STABILITY AND FAILURE OF THIN-WALLED COMPOSITE STRUCTURES WITH A SQUARE CROSS-SECTION
Błażej CZAJKA
blazej.czajka@pollub.edu.plLublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin (Poland)
Patryk RÓŻYŁO
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin (Poland)
Hubert DĘBSKI
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin (Poland)
Abstract
This paper is devoted to the analysis of the stability and load-carrying capacity of thin-walled composite profiles in compression. The specimens reflect elements made of carbon fibre reinforced laminate (CFRP). Thin-walled columns with a square crosssection were made from 4 layers of composite in 3 different combinations of layer arrangements. Advanced numerical analyses have been carried out. In the first stage of the study, a buckling analysis of the structure was performed. In further numerical simulations, two advanced models were used simultaneously: the Progressive Failure Analysis (PFA) and the Cohesive Zone Model (CZM). The results showed significant differences between the critical load values for each layer configuration. The forms of buckling and the areas of damage initiation and evolution were also dependent on the applied layup.
Keywords:
finite element method (FEM), post-buckling, progressive failure analysis (PFA), delamination, cohesive zone model (CZM)References
Abrate, S. (1998). Impact on Composite Structures. Cambridge University Press.
DOI: https://doi.org/10.1017/CBO9780511574504
Google Scholar
Berardi, V. P., Perrella, M., Feo, L., & Cricri, G. (2017). Creep behavior of GFRP laminates and their phases: Experimental investigation and analytical modelling. Composites Part B: Engineering, 122, 136–144. https://doi.org/10.1016/j.compositesb.2017.04.015
DOI: https://doi.org/10.1016/j.compositesb.2017.04.015
Google Scholar
Camanho, P. P., & Matthews, F. L. (1999). A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates. Journal of Composite Materials, 33(24), 2248–2280. https://doi.org/10.1177%2F002199839903302402
DOI: https://doi.org/10.1177/002199839903302402
Google Scholar
Campbell, F. C. (2004). Manufacturing Processes for Advanced Composites. Elsevier B.V.
Google Scholar
Campbell, F. C. (2006). Manufacturing Technology for Aerospace Structural Materials. Elsevier Ltd.
DOI: https://doi.org/10.1016/B978-185617495-4/50011-1
Google Scholar
Chung, D. D. L. (1994). Carbon Fiber Composites. Elsevier Inc.
DOI: https://doi.org/10.1016/B978-0-08-050073-7.50012-9
Google Scholar
Debski, H., Rozylo, P., Gliszczynski, A., & Kubiak, T. (2019). Numerical models for buckling, postbuckling and failure analysis of pre-damaged thin-walled composite struts subjected to uniform compression. ThinWalled Structures, 139, 53–65. https://doi.org/10.1016/j.tws.2019.02.030
DOI: https://doi.org/10.1016/j.tws.2019.02.030
Google Scholar
Debski, H., Teter, A., Kubiak, T., & Samborski, S. (2016). Local buckling, post-buckling and collapse of thinwalled channel section composite columns subjected to quasi-static compression. Composite Structures, 136, 593–601. https://doi.org/10.1016/j.compstruct.2015.11.008
DOI: https://doi.org/10.1016/j.compstruct.2015.11.008
Google Scholar
Falkowicz, K., Mazurek, P., Rozylo, P., Wysmulski, P., & Smagowski, W. (2016). Experimental and numerical analysis of the compression thin-walled composite plate. Advances in Science and Technology Research Journal, 10(31), 177–184. https://doi.org/10.12913/22998624/64063
DOI: https://doi.org/10.12913/22998624/64063
Google Scholar
Fascetti, A., Feo, L., Nisticò, N., & Penna, R. (2016). Web-flange behavior of pultruded GFRP I-beams: A lattice model for the interpretation of experimental results. Composites Part B: Engineering, 100, 257–269. https://doi.org/10.1016/j.compositesb.2016.06.058
DOI: https://doi.org/10.1016/j.compositesb.2016.06.058
Google Scholar
Freeman, W. T. (1993). The use of composites in aircraft primary structure. Composites Engineering, 3(7–8), 767–775. https://doi.org/10.1016/0961-9526(93)90095-2
DOI: https://doi.org/10.1016/0961-9526(93)90095-2
Google Scholar
Koiter, W. (1963). Elastic Stability and Post Buckling Behavior in Nonlinear Problems. University of Wisconsin Press.
Google Scholar
Kubiak, T., Kolakowski, Z., Swinarski, J., Urbaniak, M., & Gliszczynski, A. (2016). Local buckling and postbuckling of composite channel-section beams – Numerical and experimental investigations. Composites Part B: Engineering, 91, 176–188. https://doi.org/10.1016/j.compositesb.2016.01.053
DOI: https://doi.org/10.1016/j.compositesb.2016.01.053
Google Scholar
Lapczyk, I., & Hurtado, J. A. (2007). Progressive damage modeling in fiber-reinforced materials. Composites Part A: Applied Science and Manufacturing, 38(11), 2333–2341. https://doi.org/10.1016/j.compositesa.2007.01.017
DOI: https://doi.org/10.1016/j.compositesa.2007.01.017
Google Scholar
Liu, P. F., Gu, Z. P., Peng, X. Q., & Zheng, J. Y. (2015). Finite element analysis of the influence of cohesive law parameters on the multiple delamination behaviors of composites under compression. Composite Structures, 131, 975–986. https://doi.org/10.1016/j.compstruct.2015.06.058
DOI: https://doi.org/10.1016/j.compstruct.2015.06.058
Google Scholar
Paszkiewicz, M., & Kubiak, T. (2015). Selected problems concerning determination of the buckling load of channel section beams and columns. Thin-Walled Structures, 93, 112–121. https://doi.org/10.1016/j.tws.2015.03.009
DOI: https://doi.org/10.1016/j.tws.2015.03.009
Google Scholar
Rozylo, P., Debski, H., Wysmulski, P., & Falkowicz, K. (2018). Numerical and experimental failure analysis of thin-walled composite columns with a top-hat cross section under axial compression. Composite Structures, 204, 207–216. https://doi.org/10.1016/j.compstruct.2018.07.068
DOI: https://doi.org/10.1016/j.compstruct.2018.07.068
Google Scholar
Singer, J., Arbocz, J., & Weller, T. (1998). Buckling Experiments: Experimental Methods in Buckling of ThinWalled Structures, Volume 1: Basic Concepts, Columns, Beams and Plates. John Wiley & Sons Inc.
Google Scholar
Wysmulski, P., Debski, H., Rozylo, P., & Falkowicz, K. (2016). A study of stability and post-critical behaviour of thin-walled composite profiles under compression. Eksploatacja i Niezawodnosc-Maintenance and Reliability, 18(4), 632–637. http://dx.doi.org/10.17531/ein.2016.4.19
DOI: https://doi.org/10.17531/ein.2016.4.19
Google Scholar
Authors
Błażej CZAJKAblazej.czajka@pollub.edu.pl
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin Poland
Authors
Patryk RÓŻYŁOLublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin Poland
Authors
Hubert DĘBSKILublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin Poland
Statistics
Abstract views: 315PDF downloads: 81
License
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Nasir A. Al-Awad, Izz K. Abboud, Muaayed F. Al-Rawi, GENETIC ALGORITHM-PID CONTROLLER FOR MODEL ORDER REDUCTION PANTOGRAPHCATENARY SYSTEM , Applied Computer Science: Vol. 17 No. 2 (2021)
- Tilla IZSÁK, László MARÁK, Mihály ORMOS, EVALUATION OF SUPPORT VECTOR MACHINE BASED STOCK PRICE PREDICTION , Applied Computer Science: Vol. 19 No. 3 (2023)
- Maria CORDENTE-RODRIGUEZ, Simone SPLENDIANI, Patrizia SILVESTRELLI, MEASURING PROPENSITY OF ONLINE PURCHASE BY USING THE TAM MODEL: EVIDENCE FROM ITALIAN UNIVERSITY STUDENTS , Applied Computer Science: Vol. 16 No. 2 (2020)
- Mouna TARIK, Ayoub MNIAI, Khalid JEBARI, HYBRID FEATURE SELECTION AND SUPPORT VECTOR MACHINE FRAMEWORK FOR PREDICTING MAINTENANCE FAILURES , Applied Computer Science: Vol. 19 No. 2 (2023)
- Ihor PYSMENNYI, Anatolii PETRENKO, Roman KYSLYI, GRAPH-BASED FOG COMPUTING NETWORK MODEL , Applied Computer Science: Vol. 16 No. 4 (2020)
- Daniel HALIKOWSKI, Justyna PATALAS-MALISZEWSKA, Małgorzata SKRZESZEWSKA, A MODEL FOR ASSESSING THE LEVEL OF AUTOMATION OF A MAINTENANCE DEPARTMENT USING ARTIFICIAL NEURAL NETWORK , Applied Computer Science: Vol. 14 No. 4 (2018)
- Robert KARPIŃSKI, Anna MACHROWSKA, Marcin MACIEJEWSKI, APPLICATION OF ACOUSTIC SIGNAL PROCESSING METHODS IN DETECTING DIFFERENCES BETWEEN OPEN AND CLOSED KINEMATIC CHAIN MOVEMENT FOR THE KNEE JOINT , Applied Computer Science: Vol. 15 No. 1 (2019)
- Stanisław SKULIMOWSKI, Jerzy MONTUSIEWICZ, Marcin BADUROWICZ, ENHANCING THE EFFICIENCY OF THE LEVENSHTEIN DISTANCE BASED HEURISTIC METHOD OF ARRANGING 2D APICTORIAL ELEMENTS FOR INDUSTRIAL APPLICATIONS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Grzegorz SUCHANEK, Roman FILIPEK, COMPUTATIONAL FLUID DYNAMICS (CFD) AIDED DESIGN OF A MULTI-ROTOR FLYING ROBOT FOR LOCATING SOURCES OF PARTICULATE MATTER POLLUTION , Applied Computer Science: Vol. 18 No. 3 (2022)
- Irena NOWOTYŃSKA, Stanisław KUT, COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION , Applied Computer Science: Vol. 14 No. 4 (2018)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.