENT OF MANUFACTURABILITY DESIGN FOR MACHINING , Applied Computer Science: Vol. 15 No. 3 (2019)
Similar Articles
- Leszek JASKIERNY, REVIEW OF THE DATA MODELING STANDARDS AND DATA MODEL TRANSFORMATION TECHNIQUES , Applied Computer Science: Vol. 14 No. 4 (2018)
- Paweł BAŁON, Edward REJMAN, Bartłomiej KIEŁBASA, Janusz SZOSTAK, Robert SMUSZ, NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE STRENGTH OF TANKS DEDICATED TO HOT UTILITY WATER , Applied Computer Science: Vol. 14 No. 4 (2018)
- Irena NOWOTYŃSKA, Stanisław KUT, COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION , Applied Computer Science: Vol. 14 No. 4 (2018)
- Marian JANCZAREK, COMPUTER MODELLING OF THERMAL TECHNICAL SPACESS IN ASPECT OF HEAT TRANSFER THROUGH THE WALLS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Damian KRASKA, Tomasz TRZEPIECIŃSKI, FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Grzegorz KŁOSOWSKI, Tomasz KLEPKA, Agnieszka NOWACKA, NEURAL CONTROLLER FOR THE SELECTION OF RECYCLED COMPONENTS IN POLYMER-GYPSY MORTARS , Applied Computer Science: Vol. 14 No. 2 (2018)
- Anna CZARNECKA, Łukasz SOBASZEK, Antoni ŚWIĆ, 2D IMAGE-BASED INDUSTRIAL ROBOT END EFFECTOR TRAJECTORY CONTROL ALGORITHM , Applied Computer Science: Vol. 14 No. 1 (2018)
- Sebastian CYGAN, Barbara BOROWIK, Bohdan BOROWIK, STREET LIGHTS INTELLIGENT SYSTEM, BASED ON THE INTERNET OF THINGS CONCEPT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Jarosław WIKAREK, Paweł SITEK, Mieczysław JAGODZIŃSKI, A DECLARATIVE APPROACH TO SHOP ORDERS OPTIMIZATION , Applied Computer Science: Vol. 15 No. 4 (2019)
- Aneta KARASEK, IT TOOLS SUPPORTING EMPLOYEE MANAGEMENT IN A HIGH-TECH ENTERPRISE , Applied Computer Science: Vol. 15 No. 1 (2019)
You may also start an advanced similarity search for this article.
