NUMERICAL AND EXPERIMENTAL ANALYSIS OF A CENTRIFUGAL PUMP WITH DIFFERENT ROTOR GEOMETRIES
Łukasz SEMKŁO
Poznan University of Technology, Institute of Thermal Energy, Faculty of Environmental Engineering and Energy, Poznan (Poland)
Łukasz GIERZ
lukasz.gierz@put.poznan.plPoznan University of Technology, Institute of Machine Design, Faculty of Mechanical Engineering, Poznan, (Poland)
Abstract
The paper presents a comparative analysis of the operation of two variants of centrifugal pump rotors, a description of the main parameters, and the influence of the blade geometry on the performance characteristics obtained. Rotors have been designed using the arc and point method. Based on the developed 3D CAD models, the rotors were printed using the rapid prototyping method on a 3D printer in FFF (Fused Filament Fabrication) technology, in order to experimentally verify the performance, by placing them on the Armfield FM50 test stand. The analysis part of the CFD includes a fluid flow in Ansys Fluent. The process of creating a flow domain and generating a structural mesh was described, along with the definition of boundary conditions, the definition of physical conditions and the turbulence model. The distribution of pressures and velocities in the meridional sections is shown graphically. The chapter with the experimental analysis contains a description of the measuring stand and the methodology used. The results obtained made it possible to generate the characteristics, making it possible to compare the results received. The results allowed to note the influence of geometry on the behavior of the rotors during operation in the system and to indicate that the arc rotor gets a 7% higher head and 2% higher efficiency than the point method rotor, which gives the basis for its commercial use in industry.
Keywords:
pump, CFD, the head of the pump, power, efficiencyReferences
Anderson, H. (1980). Centrifugal Pumps. Trade and Technical Press
Google Scholar
Barmaki, R., & Ehghaghi, M. (2019). Experimental Investigation of a Centrifugal Pump Hydraulic Performance in Hydraulic Transmission of Solids. Mechanics and Mechanical Engineering, 23(1), 259–270. http//doi.org/10.2478/mme-2019-0035
DOI: https://doi.org/10.2478/mme-2019-0035
Google Scholar
Bosioc, A., Moș, D., Draghici, I., Muntean, S., &Anton, L. E. (2019). Experimental analysis of a pump equipped with an axial rotor with variable speed. IOP Conference Series: Earth and Environmental Science, 240, 032021. https://doi.org/10.1088/1755-1315/240/3/032021
DOI: https://doi.org/10.1088/1755-1315/240/3/032021
Google Scholar
Cengel, Y., & Cimbala, J. (2013). Fluid Mechanics Fundamentals and Applications. McGraw Hill.
Google Scholar
Cheah, K., Lee, T., Winoto, S., & Zhao, Z. (2007). Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions. International Journal of Rotating Machinery, 2007, 083641. http://doi.org/10.1155/2007/83641
DOI: https://doi.org/10.1155/2007/83641
Google Scholar
Ciałkowski, M., Brodzik, Ł., Wróblewska, A., Frąckowiak, A., Bartoszewicz, J., Joachmiak, M., & Semkło, Ł. (2015). Mechanika płynów – zbiór zadań z rozwiązaniami. Wydawnictwo Politechniki Poznańskiej.
Google Scholar
Ciocan, G., & Kueny, J.-L. (2006). Experimental Analysis of the Rotor-Stator Interaction in a Pump-Turbine. 23rd IAHR Symposium on Hydraulic Machinery and Systems. Yokohama, Japan.
Google Scholar
Fan, H., & Piao, Y. (2017). Cooling design of an aero-engine fuel centrifugal pump at shut-off. Advances in Mechanical Engineering, 9(6). http://doi.org/10.1177/1687814017709700
DOI: https://doi.org/10.1177/1687814017709700
Google Scholar
Jędral, W. (2001). Pompy wirowe. Wydawnictwo Naukowe PWN.
Google Scholar
Kaczmarczyk, T., Ihnatowicz, E., Żywica, G., & Kaniecki, M. (2019). Experimental study of the prototype of a Roto-Jet pump for the domestic ORC power plant. Archives of thermodynamics, 40(3), 83–108. http://doi.org/10.24425/ather.2019.129995
Google Scholar
Kijewski, J. (1993). Maszynoznawstwo. Wydawnictwo Szkolne i Pedagogiczne
Google Scholar
Li, W., Ji, L., Shi, W., Yang, Y., Awais, M., Wang, Y., & Xu, X. (2020). Correlation research of rotor–stator interaction and shafting vibration in a mixed-flow pump. Journal of Low Frequency Noise, Vibration and Active Control, 39(1), 72–83. http://doi.org/10.1177/1461348419836530
DOI: https://doi.org/10.1177/1461348419836530
Google Scholar
Mousmoulis, G., Kassanos, I., Aggidis, G., & Anagnostopoulos, I. (2021). Numerical simulation of the performance of a centrifugal pump with a semi-open impeller under normal and cavitating conditions. Applied Mathematical Modelling, 89(2), 1814–1834. https://doi.org/10.1016/j.apm.2020.08.074
DOI: https://doi.org/10.1016/j.apm.2020.08.074
Google Scholar
Polish Standard PN-90/M-44000. Przenośniki cieczy.
Google Scholar
Song, H., Zhang, J., & Zhang, F. (2022). Rotor strength and critical speed analysis of a vertical long shaft fire pump connected with different shaft lengths. Scientific reports, 12, 9351. https://doi.org/10.1038/s41598-022-13320-z
DOI: https://doi.org/10.1038/s41598-022-13320-z
Google Scholar
Steinbrecher, Ch., Skoda, R., Schilling, R., Müller, N., Breitenbach, A., & Mendler, N. (2003). Numerical Simulation of a Self-Stabilizing Rotor of a Centrifugal Pump. Proceedings of the ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference (pp. 71–78). ASME. http://doi.org/10.1115/FEDSM2003-45468
DOI: https://doi.org/10.1115/FEDSM2003-45468
Google Scholar
Troskolański, A. T. (1973). Pompy wirowe. Wydawnictwo Naukowo-Techniczne.
Google Scholar
Zhu, L., Yuan, S., Yuan, J., Zhou, J., Jin, R., & Wang, H. (2011). Numerical simulation for rotor-stator interaction of centrifugal pump with different tongues. Journal of Agricultural Engineering, 27(10), 50–55. http://doi.org/:10.3969/ j.issn.1002-6819.2011.10.009
Google Scholar
Authors
Łukasz SEMKŁOPoznan University of Technology, Institute of Thermal Energy, Faculty of Environmental Engineering and Energy, Poznan Poland
Authors
Łukasz GIERZlukasz.gierz@put.poznan.pl
Poznan University of Technology, Institute of Machine Design, Faculty of Mechanical Engineering, Poznan, Poland
Statistics
Abstract views: 155PDF downloads: 145
License
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Pornsiri KHUMLA, Kamthorn SARAWAN, IMPROVING MATERIAL REQUIREMENTS PLANNING THROUGH WEB-BASED: A CASE STUDY THAILAND SMEs , Applied Computer Science: Vol. 19 No. 4 (2023)
- Krzysztof Michalczyk, Mariusz Warzecha, Robert Baran, A NEW METHOD FOR GENERATING VIRTUAL MODELS OF NONLINEAR HELICAL SPRINGS BASED ON A RIGOROUS MATHEMATICAL MODEL , Applied Computer Science: Vol. 19 No. 2 (2023)
- Mohanad ABDULHAMID, Otieno ODONDI, Muaayed AL-RAWI, COMPUTER VISION BASED ON RASPBERRY PI SYSTEM , Applied Computer Science: Vol. 16 No. 4 (2020)
- Aneta KARASEK, IT TOOLS SUPPORTING EMPLOYEE MANAGEMENT IN A HIGH-TECH ENTERPRISE , Applied Computer Science: Vol. 15 No. 1 (2019)
- Workineh TESEMA, INEFFICIENCY OF DATA MINING ALGORITHMS AND ITS ARCHITECTURE: WITH EMPHASIS TO THE SHORTCOMING OF DATA MINING ALGORITHMS ON THE OUTPUT OF THE RESEARCHES , Applied Computer Science: Vol. 15 No. 3 (2019)
- Edyta ŁUKASIK, Emilia ŁABUĆ, ANALYSIS OF THE POSSIBILITY OF USING THE SINGULAR VALUE DECOMPOSITION IN IMAGE COMPRESSION , Applied Computer Science: Vol. 18 No. 4 (2022)
- Paweł MAGRYTA, AERODYNAMIC RESEARCH OF THE OVERPRESSURE DEVICE FOR INDIVIDUAL TRANSPORT , Applied Computer Science: Vol. 13 No. 1 (2017)
- Wieslaw FRĄCZ, Grzegorz JANOWSKI, INFLUENCE OF HOMOGENIZATION METHODS IN PREDICTION OF STRENGTH PROPERTIES FOR WPC COMPOSITES , Applied Computer Science: Vol. 13 No. 3 (2017)
- Katarzyna ORZECHOWSKA, Tymon RUBEL, Robert KURJATA, Krzysztof ZAREMBA, A DISTRIBUTED ALGORITHM FOR PROTEIN IDENTIFICATION FROM TANDEM MASS SPECTROMETRY DATA , Applied Computer Science: Vol. 18 No. 2 (2022)
You may also start an advanced similarity search for this article.