Durability assessment of asphalt mixtures for waterproofing and pavement of bridges
Michał Sarnowski
Group of Materials and Road Technology; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
https://orcid.org/0000-0002-2908-7774
Piotr Radziszewski
Group of Materials and Road Technology; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
https://orcid.org/0000-0003-2835-0240
Jerzy Piłat
Group of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
Karol Kowalski
Group of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
https://orcid.org/0000-0002-9996-3637
Jan Król
Group of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology (Poland)
https://orcid.org/0000-0001-8728-3530
Abstract
Durability of bridge pavement is affected by two main factors: traffic conditions and environmental factors. In Central-European climate, in addition to traffic, a bridge pavement is loaded by low temperature and deicing agents. The bridge pavement can be constructed with either cement concrete or asphalt mixture technology. In Europe (including Poland) asphalt pavements are typically placed, composed with a surface and protection layer. Pavement is placed on the waterproofing layer after initial surface priming. Both protection and surface asphalt mixtures layers can lose their properties due to aging process or due to the water action. In this paper, the results of functional properties of asphalt mixtures testing used for protection and surface layers of bridge decks are presented. Tested mixtures were subjected to short term oven aging (STOA), long term oven aging (LTOA) and aging in high technological temperatures.
Keywords:
bridges, durability, pavement, waterproofing, asphalt mixturesReferences
Piłat J., Radziszewski P., Kowalski K.: Nawierzchnie asfaltowe i betonowe na obiektach mostowych. Seminarium „Nawierzchnie, izolacje i inne elementy wyposażenia mostów” Warszawa 2007, str. 49-52.
Google Scholar
Sarnowski M., Piłat J.: Wpływ nowej metody modyfikacji asfaltów drogowych kwasem polifosforowym na zmiany odporności na starzenie. Problemy naukowo-badawcze budownictwa. 56 Konferencja naukowa Komitetu Inżynierii Lądowej i Wodnej PAN i Komitetu Nauki PZITB "Krynica 2010". Wydawnictwo Politechniki Świętokrzyskiej w Kielcach 2010, str. 399-406
Google Scholar
Radziszewski P., Piłat J., Sarnowski M., Kowalski K., Król J., Pokorski P., Liphardt A., Stefańczyk B., Mieczkowski P.: Rozwiązania materiałowo-technologiczne izolacji i nawierzchni obiektów mostowych. Raport badawczy dla Generalnej Dyrekcji Dróg Krajowych i Autostrad. Warszawa 2013
Google Scholar
Sprinkel M. M. and Apeagyei A. K.: Evaluation of the Installation and Initial Condition of Overlays on Bridge Decks Rosphalt. Virginia Center for Transportation Innovation and Research. Final Report VCTIR 13-R5. June 2013.
Google Scholar
Hicks, R. Gary et. al.: Asphalt Surfaces on Steel Bridge Decks, TRR Record 1740, Paper No. 00-0389, Transportation Research Board, Washington DC, 2000.
DOI: https://doi.org/10.3141/1740-17
Google Scholar
Piłat J., Radziszewski P.: Nawierzchnie asfaltowe, WKŁ, Warszawa 2010.
Google Scholar
Gaweł I., Kalabińska M., Piłat J.: Asfalty drogowe. WKiŁ, Warszawa 2001.
Google Scholar
Danowski M.: Nawierzchnie z dodatkiem asfaltu naturalnego Trynidad. Nawierzchnie asfaltowe 2/2009, str. 7-13.
Google Scholar
WT-2: 2013 DRAFT Mieszanki mineralno-asfaltowe. Wymagania techniczne. GDDKiA
Google Scholar
Radziszewski P.: Zmiany właściwości lepkosprężystych lepiszczy modyfikowanych i mieszanek mineralno-asfaltowych w wyniku procesu starzenia. Rozprawy Naukowe Nr 142. Wydawnictwo Politechniki Białostockiej. Białystok 2007.
Google Scholar
WT-2: 2010 Mieszanki mineralno-asfaltowe. Wymagania techniczne. GDDKiA.
Google Scholar
Authors
Michał SarnowskiGroup of Materials and Road Technology; Faculty of Civil Engineering; Warsaw University of Technology Poland
https://orcid.org/0000-0002-2908-7774
Authors
Piotr RadziszewskiGroup of Materials and Road Technology; Faculty of Civil Engineering; Warsaw University of Technology Poland
https://orcid.org/0000-0003-2835-0240
Authors
Jerzy PiłatGroup of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology Poland
Authors
Karol KowalskiGroup of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology Poland
https://orcid.org/0000-0002-9996-3637
Authors
Jan KrólGroup of Materials and Road Technology; Institute of Roads and Bridges; Faculty of Civil Engineering; Warsaw University of Technology Poland
https://orcid.org/0000-0001-8728-3530
Statistics
Abstract views: 600PDF downloads: 363
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.