USEFULNESS OF MODAL ANALYSIS FOR EVALUATION OF MILLING PROCESS STABILITY

Paweł PIEŚKO; Magdalena ZAWADA-MICHAŁOWSKA

doi:10.23743/acs-2017-07

Open full text

pdf

Published: Mar 30, 2017

DOI: https://doi.org/10.23743/acs-2017-07

DOI

https://doi.org/10.23743/acs-2017-07

Authors

Paweł PIEŚKO

p.piesko@pollub.pl

Department of Production Engineering, Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin

Magdalena ZAWADA-MICHAŁOWSKA

m.michalowska@pollub.pl

Department of Production Engineering, Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin

Abstract

The paper presents evaluation of modal analysis usefulness for determination of milling process stability. In the first phase of the study experimental modal analysis was performed and using CutPro 9.5 software, stability lobes were generated. In the next step, machining tests were carried out. The last stage of the experiment involved verification of modal analysis usefulness for evaluation of milling process stability based on surface roughness measurements. Conducted research allowed to state that modal analysis can be a useful tool for determining milling process stability.

Keywords:

modal analysis, stability, milling process, surface roughness

References

Ahmadi, K., & Ismail, F. (2012). Stability lobes in milling including process damping and utilizing Multi-Frequency and Semi-Discretization Methods. International Journal of Machine Tools & Manufacture, 54-55, 46–54. https://doi.org/10.1016/j.ijmachtools.2011.11.007 DOI: https://doi.org/10.1016/j.ijmachtools.2011.11.007

Bojanowski, S., & Pawłowski, W. (2011). Teoretyczna analiza modalna zespołu wrzeciennika przedmiotu szlifierki do otworów. Mechanik, 84(11), 870-873.

Budak, E., Tunc, L. T., Alan, S., & Ozguven, H. N. (2012). Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Annals-Manufacturing Technology, 61(1), 339–342. https://doi.org/10.1016/j.cirp.2012.03.144 DOI: https://doi.org/10.1016/j.cirp.2012.03.144

Campa, F. J., de Lacalle, L. N. L., & Celaya, A. (2011). Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams. International Journal of Machine Tools & Manufacture, 51(1), 43–53. https://doi.org/10.1016/j.ijmachtools.2010.09.008 DOI: https://doi.org/10.1016/j.ijmachtools.2010.09.008

Ciurana, J. & Quintana, G. (2011). Chatter in machining processes: A review. International Journal of Machine Tools and Manufacture, 51(5), 363–376. https://doi.org/10.1016/j.ijmachtools.2011.01.001 DOI: https://doi.org/10.1016/j.ijmachtools.2011.01.001

Kilic, Z. M., & Altintas, Y. (2016). Generalized mechanics and dynamics of metal cutting operations for unified simulations. International Journal of Machine Tools & Manufacture, 104, 1–13. https://doi.org/10.1016/j.ijmachtools.2016.01.006 DOI: https://doi.org/10.1016/j.ijmachtools.2016.01.006

Lehrich, K., & Lis, K. (2014). Analiza modalna korpusu stojaka obrabiarki CNC. Inżynieria Maszyn, 19(1), 20-33.

Maamar, A., Bouzgarrou, B. C., Gagnol, V., & Fathallah, R. (2017). Time Domain Stability Analysis for Machining Processes. Advances in Acoustics and Vibration, 5, 77–88. https://doi.org/10.1007/978-3-319-41459-1_8 DOI: https://doi.org/10.1007/978-3-319-41459-1_8

Płodzień, M., & Żyłka, Ł. (2013). Stabilność 5-osiowego frezowania stopów aluminium. Mechanik, 86(2), 1–12.

Polish Norm: PN-EN 485-2:2016-10. Aluminium and aluminium alloys. Sheet, strip and plate. Part 2: Mechanical properties.

Polish Norm: PN-EN 573-3:2014-02. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 3: Chemical composition and form of products. Seger online catalog. (n.d.). Retrieved November 30, 2016, from Seger website, http://www.seger.net.pl/pl

SGS online catalog. (n.d.). Retrieved November 30, 2016, from SGS Solid Carbide Tools website, http://sgstool.com

Sun, Y., & Xiong, Z. (2017). High-order full-discretization method using Lagrange interpolation for stability analysis of turning processes with stiffness variation. Journal of Sound and Vibration, 386, 50–64. https://doi.org/10.1016/j.jsv.2016.08.039 DOI: https://doi.org/10.1016/j.jsv.2016.08.039

Totis, G., Albertelli, P., Sortino, M., & Monno, M. (2014). Efficient evaluation of Process stability in milling with Spindle Speed Variation by using the Chebyshev Collocation Method. Journal of Sound and Vibration, 333(3), 646–668. https://doi.org/10.1016/j.jsv.2013.09.043 DOI: https://doi.org/10.1016/j.jsv.2013.09.043

Totis, G., Albertelli, P., Torta, M., Sortino, M., & Monno, M. (2017). Upgraded stability analysis of milling operations by means of advanced modeling of tooling system bending. International Journal of Machine Tools & Manufacture, 113, 19–34. https://doi.org/10.1016/j.ijmachtools.2016.11.005 DOI: https://doi.org/10.1016/j.ijmachtools.2016.11.005

Twardowski, P. (2006). Stabilność procesu frezowania stali na twardo w warunkach HSM. Archiwum Technologii Maszyn i Automatyzacji, 26(2), 93–101.

Zhang, X. J., Xiong, C. H., Ding, Y., Feng, M. J., & Xiong, Y. L. (2012). Milling stability analysis with simultaneously considering the structural mode coupling effect and regenerative effect. International Journal of Machine Tools & Manufacture, 53(1), 127–140. https://doi.org/10.1016/j.ijmachtools.2011.10.004 DOI: https://doi.org/10.1016/j.ijmachtools.2011.10.004

PIEŚKO, P., & ZAWADA-MICHAŁOWSKA, M. (2017). USEFULNESS OF MODAL ANALYSIS FOR EVALUATION OF MILLING PROCESS STABILITY. Applied Computer Science, 13(1), 75–84. https://doi.org/10.23743/acs-2017-07

Article Sidebar

Main Article Content

DOI

Authors

Abstract

Keywords:

References

Article Details

License