PRODUCTION PLANNING IN CONDITIONS OF MASS CUSTOMIZATION BASED ON THEORY OF CONSTRAINTS
Janusz MLECZKO
jmleczko@ath.bielsko.pl*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała (Poland)
Paweł BOBIŃSKI
LiuGong Dressta Machinery, Stalowa Wola (Poland)
Abstract
In accordance with the requirements of the modern market, small and medium-sized enterprises (SMEs) need to offer a wide range of products tailored to the specific and individual requirements. The success of many enterprises, which work in mass production system and use economic effect of scale production slowly is a thing of the past. There are many enterprises, generally small and medium manufacturing in unit and small batch production, for which it is necessary to develop optimal methods of production planning, taking into account the flexible production requirements, matched to the time-varying customer’s demand. The article presents the production planning based on TOC in conditions of mass customization. Presented solutions are used in modern practice.
Keywords:
mass customization, computer aided planning, TOCReferences
Da Silveira, G., Borenstein, D., & Fogliatto, F. S. (2001). Mass customization: Literature review and research directions. Int. J. Production Economics, 72, 1–13. https://doi.org/10.1016/ S0925-5273(00)00079-7
DOI: https://doi.org/10.1016/S0925-5273(00)00079-7
Google Scholar
Fogliatto, F., Da Silveira, G. & Borenstein. D. (2012). The mass customization decade: An updated review of the literature. International Journal of Production Economics, 138, 14–25. https://doi.org/10.1016/ j.ijpe.2012.03.002
DOI: https://doi.org/10.1016/j.ijpe.2012.03.002
Google Scholar
Haug, A., Ladeby, K., & Edwards, K. (2009). From engineer‐ to‐ order to mass customization. Management Research News, 32(7), 633–644. https://doi.org/10.1108/01409170910965233
DOI: https://doi.org/10.1108/01409170910965233
Google Scholar
Kumar, A., (2007). Mass customization: manufacturing issues and taxonomic analyses. Int. J. Flex. Manuf. Syst., 19, 625–629. https://doi.org/10.1007/s10696-008-9049-5
DOI: https://doi.org/10.1007/s10696-008-9049-5
Google Scholar
Luo, X., Tu, Y., Tang, J., & Kwong, C. K., (2008). Optimizing customer’s selection for configurable product in B2C e-commerce application. Computers in Industry, 59, 767–776. https://doi.org/10.1016/j.compind.2008.03.003
DOI: https://doi.org/10.1016/j.compind.2008.03.003
Google Scholar
Mleczko, J., (2014). Manufacturing processes creating with use of dynamic classification in conditions of unit and small-batch production. Bielsko-Biała: Publishing House of University of Bielsko-Biała.
Google Scholar
Peng, D. G., Heim, G. (2011). Impacts of information technology on mass customization capability of manufacturing plants. International Journal of Operations& Production Management, 31(10), 1022–1047. https://doi.org/10.1108/01443571111182173
DOI: https://doi.org/10.1108/01443571111182173
Google Scholar
Tien, J. M., (2011). Manufacturing and services: From mass production to mass customization. Journal of Systems Science and Systems Engineering, 20(2), 129-154. https://doi.org/10.1007/s11518-011-5166-x
DOI: https://doi.org/10.1007/s11518-011-5166-x
Google Scholar
Authors
Janusz MLECZKOjmleczko@ath.bielsko.pl
*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała Poland
Authors
Paweł BOBIŃSKILiuGong Dressta Machinery, Stalowa Wola Poland
Statistics
Abstract views: 196PDF downloads: 53
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
Similar Articles
- Raphael Olufemi AKINYEDE, Temitayo Elijah BALOGUN, Abiodun Boluwade ROTIMI, Oluwasefunmi Busola FAMODIMU, A CUSTOMER-CENTRIC APPLICATION FOR A CINEMA HOUSE , Applied Computer Science: Vol. 16 No. 2 (2020)
- Waldemar SUSZYŃSKI, Małgorzata CHARYTANOWICZ, Wojciech ROSA, Leopold KOCZAN, Rafał STĘGIERSKI, DETECTION OF FILLERS IN THE SPEECH BY PEOPLE WHO STUTTER , Applied Computer Science: Vol. 17 No. 4 (2021)
- Przemysław KRAKOWSKI, Józef JONAK, Robert KARPIŃSKI, Łukasz JAWORSKI, USEFULNESS OF RAPID PROTOTYPING IN PLANNING COMPLEX TRAUMA SURGERIES , Applied Computer Science: Vol. 15 No. 3 (2019)
- Ali Fattah DAKHIL, Weffa Muhammed ALI, Ali Atshan Abdul REDA, PRIORITIZING SOFTWARE CAPABILITIES AND FOCAL POINTS OF MS ACCESS AND EXCEL IN PERSPECTIVE OF DATA MANAGEMENT , Applied Computer Science: Vol. 14 No. 3 (2018)
- Elizabeth Perez, Juan A. Araiza, Dreysy Pozos, Edmundo Bonilla, Jose C. Hernandez, Jesus A. Cortes, APPLICATION FOR FUNCTIONALITY AND REGISTRATION IN THE CLOUD OF A MICROCONTROLLER DEVELOPMENT BOARD FOR IOT IN AWS , Applied Computer Science: Vol. 17 No. 2 (2021)
- Marian JANCZAREK, Oleksij BULYANDRA, COMPUTER AIDED THERMAL PROCESSES IN TECHNICAL SPACES , Applied Computer Science: Vol. 13 No. 2 (2017)
- Marcin TOMCZYK, Anna PLICHTA, Mariusz MIKULSKI, APPLICATION OF IMAGE ANALYSIS TO THE IDENTIFICATION OF MASS INERTIA MOMENTUM IN ELECTROMECHANICAL SYSTEM WITH CHANGEABLE BACKLASH ZONE , Applied Computer Science: Vol. 15 No. 3 (2019)
- Muayed S AL-HUSEINY, Ahmed S SAJIT, BREAST CANCER CAD SYSTEM BY USING TRANSFER LEARNING AND ENHANCED ROI , Applied Computer Science: Vol. 18 No. 1 (2022)
- Marcin TOMCZYK, Barbara BOROWIK, Mariusz MIKULSKI, IDENTIFICATION OF A BACKLASH ZONE IN AN ELECTROMECHANICAL SYSTEM CONTAINING CHANGES OF A MASS INERTIA MOMENT BASED ON A WAVELET–NEURAL METHOD , Applied Computer Science: Vol. 14 No. 4 (2018)
- Przemysław KRAKOWSKI, Robert KARPIŃSKI, Marcin MACIEJEWSKI, APPLICATIONS OF MODERN IMAGING TECHNOLOGY IN ORTHOPAEDIC TRAUMA SURGERY , Applied Computer Science: Vol. 14 No. 3 (2018)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
