NUMERICAL MODELLING OF RESINS USED IN STEREOLITOGRAPHY RAPID PROTOTYPING
Danuta MIEDZIŃSKA
acs@pollub.pl(Poland)
Ewelina MAŁEK
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Arkadiusz POPŁAWSKI
Military University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw (Poland)
Abstract
The presented research deals with the development of the numerical model for resins used for stereolithography (SLA) rapid prototyping. SLA is an additive method of production of models, prototypes, elements or parts of constructions with the use of 3D printing that covers photochemical processes by which light causes chemical monomers to link together to form polymers. Such method is very useful in design visualization, but also can be applied in numerical modelling for the purpose of validation and verification. In this application the resin strength parameters must be described and on the base of them the numerical material model is developed and validated. Such a study for SLA resins was presented in the paper.
Keywords:
stereolithography, numerical modelling, tensile test, resinReferences
Attaran, M. (2017). The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Business Horizons, 60(5), 677–688.
DOI: https://doi.org/10.1016/j.bushor.2017.05.011
Google Scholar
Hallquist, J. O. (2006). LS-DYNA Theory Manual. Livermore Software Technology Corporation.
Google Scholar
ISO/ASTM International Standard. (2015) Additive manufacturing – General Principles – Overview of process categories and feedstock (17296-2:2015(E)).
Google Scholar
Kowalska-Bany, K., & Krokosz, J. (2008). Rapid Prototyping – Historical Overview. Odlewnictwo współczesne – Polska i Świat, 112–118.
Google Scholar
Melchels, F. P. W., Feijena, J., & Grijpmaab, D. W. (2010). A Review on Stereolithography and Its Applications in Biomedical Engineering. Biomaterials, 31, 6121–6130.
DOI: https://doi.org/10.1016/j.biomaterials.2010.04.050
Google Scholar
Nee, A. Y. C., & Fuh, J. Y. H., & Miyazawa, T. (2001). On the improvement of the stereolithography (SL) process. Journal of Materials Processing Technology, 113(1–3), 262–268.
DOI: https://doi.org/10.1016/S0924-0136(01)00634-3
Google Scholar
Authors
Ewelina MAŁEKMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Authors
Arkadiusz POPŁAWSKIMilitary University of Technology, Faculty of Mechanical Engineering, Kaliskiego 2 St., Warsaw Poland
Statistics
Abstract views: 207PDF downloads: 26
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Marian JANCZAREK, COMPUTER MODELLING OF THERMAL TECHNICAL SPACESS IN ASPECT OF HEAT TRANSFER THROUGH THE WALLS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Sebastian BIAŁASZ, INJECTION SIMULATION FOR THE MOLD PROCESS IN THE MEDICAL INDUSTRY , Applied Computer Science: Vol. 14 No. 3 (2018)
- Marcin KLIMEK, PRIORITY ALGORITHMS FOR THE PROBLEM OF FINANCIAL OPTIMISATION OF A MULTI STAGE PROJECT , Applied Computer Science: Vol. 13 No. 4 (2017)
- Anna CZARNECKA, Łukasz SOBASZEK, Antoni ŚWIĆ, 2D IMAGE-BASED INDUSTRIAL ROBOT END EFFECTOR TRAJECTORY CONTROL ALGORITHM , Applied Computer Science: Vol. 14 No. 1 (2018)
- Irena NOWOTYŃSKA, Stanisław KUT, COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION , Applied Computer Science: Vol. 14 No. 4 (2018)
- Rafał KWOKA, Janusz KOZAK, Michał MAJKA, TESTS OF HTS 2G SUPERCONDUCTING TAPES USING THE LABVIEW ENVIRONMENT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Marcin Topczak, Małgorzata Śliwa, ASSESSMENT OF THE POSSIBILITY OF USING BAYESIAN NETS AND PETRI NETS IN THE PROCESS OF SELECTING ADDITIVE MANUFACTURING TECHNOLOGY IN A MANUFACTURING COMPANY , Applied Computer Science: Vol. 17 No. 1 (2021)
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Moon-gee CHOI, USE OF SERIOUS GAMES FOR THE ASSESSMENT OF MILD COGNITIVE IMPAIRMENT IN THE ELDERLY , Applied Computer Science: Vol. 18 No. 2 (2022)
- Edyta ŁUKASIK, Wiktor FLIS, EFFICIENCY COMPARISON OF NETWORKS IN HANDWRITTEN LATIN CHARACTERS RECOGNITION WITH DIACRITICS , Applied Computer Science: Vol. 19 No. 4 (2023)
You may also start an advanced similarity search for this article.
