Operation of a steel-concrete composite beam considering slab cracking

Marek Łagoda


Road and Bridge Research Institute (Poland)

Krzysztof Śledziewski


Department of Roads and Bridges; Faculty of Civil Engineering and Architecture; Lublin University of Technology (Poland)
https://orcid.org/0000-0003-3022-8105

Abstract

The theme of the paper is the effect of scratching of reinforced concrete slab on the work of a steel-concrete composite beam. The paper evaluates the state of knowledge in the field of composite structures, in particular, statically indeterminate structures with concrete in tension zones. Additionally, in a nutshell, it describes the current practice of design. Moreover, experimental studies were described on continuous beams that were made by the authors. A proposal for further work on this topic was also presented.


Keywords:

composite beam, scratch, Eurocode, laboratory tests

Aribert J. M., Raoul J., Terpereau O. Test and Analyses of a Bridge Continuous Beam. Conference Report: Composite Construction - Conventional and Innovative, Innsbruck, 1997.
  Google Scholar

Barańczak J., Bryś G. Wpływ podatności złącz na stan przemieszczeń i naprężenia w belkach zespolonych. II Konferencja Konstrukcje Zespolone, Zielona Góra, (1989) 33-38.
  Google Scholar

Bujňák J. Navrhovanie oceľobetónových trámov. SvF Žilinska Univerzita, Žilina, 1997.
  Google Scholar

Bukowski B. Morfologia rys w konstrukcjach żelbetowych i betonowych. Archiwum Inżynierii Lądowej, Tom III, zeszyt 4, 1959.
  Google Scholar

Considér A. Influence des pressions latérales sur la resistence des solides a l'ecrasement. Le Génie Civil, nr 5, 1904.
  Google Scholar

Czudek H. Konstrukcje zespolone w mostownictwie metalowym. Wydawnictwo PW, Warszawa, 1969.
  Google Scholar

Czudek H. Stan wiedzy w zakresie konstrukcji zespolonych. V Konferencja Naukowa - Konstrukcje zespolone, Zielona Góra, (1999) 7-28.
  Google Scholar

Ducret J.-M., Lebet J.-P. Behaviour of Composite Bridges during Construction. Structural Engineering International, Vol. 9, No. 3, (1999) 212-218.
  Google Scholar

Furtak K. Mosty zespolone. Wydawnictwo Naukowe PWN, Warszawa – Kraków, 1999.
  Google Scholar

Furtak K., Łącki J. Analiza naprężeń termiczno – skurczowych w zespolonych belkach mostowych. Inżynieria i Budownictwo, nr 3, (1997) 155-158.
  Google Scholar

Furtak K., Musialik E. Analiza wybranych metod obliczania rozstawu i rozwarcia rys w belkach żelbetowych. Czasopismo Techniczne, nr 3-B, Wydawnictwo Politechniki Krakowskiej, 2001.
  Google Scholar

Godycki - Ćwirko T. Z badań nad rysami w zginanych elementach żelbetowych. Inżynieria i Budownictwo, nr 2, (1961)
  Google Scholar

Gómez Navarro M. Concrete cracking in the deck slabs of steel - concrete composite bridges. Thése No. 2268, École Polytechnique Fédérale de Lausanne, Lausanne, 2000.
  Google Scholar

Jarek B. Zarysowanie płyty żelbetowej w belkach zespolonych typu stal - beton. Praca doktorska, Politechnika Krakowska, Kraków, 2004.
  Google Scholar

Jarek B. Zarysowanie belek zespolonych typu stal - beton o zespoleniu niepełnym. Konferencja Konstrukcje Zespolone, T VIII, Zielona Góra, (2008) 149-158.
  Google Scholar

Johnson R. P. Composite Structures of Steel and Concrete. Beams, Columns, Trames and Application in Building. Grand Technical Books, London, 1975.
  Google Scholar

Karaś S. Sztywność na zginanie dźwigara zespolonego podatnie typu stal-beton. Mosty, nr 1, (2011) 32-38.
  Google Scholar

Karlikowski J. Ocena podatności zespolenia na podstawie badań mostu drogowego. II Konferencja Konstrukcje Zespolone, Zielona Góra, (1989) 89-95.
  Google Scholar

Karlikowski J., Madaj A., Wołowicki W. Badanie skutków zarysowania płyty w belkach zespolonych. Inżynieria i Budownictwo, nr 7, (2002) 381-383.
  Google Scholar

Kindmann R. Composite Girders, IABSE Short Course. IABSE reports, vol. 61, Brussels, 1990.
  Google Scholar

Kuczyński W. Konstrukcje betonowe. Kontynualna teoria zginania żelbetu. PWN, Warszawa, 1971.
  Google Scholar

Łagoda G., Łagoda M. Technologie stosowane przy budowie mostów zespolonych. II Konferencja Konstrukcje zespolone, Zielona Góra, (1989) 113-119.
  Google Scholar

Łagoda G., Łagoda M. Projektowanie mostów zespolonych w świetle PN-EN 1994 -2. Materiały Budowlane, Nr 4, (2010) 45-49.
  Google Scholar

Łagoda M. Podatność zespolenia w konstrukcjach mostowych. Prace Instytutu Badawczego Dróg i Mostów, Warszawa, Nr 2, 1980.
  Google Scholar

Łagoda M. Stan graniczny podatności łączników w mostowych konstrukcjach zespolonych. Praca doktorska, IBDiM, Warszawa, 1981.
  Google Scholar

Łagoda M., Śledziewski K. Wpływ zarysowania betonu na pracę belki zespolonej ciągłej typu stal – beton. Przegląd Spawalnictwa, nr 3, (2011) 31-35.
  Google Scholar

Łącki J. Nośność zespolenia żelbetowej płyty z dźwigarem stalowym. Maszynopis, Instytut Materiałów i Konstrukcji Budowlanych, Politechnika Krakowska, Kraków, 1998.
  Google Scholar

Madaj A. Sztywność giętna stalowo – betonowego przekroju zespolonego z rozciąganą częścią betonową. Konferencja Naukowo – Techniczna „Mosty Zespolone”, Kraków, (1998) 233-242.
  Google Scholar

Madaj A. Redystrybucja sił w ciągłej belce zespolonej stalowo – betonowej. V konferencja naukowa „Konstrukcje zespolone”, Zielona Góra, (1999) 169-180.
  Google Scholar

Madaj A. Sztywność zginania stalowo – betonowych belek zespolonych: teoria i badania. Zeszyty Naukowe Politechniki Poznańskiej. Budownictwo Lądowe, nr 45, (2001) 81-105.
  Google Scholar

Madaj A. Doraźna nośność i sztywność na zginanie zespolonych belek stalowo – betonowych. Wydawnictwo Politechniki Poznańskiej, Poznań, 2005.
  Google Scholar

Muraszow W.J. Trieszczinoustojcziwost, żestkost i procznost żeliezobetona. Maszstroizdat, 1950.
  Google Scholar

Pechar J., Bures J., Schindler A. Kovove mosty. SNTL, ALFA, Praha, 1990.
  Google Scholar

PN-EN 1994-2 Eurokod 4: Projektowanie konstrukcji zespolonych stalowo-betonowych. Część 2: Reguły ogólne i reguły dla mostów.
  Google Scholar

Saliger R. Der Stahlbetonbau. Verl. Deuticke, Wiedeń, 1956.
  Google Scholar


Published
2014-06-11

Cited by

Łagoda, M. and Śledziewski, K. (2014) “Operation of a steel-concrete composite beam considering slab cracking”, Budownictwo i Architektura, 13(2), pp. 265–274. doi: 10.35784/bud-arch.1904.

Authors

Marek Łagoda 

Road and Bridge Research Institute Poland

Authors

Krzysztof Śledziewski 

Department of Roads and Bridges; Faculty of Civil Engineering and Architecture; Lublin University of Technology Poland
https://orcid.org/0000-0003-3022-8105

Statistics

Abstract views: 188
PDF downloads: 111


License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.

Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.