STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR
Rafał KLIZA
r.kliza@pollub.pl* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin (Poland)
Karol ŚCISŁOWSKI
* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin (Poland)
Ksenia SIADKOWSKA
* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin (Poland)
Jacek PADYJASEK
Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin (Poland)
Mirosław WENDEKER
Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin (Poland)
Abstract
This paper investigates the strenght of a conceptual main rotor blade dedicated to an unmanned helicopter. The blade is made of smart materials in order to optimize the efficiency of the aircraft by increasing its aerodynamic performance. This purpose was achieved by performing a series of strength calculations for the blade of a prototype main rotor used in an unmanned helicopter. The calculations were done with the Finite Element Method (FEM) and software like CAE (Computer-Aided Engineering) which uses advanced techniques of computer modeling of load in composite structures. Our analysis included CAD (Computer-Aided Design) modeling the rotor blade, importing the solid model into the CAE software, defining the simulation boundary conditions and performing strength calculations of the blade spar for selected materials used in aviation, i.e. fiberglass and carbon fiber laminate. This paper presents the results and analysis of the numerical calculations.
Keywords:
FEM, composite spar, main rotor blade, carbon fiber, strength analysisReferences
Azad, S., Mirghaderi, S. R., & Epackachi, S. (2021). Numerical investigation of steel and composite beam-toencased composite column connection via a through-plate. Structures, 31(December 2020), 14–28. https://doi.org/10.1016/j.istruc.2021.01.040
DOI: https://doi.org/10.1016/j.istruc.2021.01.040
Google Scholar
Balaskó, M., Sváb, E., Molnár, G., & Veres, I. (2005). Classification of defects in honeycomb composite structure of helicopter rotor blades. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 542(1–3), 45–51. https://doi.org/10.1016/j.nima.2005.01.010
DOI: https://doi.org/10.1016/j.nima.2005.01.010
Google Scholar
Debski, H., Rozylo, P., & Wysmulski, P. (2020). Stability and load-carrying capacity of short open-section composite columns under eccentric compression loading. Composite Structures, 252, 112716. https://doi.org/10.1016/j.compstruct.2020.112716
DOI: https://doi.org/10.1016/j.compstruct.2020.112716
Google Scholar
Grodzki, W., Łukasiewicz, A., & Leśniewska, K. (2015). Modelling of UAV’S Composite Structures and Prediction of Safety Factor. Applied Computer Science, 11(3), 67–75.
Google Scholar
Jaafar, M., Makich, H., & Nouari, M. (2021). A new criterion to evaluate the machined surface quality of the Nomex® honeycomb materials. Journal of Manufacturing Processes, 69, 567–582. https://doi.org/10.1016/j.jmapro.2021.07.062
DOI: https://doi.org/10.1016/j.jmapro.2021.07.062
Google Scholar
Kang, Z., Shi, Z., Lei, Y., Xie, Q., & Zhang, J. (2021). Effect of the surface morphology on the bonding performance of metal/composite hybrid structures. International Journal of Adhesion and Adhesives, 111, 102944. https://doi.org/10.1016/j.ijadhadh.2021.102944
DOI: https://doi.org/10.1016/j.ijadhadh.2021.102944
Google Scholar
Karny, M. (2017). The influence of the fastener hole preparation method on the fastener pull-through process in a carbon composite. Transactions on Aerospace Research, 1(246), 45–53. https://doi.org/10.2478/tar2017-0005
DOI: https://doi.org/10.2478/tar-2017-0005
Google Scholar
Klochkov, N., Zverkov, I., Kurlaev, N., & Ahmed, M. S. (2021). Improvement of non-destructive testing methods in diagnostics of composite honeycomb structures of civil aircraft. AIP Conference Proceedings, 2402, 020045. https://doi.org/10.1063/5.0071712
DOI: https://doi.org/10.1063/5.0071712
Google Scholar
Li, X., Wang, B., Xu, D., Wang, B., Dong, W., & Li, M. (2021). Super-high bonding strength of polyphenylene sulfide-aluminum alloy composite structure achieved by facile molding methods. Composites Part B: Engineering, 224, 109204. https://doi.org/10.1016/j.compositesb.2021.109204
DOI: https://doi.org/10.1016/j.compositesb.2021.109204
Google Scholar
Megson, T. H. G. (2010). Introduction to Aircraft Structural Analysis. In Introduction to Aircraft Structural Analysis. Elsevier. https://doi.org/10.1016/C2009-0-62169-3
DOI: https://doi.org/10.1016/C2009-0-62169-3
Google Scholar
Michalski, M., & Krauze, W. (2019). Influence of honeycomb core stabilization on composite sandwich structure geometry. Transactions on Aerospace Research, 3(256), 1–13. https://doi.org/10.2478/tar-2019-0013
DOI: https://doi.org/10.2478/tar-2019-0013
Google Scholar
Peng, X. L., & Bargmann, S. (2021). A novel hybrid-honeycomb structure: Enhanced stiffness, tunable auxeticity and negative thermal expansion. International Journal of Mechanical Sciences, 190, 106021. https://doi.org/10.1016/j.ijmecsci.2020.106021
DOI: https://doi.org/10.1016/j.ijmecsci.2020.106021
Google Scholar
Puchała, K., Jachimowicz, J., & Szymczyk, E. (2014). Analysis of load transfer into composite structure. Applied Computer Science, 10, 86–94.
Google Scholar
Rasuo, B. (2011). Experimental Techniques for Evaluation of Fatigue Characteristics of Laminated Constructions from Composite Materials: Full-Scale Testing of the Helicopter Rotor Blades. Journal of Testing and Evaluation, 39(2), 237–242. https://doi.org/10.1520/JTE102768
DOI: https://doi.org/10.1520/JTE102768
Google Scholar
Rathod, S., Tiwari, G., & Chougale, D. (2019). Ballistic performance of ceramic-metal composite structures. Materials Today: Proceedings, 41, 1125–1129. https://doi.org/10.1016/j.matpr.2020.08.759
DOI: https://doi.org/10.1016/j.matpr.2020.08.759
Google Scholar
Różyło, P., & Wrzesińska, K. (2016). Numerical Analysis of Buckling and Critical Forces in a Closed Section Composite Profile. Applied Computer Science, 12(2), 54–62.
Google Scholar
Shahani, A. R., & Mohammadi, S. (2015). Damage tolerance approach for analyzing a helicopter main rotor blade. Engineering Failure Analysis, 57, 56–71. https://doi.org/10.1016/j.engfailanal.2015.07.025
DOI: https://doi.org/10.1016/j.engfailanal.2015.07.025
Google Scholar
Siadkowska, K., & Borowiec, P. (2021). Strength analysis of the conceptual model of a main rotor blade spar with actuators. Journal of Physics: Conference Series, 1736(1), 012021. https://doi.org/10.1088/1742-6596/1736/1/012021
DOI: https://doi.org/10.1088/1742-6596/1736/1/012021
Google Scholar
Skiba, K. (2019). Designing and FEM simulation of the helicopter rotor and hub. IOP Conference Series: Materials Science and Engineering, 710, 012003. https://doi.org/10.1088/1757-899X/710/1/012003
DOI: https://doi.org/10.1088/1757-899X/710/1/012003
Google Scholar
Skiba, K., Raczynski, R., Kliza, R., & Wendeker, M. (2021). Strength analysis of a propulsion shaft dedicated for the main rotor test bench. Journal of Physics: Conference Series, 1736(1), 012052. https://doi.org/10.1088/1742-6596/1736/1/012052
DOI: https://doi.org/10.1088/1742-6596/1736/1/012052
Google Scholar
Sukmaji, I. C., Wijang, W. R., Andri, S., Bambang, K., & Teguh, T. (2017). Application of sandwich honeycomb carbon/glass fiber-honeycomb composite in the floor component of electric car. AIP Conference Proceedings, 1788, 030056. https://doi.org/10.1063/1.4968309
DOI: https://doi.org/10.1063/1.4968309
Google Scholar
Szymański, R. (2020). Non-destructive testing of thermoplastic carbon composite structures. Transactions on Aerospace Research, 1(258), 34–52. https://doi.org/10.2478/tar-2020-0003
DOI: https://doi.org/10.2478/tar-2020-0003
Google Scholar
Taymaz, H. A. (2017). Optimization of Composite Couplings in Helicopter Rotor Blade Spar Using Hybrid Particle Swarm-Gradient Algorithm. Bilge, 1(2), 71–78.
Google Scholar
Teter, A., & Gawryluk, J. (2016). Experimental modal analysis of a rotor with active composite blades. Composite Structures, 153, 451–467. https://doi.org/10.1016/j.compstruct.2016.06.013
DOI: https://doi.org/10.1016/j.compstruct.2016.06.013
Google Scholar
Visweswaraiah, S. B., Ghiasi, H., Pasini, D., & Lessard, L. (2013). Multi-objective optimization of a composite rotor blade cross-section. Composite Structures, 96, 75–81. https://doi.org/10.1016/j.compstruct.2012.09.031
DOI: https://doi.org/10.1016/j.compstruct.2012.09.031
Google Scholar
Waghmare, S., Shelare, S., Aglawe, K., & Khope, P. (2021). Materials Today: Proceedings A mini review on fibre reinforced polymer composites. Materials Today: Proceedings, in press. https://doi.org/10.1016/j.matpr.2021.10.379
DOI: https://doi.org/10.1016/j.matpr.2021.10.379
Google Scholar
Wysmulski, P., Debski, H., & Falkowicz, K. (2020). Stability analysis of laminate profiles under eccentric load. Composite Structures, 238, 111944. https://doi.org/10.1016/j.compstruct.2020.111944
DOI: https://doi.org/10.1016/j.compstruct.2020.111944
Google Scholar
Authors
Rafał KLIZAr.kliza@pollub.pl
* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin Poland
Authors
Karol ŚCISŁOWSKI* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin Poland
Authors
Ksenia SIADKOWSKA* Lublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin Poland
Authors
Jacek PADYJASEKLublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin Poland
Authors
Mirosław WENDEKERLublin University of Technology, Faculty of Mechanical Engineering, Department od Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin Poland
Statistics
Abstract views: 447PDF downloads: 162
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Tomasz BULZAK, Zbigniew PATER, Janusz TOMCZAK, NEW EXTRUSION PROCESS FOR PRODUCING TWIST DRILLS USING SPLIT DIES , Applied Computer Science: Vol. 13 No. 3 (2017)
- Jacek CABAN, Grzegorz LITAK, Bartłomiej AMBROŻKIEWICZ, Leszek GARDYŃSKI, Paweł STĄCZEK, Piotr WOLSZCZAK, IMPACT-BASED PIEZOELECTRIC ENERGY HARVESTING SYSTEM EXCITED FROM DIESEL ENGINE SUSPENSION , Applied Computer Science: Vol. 16 No. 3 (2020)
- Wieslaw FRĄCZ, Grzegorz JANOWSKI, INFLUENCE OF HOMOGENIZATION METHODS IN PREDICTION OF STRENGTH PROPERTIES FOR WPC COMPOSITES , Applied Computer Science: Vol. 13 No. 3 (2017)
- Anna MACHROWSKA, Robert KARPIŃSKI, Przemysław KRAKOWSKI, Józef JONAK, DIAGNOSTIC FACTORS FOR OPENED AND CLOSED KINEMATIC CHAIN OF VIBROARTHROGRAPHY SIGNALS , Applied Computer Science: Vol. 15 No. 3 (2019)
- Hamid JAN, Beena HAMID, THE APPLICATION OF FINGERPRINTS AUTHENTICATION IN DISTANCE EDUCATION , Applied Computer Science: Vol. 15 No. 3 (2019)
- Sebastian BIAŁASZ, INJECTION SIMULATION FOR THE MOLD PROCESS IN THE MEDICAL INDUSTRY , Applied Computer Science: Vol. 14 No. 3 (2018)
- Damian KRASKA, Tomasz TRZEPIECIŃSKI, FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Ali Fattah DAKHIL, Weffa Muhammed ALI, Ali Atshan Abdul REDA, PRIORITIZING SOFTWARE CAPABILITIES AND FOCAL POINTS OF MS ACCESS AND EXCEL IN PERSPECTIVE OF DATA MANAGEMENT , Applied Computer Science: Vol. 14 No. 3 (2018)
- Behnaz ESLAMI, Mehdi HABIBZADEH MOTLAGH, Zahra REZAEI, Mohammad ESLAMI, Mohammad AMIN AMINI, UNSUPERVISED DYNAMIC TOPIC MODEL FOR EXTRACTING ADVERSE DRUG REACTION FROM HEALTH FORUMS , Applied Computer Science: Vol. 16 No. 1 (2020)
- Marcin TOMCZYK, Barbara BOROWIK, Bohdan BOROWIK, IDENTIFICATION OF THE MASS INERTIA MOMENT IN AN ELECTROMECHANICAL SYSTEM BASED ON WAVELET–NEURAL METHOD , Applied Computer Science: Vol. 14 No. 2 (2018)
<< < 4 5 6 7 8 9 10 11 12 > >>
You may also start an advanced similarity search for this article.
