A SIMULATION EXPERIMENT AND MULTI-CRITERIA ASSESSMENT OF MANUFACTURING PROCESS FLOW VARIANTS TESTED ON A COMPUTER MODEL
Sławomir KUKLA
skukla@ath.bielsko.plDepartment of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała (Poland)
Marek SMETANA
Department of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, (Czechia)
Abstract
The article presents issues relating to designing and improvement of manufacturing processes based on a modelling and simulation method. The 3D model of a production line has been designed and simulation experiment, conducted on the Arena model prepared in a versatile package for modelling and simulation of manufacturing systems and representing functioning of the system, has been carried out. The results obtained from the experiment and analyses of time and ergonomics of work at a work station were subject to multi-criteria assessment based on a point-by-point method of assessment according to Yager.
Keywords:
computer model, simulation experiment, multi-criteria assessmentReferences
Dennis, P. (2016). Lean Production simplified. Boca Raton: CRC Press Taylor &Francis Group.
Google Scholar
Dima, I., Man, M. (2015). Modelling and simulation in management. Switzerland: Springer International Publishing.
DOI: https://doi.org/10.1007/978-3-319-16592-9
Google Scholar
Falzon, P. (2015). Constructive ergonomics. Boca Raton: CRC Press.
DOI: https://doi.org/10.1201/b17456
Google Scholar
Kelton, W. D., Sadowski, R. P., & Sturrock, D. T. (2007). Simulation with ARENA. New York: McGraw-Hill Inc.
Google Scholar
Kłos, S., Patalas-Maliszewska, J., & Trebuna, P. (2016). Improving manufacturing processes using simulation methods. Applied Computer Science, 12(4), 7–17.
Google Scholar
Kukla, S. (2014). Multi-criterion assessment of different variants of casts manufacturing processes. Archives of Foundry Engineering, 14(3), 47–50.
DOI: https://doi.org/10.2478/afe-2014-0060
Google Scholar
Kukla, S. (2016). Quality and safety assurance of iron casts and manufacturing processes. Archives of Foundry Engineering, 16(2), 17–20.
DOI: https://doi.org/10.1515/afe-2016-0019
Google Scholar
Maciąg, A., Piertroń, R., & Kukla, S. (2013). Prognozowanie i symulacja w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Manas, J. (2015). The resource management and capacity planning handbook. USA: McGraw-Hill Companies.
Google Scholar
Pisz, I., Sęk, T., & Zielecki, W. (2013). Logistyka w przedsiębiorstwie. Warszawa: Polskie Wydawnictwo Ekonomiczne.
Google Scholar
Plinta, D. (2015). Modelowanie i symulacja procesów produkcyjnych. Bielsko-Biała: Wydawnictwo Naukowe Akademii Techniczno-Humanistycznej.
Google Scholar
Rainey, L. B., Tolk, A. (2015). Modeling and simulation support for system of systems engineering applications. New Jersey: John Wiley & Sons.
DOI: https://doi.org/10.1002/9781118501757
Google Scholar
Rossetti, M. D. (2016). Simulation modelling and Arena. New Jersey: John Wiley& Sons.
Google Scholar
Sobaszek, Ł., & Gola, A. (2015). Computer-aided production task scheduling. Applied Computer Science, 11(4), 58–69.
Google Scholar
Authors
Sławomir KUKLAskukla@ath.bielsko.pl
Department of Production Engineering, University of Bielsko-Biala,ul. Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Marek SMETANADepartment of Civil Protection, Faculty of Safety Engineering, VŠB – Technical University of Ostrava, Czechia
Statistics
Abstract views: 499PDF downloads: 8
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Katarzyna GOSPODAREK, DETERMINATION OF RELATIVE LENGTHS OF BONE SEGMENTS OF THE DOMESTIC CAT'S LIMBS BASED ON THE DIGITAL IMAGE ANALYSIS , Applied Computer Science: Vol. 15 No. 2 (2019)
- Lubna RIYAZ, Muheet Ahmed BUTT, Majid ZAMAN, IMPROVING CORONARY HEART DISEASE PREDICTION BY OUTLIER ELIMINATION , Applied Computer Science: Vol. 18 No. 1 (2022)
- Francisco Javier MORENO ARBOLEDA, Georgia GARANI, Sergio Andrés ARBOLEDA ZULUAGA , EXPLORING THE EXPEDIENCY OF BLOCKCHAIN-BASED SOLUTIONS: REVIEW AND CHALLENGES , Applied Computer Science: Vol. 20 No. 4 (2024)
- Tomasz SEDERYN, Małgorzata SKAWIŃSKA, COMPUTATIONAL ANALYSIS OF PEM FUEL CELL UNDER DIFFERENT OPERATING CONDITIONS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Robert KARPIŃSKI, Józef JONAK, Jacek MAKSYMIUK, MEDICAL IMAGING AND 3D RECONSTRUCTION FOR OBTAINING THE GEOMETRICAL AND PHYSICAL MODEL OF A CONGENITAL BILATERAL RADIO-ULNAR SYNOSTOSIS , Applied Computer Science: Vol. 14 No. 1 (2018)
- Andrij MILENIN, PARALLEL SOLUTION OF THERMOMECHANICAL INVERSE PROBLEMS FOR LASER DIELESS DRAWING OF ULTRA-THIN WIRE , Applied Computer Science: Vol. 18 No. 3 (2022)
- Danuta MIEDZIŃSKA, Ewelina MAŁEK, Arkadiusz POPŁAWSKI, NUMERICAL MODELLING OF RESINS USED IN STEREOLITOGRAPHY RAPID PROTOTYPING , Applied Computer Science: Vol. 15 No. 4 (2019)
- Wafaa Mustafa HAMEED, Asan Baker KANBAR, USING GA FOR EVOLVING WEIGHTS IN NEURAL NETWORKS , Applied Computer Science: Vol. 15 No. 3 (2019)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
- Błażej CZAJKA, Patryk RÓŻYŁO, Hubert DĘBSKI, STABILITY AND FAILURE OF THIN-WALLED COMPOSITE STRUCTURES WITH A SQUARE CROSS-SECTION , Applied Computer Science: Vol. 18 No. 2 (2022)
<< < 10 11 12 13 14 15 16 17 18 19 > >>
You may also start an advanced similarity search for this article.
