NUMERICAL MODELLING OF RESINS USED IN STEREOLITOGRAPHY RAPID PROTOTYPING
Danuta MIEDZIŃSKA
acs@pollub.pl(Poland)
Ewelina MAŁEK
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Arkadiusz POPŁAWSKI
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Abstract
The presented research deals with the development of the numerical model for resins used for stereolithography (SLA) rapid prototyping. SLA is an additive method of production of models, prototypes, elements or parts of constructions with the use of 3D printing that covers photochemical processes by which light causes chemical monomers to link together to form polymers. Such method is very useful in design visualization, but also can be applied in numerical modelling for the purpose of validation and verification. In this application the resin strength parameters must be described and on the base of them the numerical material model is developed and validated. Such a study for SLA resins was presented in the paper.
Keywords:
stereolithography, numerical modelling, tensile test, resinReferences
Attaran, M. (2017). The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Business Horizons, 60(5), 677–688.
DOI: https://doi.org/10.1016/j.bushor.2017.05.011
Google Scholar
Hallquist, J. O. (2006). LS-DYNA Theory Manual. Livermore Software Technology Corporation.
Google Scholar
ISO/ASTM International Standard. (2015) Additive manufacturing – General Principles – Overview of process categories and feedstock (17296-2:2015(E)).
Google Scholar
Kowalska-Bany, K., & Krokosz, J. (2008). Rapid Prototyping – Historical Overview. Odlewnictwo współczesne – Polska i Świat, 112–118.
Google Scholar
Melchels, F. P. W., Feijena, J., & Grijpmaab, D. W. (2010). A Review on Stereolithography and Its Applications in Biomedical Engineering. Biomaterials, 31, 6121–6130.
DOI: https://doi.org/10.1016/j.biomaterials.2010.04.050
Google Scholar
Nee, A. Y. C., & Fuh, J. Y. H., & Miyazawa, T. (2001). On the improvement of the stereolithography (SL) process. Journal of Materials Processing Technology, 113(1–3), 262–268.
DOI: https://doi.org/10.1016/S0924-0136(01)00634-3
Google Scholar
Authors
Ewelina MAŁEKMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Authors
Arkadiusz POPŁAWSKIMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Statistics
Abstract views: 207PDF downloads: 26
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Błażej CZAJKA, Patryk RÓŻYŁO, Hubert DĘBSKI, STABILITY AND FAILURE OF THIN-WALLED COMPOSITE STRUCTURES WITH A SQUARE CROSS-SECTION , Applied Computer Science: Vol. 18 No. 2 (2022)
- Edyta ŁUKASIK, Emilia ŁABUĆ, ANALYSIS OF THE POSSIBILITY OF USING THE SINGULAR VALUE DECOMPOSITION IN IMAGE COMPRESSION , Applied Computer Science: Vol. 18 No. 4 (2022)
- Sebastian BIAŁASZ, Ramon PAMIES, NUMERICAL SIMULATION OF THE DESIGN OF EXTRUSION PROCESS OF POLYMERIC MINI-TUBES , Applied Computer Science: Vol. 14 No. 3 (2018)
- Kuba ROSŁANIEC, ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE , Applied Computer Science: Vol. 18 No. 1 (2022)
- Tomasz BULZAK, Zbigniew PATER, Janusz TOMCZAK, NEW EXTRUSION PROCESS FOR PRODUCING TWIST DRILLS USING SPLIT DIES , Applied Computer Science: Vol. 13 No. 3 (2017)
- Marcin KLIMEK, PRIORITY ALGORITHMS FOR THE PROBLEM OF FINANCIAL OPTIMISATION OF A MULTI STAGE PROJECT , Applied Computer Science: Vol. 13 No. 4 (2017)
- Jarosław ZUBRZYCKI, Natalia SMIDOVA, Jakub LITAK, Andrei AUSIYEVICH, NUMERICAL ANALYSIS OF SPINAL LOADS IN SPONDYLOLISTHESIS TREATMENT USING PEDICLE SCREWS – PRELIMINARY RESEARCH , Applied Computer Science: Vol. 13 No. 3 (2017)
- Rafał KWOKA, Janusz KOZAK, Michał MAJKA, TESTS OF HTS 2G SUPERCONDUCTING TAPES USING THE LABVIEW ENVIRONMENT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Anna CZARNECKA, Łukasz SOBASZEK, Antoni ŚWIĆ, 2D IMAGE-BASED INDUSTRIAL ROBOT END EFFECTOR TRAJECTORY CONTROL ALGORITHM , Applied Computer Science: Vol. 14 No. 1 (2018)
- Isaac FLORES-HERNÁNDEZ, Edmundo BONILLA-HUERTA, Perfecto MALAQUIAS QUINTERO-FLORES, Oscar Atriano PONCE, José Crispín HERNÁNDEZ-HERNÁNDEZ, APPLYING INTELLIGENT TECHNIQUES FOR TALENT RECRUITMENT , Applied Computer Science: Vol. 15 No. 2 (2019)
You may also start an advanced similarity search for this article.
