Influence of concrete topping on behaviour of prestressed Hollow Core floor slabs on flexible supports
Wit Derkowski
Institute of Building Materials and Structures; Faculty of Civil Engineering; Cracow University of Technology (Poland)
https://orcid.org/0000-0001-6133-3624
Mateusz Surma
Institute of Building Materials and Structures; Faculty of Civil Engineering; Cracow University of Technology (Poland)
https://orcid.org/0000-0002-1444-3326
Abstract
Slim Floors (SF) are the structures made of the Hollow Core (HC) slabs supported on the slender beams, where the beam height is usually slightly greater than the height of precast slab element. With the increase of the supports' deflection, the deformation of the HC slab occurs, and in consequence, additional transverse normal and shear stresses appear in the precast element, which can cause a diagonal cracking and destruction of external webs of this element. It may also result in longitudinal cracks on bottom surface of the slab. Despite the frequent implementation of this type of structures, the existing standard EN 1168 gave only a brief record of the need to take the reduction in design shear capacity into account, but is not given any calculation procedure.
It is widely believed that reduction of unfavourable effects of shear stress in the HC slab’s web can be achieved by filling the cores with concrete or arrangement of the monolithic layer or concrete topping. The fib guidelines are practically the only one document which allows to determine the shear capacity of SF slabs, including the influence of concrete topping or core filling – brief description of this design model is presented in the paper. In order to determine the effect of concrete topping on the behaviour of prestressed HC slabs on the flexible supports, a number of calculation analyzes were performed, which take into account the effects of thickness of the concrete topping, the value of the friction coefficient between the concrete topping and the precast element, the sequence of concreting of vertical joints and topping layer and the amount of supplementary reinforcement in the topping. The results of the calculations, and the conclusions derived from them, are presented in the article.
Keywords:
Hollow Core, flexible support, Slim Floor Structures, concrete topping, precast slabsReferences
Pajari M., Koukkari H. Shear resistance of PHC slabs supported on beams I: Tests. Journal of Structures Engineering 9 (1998).
DOI: https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1050)
Google Scholar
Pajari M., Design recommendations for Hollow Core supported on beams. VTT Research Rapport RTE37-IR-2/1995, Espoo, 1995.
Google Scholar
Pajari M. Yang L. Shear capacity of Hollow Core slabs on flexible supports. VTT Research Notes 1587, Espoo 1994.
Google Scholar
Pajari M. Shear resistance of PHC slabs supported on beams II: Analysis. Journal of Structures Engineering 9 (1998).
DOI: https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1062)
Google Scholar
FIB Bulletin 6 Special design considerations for precast prestressed Hollow-Core floors, (2012).
Google Scholar
Pajari M. Shear resistance of prestressed Hollow Core slabs on flexible supports. VTT Publications 228, Espoo, 1995.
Google Scholar
Norma PN-EN 1168:2005+A3 2011 Prefabrykaty z betonu – płyty kanałowe.
Google Scholar
Leskelä M., Pajari M. Reduction of the vertical shear resistance in Hollow-core slabs when supported on beams. Proceedings of Concrete`95 Conference, Brisbane, Australia, 1995.
Google Scholar
Mercx W., Walraven J.C. The bearing capacity of prestressed Hollow Core, Delft, 1983.
Google Scholar
Girhammar U.A. Design principles for simply supported prestressed Hollow Core slabs. Structural Eng. Review 4 (1992).
Google Scholar
Pajari M. Design of prestressed Hollow Core slab. VTT Research Rapport 657, Espoo, 1989.
Google Scholar
Mattock A.H., Hawkins N.M. Shear transfer in reinforced concrete-recent research. PCI Journal 1 (1972).
DOI: https://doi.org/10.15554/pcij.03011972.55.75
Google Scholar
Norma PN-EN 1992-1-+AC2008. Eurokod 2. Projektowanie konstrukcji z betonu. Część 1-1: Reguły ogólne i reguły dla budynków.
Google Scholar
Allgemeine baufsichtliche Zulassung Z-15.10-228 2009.
Google Scholar
Szulc J. Projektowanie prefabrykowanych konstrukcji zespolonych z uwzględnieniem podatności styku i elementów podporowych. Instrukcje Wytyczne Poradniki. ITB, Warszawa 2012.
Google Scholar
Authors
Wit DerkowskiInstitute of Building Materials and Structures; Faculty of Civil Engineering; Cracow University of Technology Poland
https://orcid.org/0000-0001-6133-3624
Authors
Mateusz SurmaInstitute of Building Materials and Structures; Faculty of Civil Engineering; Cracow University of Technology Poland
https://orcid.org/0000-0002-1444-3326
Statistics
Abstract views: 238PDF downloads: 232
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.
