FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS
Damian KRASKA
kraska94@gmail.comRzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów (Poland)
Tomasz TRZEPIECIŃSKI
* Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów (Poland)
Abstract
In this paper the sheet forming process of cylindrical drawpieces was sim-ulated based on the finite element method by the explicit approach in the presence of contact conditions with isotropic and anisotropic friction. The experimental and numerical results obtained in the Abaqus finite element (FE) based program are presented. The aim of the experimental study is to analyse material behaviour under deformation and in addition to use the results to verify numerical simulation results. It was found that, although, the anisotropy of resistance to friction affects the height of ears, the influence of the friction formulation is relatively small in comparison with material anisotropy. The study indicates that FE analysis with 3-node triangular shell element S3R elements ensures the best approximation of the numerical results to the real process when both material and friction anisotropy are taken into account.
Keywords:
deep-drawing, finite element method, sheet metal formingReferences
Affronti, E., & Merklein, M. (2018). Analysis of the bending effects and the biaxial pre-straining in sheet metal stretch forming processes for the determination of the forming limits. International Journal of Mechanical Sciences, 138–139, 295–309. https://doi.org/10.1016/j.ijmecsci.2018.02.024
DOI: https://doi.org/10.1016/j.ijmecsci.2018.02.024
Google Scholar
Banabic, D. (2010). Sheet metal forming processes. Constitutive modelling and numerical simulation. Berlin Heidelberg: Springer-Verlag.
DOI: https://doi.org/10.1007/978-3-540-88113-1
Google Scholar
Falsafi, J., Demirci, E., & Silberschmidt, V. V. (2016). Computational assessment of residual formability in sheet metal forming processes for sustainable recycling. International Journal of Mechanical Sciences, 119, 187–196. https://doi.org/10.1016/j.ijmecsci.2016.10.013
DOI: https://doi.org/10.1016/j.ijmecsci.2016.10.013
Google Scholar
Hattalli, V. L., & Srivatsa, S. R. (2018). Sheet metal forming processes – recent technological advances. Materials Today – Proceedings, 5(1), 2564–2574. https://doi.org/10.1016/j.matpr.2017.11. 040
DOI: https://doi.org/10.1016/j.matpr.2017.11.040
Google Scholar
Hill, R. (1948). A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society A, 193, 281–297. https://doi.org/10.1098/rspa.1948.0045
DOI: https://doi.org/10.1098/rspa.1948.0045
Google Scholar
Larsson, M. (2009). Computational characterization of drawbeads: A basic modelling method for data generation. Journal of Materials Processing Technology, 209(1), 376–386. https://doi.org/10.1016/j.jmatprotec.2008.02.009
DOI: https://doi.org/10.1016/j.jmatprotec.2008.02.009
Google Scholar
Li, P., He, J., Liu, Q., Yang, M., Wang, Q., Yuan, Q., & Li, Y. (2017). Evaluation of forming forces in ultrasonic incremental sheet metal forming. Aerospace Science and Technology, 63, 132–139. https://doi.org/10.1016/j.ast.2016.12.028
DOI: https://doi.org/10.1016/j.ast.2016.12.028
Google Scholar
Ramzi, B. H., Sebastien, T., Fabrice, R., Gemala, H., & Pierrick, M. (2017). Numerical prediction of the forming limit diagrams of thin sheet metal using SPIF tests. Procedia Engineering, 183, 113–118. https://doi.org/10.1016/j.proeng.2017.04.029
DOI: https://doi.org/10.1016/j.proeng.2017.04.029
Google Scholar
Trzepieciński, T., & Gelgele, H. L. (2011). Investigation of anisotropy problems in sheet metal forming using finite element method. International Journal of Material Forming, 4(4), 357–369. https://doi.org/10.1007/s12289-010-0994-7
DOI: https://doi.org/10.1007/s12289-010-0994-7
Google Scholar
von Mises, R. (1913). Mechanik der festen Kö¨rper im plastisch deformablen Zustand. Nachrichten von der Köngl. Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse 1913, 582–592.
Google Scholar
Authors
Damian KRASKAkraska94@gmail.com
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów Poland
Authors
Tomasz TRZEPIECIŃSKI* Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów Poland
Statistics
Abstract views: 547PDF downloads: 14
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Dias Satria, PREDICTING BANKING STOCK PRICES USING RNN, LSTM, AND GRU APPROACH , Applied Computer Science: Vol. 19 No. 1 (2023)
- Hamid JAN, Amjad ALI, OPTIMIZATION OF FINGERPRINT SIZE FOR REGISTRATION , Applied Computer Science: Vol. 15 No. 2 (2019)
- Workineh TESEMA, INEFFICIENCY OF DATA MINING ALGORITHMS AND ITS ARCHITECTURE: WITH EMPHASIS TO THE SHORTCOMING OF DATA MINING ALGORITHMS ON THE OUTPUT OF THE RESEARCHES , Applied Computer Science: Vol. 15 No. 3 (2019)
- Marcin TOMCZYK, Anna PLICHTA, Mariusz MIKULSKI, APPLICATION OF IMAGE ANALYSIS TO THE IDENTIFICATION OF MASS INERTIA MOMENTUM IN ELECTROMECHANICAL SYSTEM WITH CHANGEABLE BACKLASH ZONE , Applied Computer Science: Vol. 15 No. 3 (2019)
- Jarosław WIKAREK, Paweł SITEK, Mieczysław JAGODZIŃSKI, A DECLARATIVE APPROACH TO SHOP ORDERS OPTIMIZATION , Applied Computer Science: Vol. 15 No. 4 (2019)
- Mouna TARIK, Ayoub MNIAI, Khalid JEBARI, HYBRID FEATURE SELECTION AND SUPPORT VECTOR MACHINE FRAMEWORK FOR PREDICTING MAINTENANCE FAILURES , Applied Computer Science: Vol. 19 No. 2 (2023)
- Abdelrahman Halawa, Shehab Gamalel-Din, Abdurrahman Nasr, EXPLOITING BERT FOR MALFORMED SEGMENTATION DETECTION TO IMPROVE SCIENTIFIC WRITINGS , Applied Computer Science: Vol. 19 No. 2 (2023)
- Nouhaila BOUALOULOU, Taoufiq BELHOUSSINE DRISSI, Benayad NSIRI, CNN AND LSTM FOR THE CLASSIFICATION OF PARKINSON'S DISEASE BASED ON THE GTCC AND MFCC , Applied Computer Science: Vol. 19 No. 2 (2023)
- Qingyu Liu, Roben A. Juanatas, MASK FACE INPAINTING BASED ON IMPROVED GENERATIVE ADVERSARIAL NETWORK , Applied Computer Science: Vol. 19 No. 2 (2023)
- Rafał KWOKA, Janusz KOZAK, Michał MAJKA, TESTS OF HTS 2G SUPERCONDUCTING TAPES USING THE LABVIEW ENVIRONMENT , Applied Computer Science: Vol. 14 No. 1 (2018)
You may also start an advanced similarity search for this article.
