NUMERICAL MODELLING OF RESINS USED IN STEREOLITOGRAPHY RAPID PROTOTYPING
Danuta MIEDZIŃSKA
acs@pollub.pl(Poland)
Ewelina MAŁEK
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Arkadiusz POPŁAWSKI
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Abstract
The presented research deals with the development of the numerical model for resins used for stereolithography (SLA) rapid prototyping. SLA is an additive method of production of models, prototypes, elements or parts of constructions with the use of 3D printing that covers photochemical processes by which light causes chemical monomers to link together to form polymers. Such method is very useful in design visualization, but also can be applied in numerical modelling for the purpose of validation and verification. In this application the resin strength parameters must be described and on the base of them the numerical material model is developed and validated. Such a study for SLA resins was presented in the paper.
Keywords:
stereolithography, numerical modelling, tensile test, resinReferences
Attaran, M. (2017). The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Business Horizons, 60(5), 677–688.
DOI: https://doi.org/10.1016/j.bushor.2017.05.011
Google Scholar
Hallquist, J. O. (2006). LS-DYNA Theory Manual. Livermore Software Technology Corporation.
Google Scholar
ISO/ASTM International Standard. (2015) Additive manufacturing – General Principles – Overview of process categories and feedstock (17296-2:2015(E)).
Google Scholar
Kowalska-Bany, K., & Krokosz, J. (2008). Rapid Prototyping – Historical Overview. Odlewnictwo współczesne – Polska i Świat, 112–118.
Google Scholar
Melchels, F. P. W., Feijena, J., & Grijpmaab, D. W. (2010). A Review on Stereolithography and Its Applications in Biomedical Engineering. Biomaterials, 31, 6121–6130.
DOI: https://doi.org/10.1016/j.biomaterials.2010.04.050
Google Scholar
Nee, A. Y. C., & Fuh, J. Y. H., & Miyazawa, T. (2001). On the improvement of the stereolithography (SL) process. Journal of Materials Processing Technology, 113(1–3), 262–268.
DOI: https://doi.org/10.1016/S0924-0136(01)00634-3
Google Scholar
Authors
Ewelina MAŁEKMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Authors
Arkadiusz POPŁAWSKIMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Statistics
Abstract views: 149PDF downloads: 25
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Mateusz Sawa, Mirosław Szala, Weronika Henzler, INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY , Applied Computer Science: Vol. 17 No. 3 (2021)
- Lukas BAUER, Leon STÜTZ, Markus KLEY, BLACK BOX EFFICIENCY MODELLING OF AN ELECTRIC DRIVE UNIT UTILIZING METHODS OF MACHINE LEARNING , Applied Computer Science: Vol. 17 No. 4 (2021)
- Wiesław FRĄCZ, Grzegorz JANOWSKI, Grażyna RYZIŃSKA, THE POSSIBILITY OF USING WOOD FIBER MATS IN PRODUCTS MANUFACTURING MADE OF POLYMER COMPOSITES BASED ON NUMERICAL SIMULATIONS , Applied Computer Science: Vol. 13 No. 4 (2017)
- Anna MACHROWSKA, Robert KARPIŃSKI, Józef JONAK, Jakub SZABELSKI, NUMERICAL PREDICTION OF THE COMPONENT-RATIO-DEPENDENT COMPRESSIVE STRENGTH OF BONE CEMENT , Applied Computer Science: Vol. 16 No. 3 (2020)
- Sana KOUBAA, Jamel MARS, Fakhreddine DAMMAK, EFFICIENT NUMERICAL MODELLING OF FUNCTIONALLY GRADED SHELL MECHANICAL BEHAVIOR , Applied Computer Science: Vol. 15 No. 1 (2019)
- Paweł BAŁON, Edward REJMAN, Bartłomiej KIEŁBASA, Janusz SZOSTAK, Robert SMUSZ, NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE STRENGTH OF TANKS DEDICATED TO HOT UTILITY WATER , Applied Computer Science: Vol. 14 No. 4 (2018)
- Łukasz WÓJCIK, Zbigniew PATER, LIMITING VALUE OF COCKROFT-LATHAM INTEGRAL FOR COMMERCIAL PLASTICINE , Applied Computer Science: Vol. 13 No. 4 (2017)
- Zbigniew CZYŻ, Paweł KARPIŃSKI, Tacetdin SEVDIM, NUMERICAL ANALYSIS OF THE DRAG COEFFICIENT OF A MOTORCYCLE HELMET , Applied Computer Science: Vol. 14 No. 1 (2018)
- Bartosz KAWECKI, Jerzy PODGÓRSKI, NUMERICAL RESULTS QUALITY IN DEPENDENCE ON ABAQUS PLANE STRESS ELEMENTS TYPE IN BIG DISPLACEMENTS COMPRESSION TEST , Applied Computer Science: Vol. 13 No. 4 (2017)
- Anitha Rani PALAKAYALA, Kuppusamy P, A QUALITATIVE AND QUANTITATIVE APPROACH USING MACHINE LEARNING AND NON-MOTOR SYMPTOMS FOR PARKINSON’S DISEASE CLASSIFICATION. A HIERARCHICAL STUDY , Applied Computer Science: Vol. 20 No. 3 (2024)
You may also start an advanced similarity search for this article.
